Re: IBM T60 dmsg 6.1-RC1 (problems will test patches)

From: Sam Leffler <sam_at_errno.com>
Date: Wed, 19 Apr 2006 08:49:37 -0700
Benjamin Adams wrote:
> I don't think the kernel is using dual core corrently. 6.0 and 7.0 did
> not reconize my acpi_bus for my hard drive.
> Also built in Wireless is not detected, Maybe other problems?
> 
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
> reserved.
> FreeBSD 6.1-RC1 #0: Mon Apr 10 17:03:22 UTC 2006
>     root_at_opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Genuine Intel(R) CPU           T2500  _at_ 2.00GHz (1995.02-MHz
> 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
> 
> Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>>
>   AMD Features=0x100000<NX>
>   Hyperthreading: 2 logical CPUs
> real memory  = 535625728 (510 MB)
> avail memory = 514605056 (490 MB)
> ACPI APIC Table: <LENOVO TP-79   >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <LENOVO TP-79> on motherboard
> acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> cpu1: <ACPI CPU> on acpi0
> acpi_throttle1: <ACPI CPU Throttling> on cpu1
> acpi_throttle1: failed to attach P_CNT
> device_attach: acpi_throttle1 attach returned 6
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci0: <multimedia> at device 27.0 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
> 0x3000-0x301f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2
> em0: Ethernet address: 00:16:41:16:28:2a
> pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <network> at device 0.0 (no driver attached)
> pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
> pci12: <ACPI PCI bus> on pcib5
> uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at
> device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at
> device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at
> device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at
> device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <UHCI (generic) USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
> 0xee404000-0xee4043ff irq 19 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci21: <ACPI PCI bus> on pcib6
> cbb0: <TI1510 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at
> device 0.0 on pci21
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH7 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <Intel ICH7 SATA300 controller> port
> 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf
> mem 0xee404400-0xee4047ff irq 16 at device 31.2 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> ata4: <ATA channel 2> on atapci1
> ata5: <ATA channel 3> on atapci1
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> sio0: configured irq 3 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> sio0: configured irq 3 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
> 0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass
> 3/1
> ums0: 3 buttons and Z dir.
> ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
> Timecounters tick every 1.000 msec
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acd0: DVDR <MATSHITADVD-RAM UJ-842/RB01> at ata0-master UDMA33
> ad4: 95396MB <FUJITSU MHV2100BH 00840028> at ata2-master SATA150
> SMP: AP CPU #1 Launched!
> 
> TOP------
> last pid: 36180;  load averages:  0.29,  0.24,  0.16
> up 0+05:20:32  13:18:04
> 102 processes: 1 running, 101 sleeping
> CPU states:  1.3% user,  0.0% nice,  3.4% system,  0.0% interrupt, 95.3%
> idle
> Mem: 324M Active, 52M Inact, 93M Wired, 19M Cache, 60M Buf, 3388K Free
> Swap: 996M Total, 5328K Used, 991M Free
> 
> ifconfig----
> 
>> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>>         options=b<RXCSUM,TXCSUM,VLAN_MTU>
>>         inet6 fe80::216:41ff:fe16:282a%em0 prefixlen 64 scopeid 0x1
>>         inet 192.168.0.7 netmask 0xffffff00 broadcast 192.168.0.255
>>         ether 00:16:41:16:28:2a
>>         media: Ethernet autoselect (100baseTX <full-duplex>)
>>         status: active
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>>         inet6 ::1 prefixlen 128
>>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
>>         inet 127.0.0.1 netmask 0xff000000
> 
> Just looking for some help.  I will test install any patches if someone
> wants to work with me.
> I'm glade to help FreeBSD.
> 

The T60 has an intel 3945 card in it unless you've got a special config. 
  No native driver as yet; you can use ndis to get something going.

	Sam
Received on Wed Apr 19 2006 - 13:49:41 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:55 UTC