Re: panic: mutex Giant not owned at /usr/src/sys/cam/cam_xpt.c:4837

From: Anish Mistry <mistry.7_at_osu.edu>
Date: Wed, 26 Apr 2006 15:54:34 -0400
On Wednesday 26 April 2006 04:35, Robert Watson wrote:
> On Wed, 26 Apr 2006, Anish Mistry wrote:
> > #10 0xc04cc002 in panic (fmt=0xc06284f9 "mutex %s not owned at
> > %s:%d") at /usr/src/sys/kern/kern_shutdown.c:549
> > #11 0xc04c3b43 in _mtx_assert (m=0xc06286ff, what=-1056878592,
> >    file=0xc06181c9 "/usr/src/sys/cam/cam_xpt.c", line=4837)
> >    at /usr/src/sys/kern/kern_mutex.c:768
> > ---Type <return> to continue, or q <return> to quit---
> > #12 0xc0432c65 in xpt_release_devq (path=0x0, count=1,
> > run_queue=1) at /usr/src/sys/cam/cam_xpt.c:4837
> > #13 0xc043420e in xpt_action (start_ccb=0xc22f9530)
> >    at /usr/src/sys/cam/cam_xpt.c:3580
> > #14 0xc051091b in kern_sendit (td=0xc28f7870, s=4, mp=0xcca4bc6c,
> > flags=0,
> >    control=0x0, segflg=3227694719)
> > at /usr/src/sys/kern/uipc_syscalls.c:775
> > #15 0xc0511965 in sendit (td=0xc28f7870, s=4, mp=0xcca4bc6c,
> > flags=0) at /usr/src/sys/kern/uipc_syscalls.c:715
>
> Something really nasty happened to the stack between frame 14 and
> frame 13. The above code path Should Never Happen.  The CAM bit is
> consistent with itself, and with the panic message, and the socket
> bit is consistent with itself.  That leaves a question about what
> happened in between.  Did you try running 'trace' under DDB?  If
> so, can you use dmesg on the core dump to see if the DDB trace
> differs from the gdb trace?
Nope, I didn't do a trace.  So dmesg on the core file didn't show 
anything useful.


