System: Nokia IP330 using AMD K6 processor Card: Zynx ZX412 dual 10/100 card and DEC/Intel 21143 chipset ifconfig: dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 172.21.1.1 netmask 0xffff0000 broadcast 172.21.255.255 inet6 fe80::2c0:95ff:fee5:7d8c%dc0 prefixlen 64 scopeid 0x4 ether 00:c0:95:e5:12:ab media: Ethernet autoselect (none) status: no carrier dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 172.21.2.1 netmask 0xffff0000 broadcast 172.21.255.255 inet6 fe80::2c0:95ff:fee5:7d8d%dc1 prefixlen 64 scopeid 0x5 ether 00:c0:95:e5:23:cd media: Ethernet autoselect (none) status: no carrier dmesg: pci1: <PCI bus> on pcib1 dc0: <Intel 21143 10/100BaseTX> port 0xe000-0xe07f mem 0xd8000000-0xd80003ff irq 10 at device 5.0 on pci1 miibus3: <MII bus> on dc0 dcphy0: <Intel 21143 NWAY media interface> on miibus3 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:c0:95:e5:7d:8c dc0: [GIANT-LOCKED] dc1: <Intel 21143 10/100BaseTX> port 0xe400-0xe47f mem 0xd8001000-0xd80013ff irq 12 at device 6.0 on pci1 miibus4: <MII bus> on dc1 dcphy1: <Intel 21143 NWAY media interface> on miibus4 dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: Ethernet address: 00:c0:95:e5:7d:8d dc1: [GIANT-LOCKED] pciconf -vl: pcib1_at_pci0:16:0: class=0x060400 card=0x000000dc chip=0x00241011 rev=0x03 hdr=0x01 vendor = 'Digital Equipment Corporation' device = '21151/2 PCI to PCI Bridge' class = bridge subclass = PCI-PCI dc0_at_pci1:5:0: class=0x020000 card=0x0019110d chip=0x00191011 rev=0x41 hdr=0x00 vendor = 'Digital Equipment Corporation' device = 'DC21142/3 PCI/CardBus 10/100 Mbit Ethernet Ctlr' class = network subclass = ethernet dc1_at_pci1:6:0: class=0x020000 card=0x0019110d chip=0x00191011 rev=0x41 hdr=0x00 vendor = 'Digital Equipment Corporation' device = 'DC21142/3 PCI/CardBus 10/100 Mbit Ethernet Ctlr' class = network subclass = ethernet I have been advised to look at http://cvstrac.pfsense.com/chngview? cn=4643 But, I am not using pfSense. Just 6.0 release. I have also looked at http://www.znyx.com/support/drivers/ ZX412_drivers.htm But these drivers don't work for me. If they can be made to work, could they be built into the next release or adapt the existing drivers? Typically, I would say why bother with such old equipment but there are a lot of companies trying to breath new life into these old firewalls. Park On Apr 19, 2006, at 10:03 AM, Andre Guibert de Bruet wrote: > On Apr 16, 2006, at 1:12 PM, livefreebsd_at_mac.com wrote: > >> Does 6.0 not support hot-swap Compact PCI? >> >> With an ethernet card in this slot, O/S sees dc0 and dc1 but >> power to the actual tranceivers does not occur. >> >> i.e. FreeBSD sees the chipset and let me ifconfig anything. But, >> activity lights never works. This works with Linux. >> >> Can we port the code for this from Linux? > > This report is void of any relevant information and is therefore > useless for a variety of reasons: > > - What is the make of the ethernet card? > - Could we get the appropriate pciconf -vl output? > - What does the dmesg output look like for the card? > - What model laptop is this being used in? > - What CPU? AMD64 or I386? > > Why should we port a driver for a NIC that appears to be almost > working? It is way more efficient to make the relevant changes to > get the card working in the present driver. This of course, > requires that we know what devices you are trying to make > interoperate... > > Cheers, > Andy > > /* Andre Guibert de Bruet * 6f43 6564 7020 656f 2e74 4220 7469 > 6a20 */ > /* Code poet / Sysadmin * 636f 656b 2e79 5320 7379 6461 696d > 2e6e */ > /* GSM: +1 734 846 8758 * 5520 494e 2058 6c73 7565 6874 002e > 0000 */ > /* WWW: siliconlandmark.com * C/C++, Java, Perl, PHP, SQL, XHTML, > XML */ >Received on Wed Apr 19 2006 - 20:14:19 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:55 UTC