PS/2 keyboard not working in ddb

From: Dominique Goncalves <dominique.goncalves_at_gmail.com>
Date: Sat, 8 Apr 2006 11:04:12 +0200
Hi,

With FreeBSD 7.0-CURRENT, I can't type anything with my PS/2 keyboard
when I enter in ddb (ctrl+alt+esc) in the prompt 'db>'.

A work around is to boot with 'Boot FreeBSD in safe mode' menu 3.

Regards.

GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #0: Fri Apr  7 20:49:09 CEST 2006
    root_at_djdomics.sceen.net:/usr/obj/share/src/FreeBSD/HEAD/src/sys/FREESBIE
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,PN,MMX,FXSR,SSE>
real memory  = 134205440 (127 MB)
avail memory = 121573376 (115 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
ACPI disabled by blacklist.  Contact your BIOS vendor.
cpu0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 6,0xd800-0xd80f at device 4.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f
irq 10 at de vice 4.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0xe800-0xe80f at device 4.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xd000-0xd01f mem
0xe3800000-0xe3800ff f,0xe1800000-0xe18fffff irq 11 at device 11.0 on
pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:26:49:2f
vgapci0: <VGA-compatible display> mem 0xe2800000-0xe2bfffff at device
12.0 on pc i0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: [FAST]
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FAST]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
Timecounter "TSC" frequency 501138835 Hz quality 800
Timecounters tick every 1.000 msec
ad2: 9641MB <QUANTUM FIREBALLlct15 10 A01.0F00> at ata1-master UDMA33
acd0: CDROM <SAMSUNG CD-ROM SC-152G/C401> at ata1-slave PIO4
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 GEOcd0 at
ata1 bus 0  target 1 lun 0
cd0: <SAMSUNG CD-ROM SC-152G C401> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [81386 x 2048 byte records]
M_LABEL: Label for provider acd0 is iso9660/FreeSBIE.
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 acd0:
FAILURE - READ _BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
(cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 1 3d e9 0 0 1 0
(cd0:ata1:0:1:0): CAM Status: SCSI Status Error
(cd0:ata1:0:1:0): SCSI Status: Check Condition
(cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:1:0): Illegal mode for this track
(cd0:ata1:0:1:0): Unretryable error
(cd0:ata1:0:1:0): cddone: got error 0x6 back
Trying to mount root from cd9660:/dev/iso9660/FreeSBIE
KDB: enter: manual escape to debugger
[thread pid 18 tid 100008 ]
Stopped at      kdb_enter+0x2b: nop
db>


--
There's this old saying: "Give a man a fish, feed him for a day. Teach
a man to fish, feed him for life."
Received on Sat Apr 08 2006 - 07:04:13 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:54 UTC