>
> Robert N M Watson
>
> > #16 0xc0511c6e in sendto (td=0xc062b67f, uap=0xc1015000)
> >    at /usr/src/sys/kern/uipc_syscalls.c:833
> > #17 0xc05ff737 in syscall (frame=
> >      {tf_fs = 59, tf_es = 59, tf_ds = 59, tf_edi = 672381756,
> > tf_esi = 134536657, tf_ebp = -1077945788, tf_isp = -861618844,
> > tf_ebx = 672417536, tf_edx = 74, tf_ecx = 134541840, tf_eax =
> > 133, tf_trapno = 12, tf_err = 2, tf_eip = 672270187, tf_cs = 51,
> > tf_eflags = 534, tf_esp = -1077945820, tf_ss = 59})
> >    at /usr/src/sys/i386/i386/trap.c:1016
> > #18 0xc05f0b4f in Xint0x80_syscall ()
> > at /usr/src/sys/i386/i386/exception.s:191
> > #19 0x00000033 in ?? ()
> > Previous frame inner to this frame (corrupt stack?)
> >
> > Dmesg:
> > Copyright (c) 1992-2006 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> > 1993, 1994
> >        The Regents of the University of California. All rights
> > reserved.
> > FreeBSD 7.0-CURRENT #0: Wed Apr 19 13:18:18 EDT 2006
> >
> > amistry_at_littleguy.am-productions.biz:/usr/obj/usr/src/sys/LITTLEG
> >UY Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (859.34-MHz
> > 586-class CPU)
> >  Origin = "GenuineTMx86"  Id = 0x543  Stepping = 3
> >  Features=0x80893f<FPU,VME,DE,PSE,TSC,MSR,CX8,SEP,CMOV,MMX>
> > real memory  = 251527168 (239 MB)
> > avail memory = 236593152 (225 MB)
> > Crusoe LongRun support enabled, current mode: 2 <867MHz 1300mV
> > 100%> kbd1 at kbdmux0
> > acpi0: <FUJ PAULING2> on motherboard
> > acpi0: Power Button (fixed)
> > acpi_ec0: <Embedded Controller: GPE 0> port 0x62,0x66 on acpi0
> > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on
> > acpi0 cpu0: <ACPI CPU> on acpi0
> > acpi_throttle0: <ACPI CPU Throttling> on cpu0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pci0: <memory, RAM> at device 0.1 (no driver attached)
> > pci0: <memory, RAM> at device 0.2 (no driver attached)
> > ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
> > 0xfc100000-0xfc100fff irq 11 at device 2.0 on pci0
> > ohci0: [GIANT-LOCKED]
> > usb0: OHCI version 1.0, legacy support
> > usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
> > usb0: USB revision 1.0
> > usbd_get_string: getting lang failed, using 0
> > uhub0: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1>
> > on usb0
> > uhub0: 2 ports with 2 removable, self powered
> > pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem
> > 0xfc101000-0xfc101fff irq 9 at device 4.0 on pci0
> > pcm0: <SigmaTel STAC9756/57 AC97 Codec>
> > pcm0: [GIANT-LOCKED]
> > pci0: <bridge> at device 6.0 (no driver attached)
> > isab0: <PCI-ISA bridge> at device 7.0 on pci0
> > isa0: <ISA bus> on isab0
> > cbb0: <TI1410 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
> > cardbus0: <CardBus bus> on cbb0
> > pccard0: <16-bit PCCard bus> on cbb0
> > atapci0: <AcerLabs M5229 UDMA66 controller> port
> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 15.0
> > on pci0
> > atapci0: using PIO transfers above 137GB as workaround for 48bit
> > DMA access bug, expect reduced performance
> > ata0: <ATA channel 0> on atapci0
> > ata1: <ATA channel 1> on atapci0
> > rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem
> > 0xfc102000-0xfc1020ff irq 9 at device 16.0 on pci0
> > miibus0: <MII bus> on rl0
> > rlphy0: <RealTek internal media interface> on miibus0
> > rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > rl0: Ethernet address: 00:e0:00:ae:45:08
> > fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem
> > 0xfc102800-0xfc102fff,0xfc104000-0xfc107fff irq 9 at device 19.0
> > on pci0
> > fwohci0: OHCI version 1.10 (ROM=0)
> > fwohci0: No. of Isochronous channels is 4.
> > fwohci0: EUI64 00:00:0e:10:00:b0:29:d0
> > fwohci0: Phy 1394a available S400, 1 ports.
> > fwohci0: Link S400, max_rec 2048 bytes.
> > firewire0: <IEEE1394(FireWire) bus> on fwohci0
> > dcons_crom0: <dcons configuration ROM> on firewire0
> > dcons_crom0: bus_addr 0xea34000
> > fwohci0: Initiate bus reset
> > fwohci0: node_id=0x8800ffc0, gen=1, non CYCLEMASTER mode
> > firewire0: 2 nodes, maxhop <= 1, cable IRM = 1
> > vgapci0: <VGA-compatible display> port 0x1800-0x18ff mem
> > 0xfd000000-0xfdffffff,0xfc103000-0xfc103fff irq 9 at device 20.0
> > on pci0
> > acpi_video0: <ACPI video extension> on vgapci0
> > drm0: <Rage Mobility P/M> on vgapci0
> > info: [drm] Initialized mach64 1.0.0 20020904
> > acpi_button0: <Power Button> on acpi0
> > acpi_acad0: <AC Adapter> on acpi0
> > battery0: <ACPI Control Method Battery> on acpi0
> > battery1: <ACPI Control Method Battery> on acpi0
> > acpi_lid0: <Control Method Lid Switch> on acpi0
> > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on
> > acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0
> > psm0: [GIANT-LOCKED]
> > psm0: model Generic PS/2 mouse, device ID 0
> > acpi_fujitsu0: <Fujitsu Function Hotkeys FUJ02B1> on acpi0
> > pmtimer0 on isa0
> > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff
> > pnpid ORM0000 on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
> > on isa0
> > Timecounter "TSC" frequency 859339043 Hz quality 800
> > Timecounters tick every 10.000 msec
> > acpi_acad0: acline initialization start
> > battery0: battery initialization start
> > battery1: battery initialization start
> > acpi_acad0: On Line
> > acpi_acad0: acline initialization done, tried 1 times
> > battery0: battery initialization done, tried 1 times
> > ad0: 19077MB <TOSHIBA MK2018GAP M1.42 A> at ata0-master UDMA66
> > firewire0: bus manager 1
> > acd0: CDRW <TOSHIBA DVD-ROM SD-R2212/1F15> at ata1-master UDMA33
> > firewire0: New S400 device ID:0000d1008051e6dd
> > Trying to mount root from ufs:/dev/ad0s2a
> > WARNING: / was not properly dismounted
> > WARNING: /tmp was not properly dismounted
> > WARNING: /usr was not properly dismounted
> > WARNING: /var was not properly dismounted
> > battery1: battery initialization failed, giving up
> > fuse4bsd: version 0.3.0, FUSE ABI 7.5
> >
> >
> >
> > --
> > Anish Mistry

-- 
Anish Mistry

Received on Wed Apr 26 2006 - 17:54:53 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:55 UTC