Hi, Yeap, I fired up my MS-DOS 6.22 with debug.exe this morning. Its the M8110 SO-DIMM RAID card ROM that does it. And there is no control for that in the BIOS or Adaptec Menu. That motherboard also has a ATA_I6300ESB_R1 RAID 1 card ... on which BTX works but 6.1-RC dont recognize the MetaData. So I'm working around the issue while I wait for Tyan to tell me how to upgrade the M8110 ROM. FYI: I dont see the lidt / ligt opcode in the new version of that ROM. I'll let you guys know. John Baldwin wrote: >On Wednesday 26 April 2006 21:36, Alain Hebert wrote: > > >> Well, >> >>Good and bad news... >> >> 6.1-RC works to install (thanks Soren) >> >> But BTX halt on boot: >> >>----- >>int=0000000d err=00000000 efl=00030002 eip=000010ce >>eax=000c0002 ebx=00000000 ecx=00000005 edx=00000100 >>esi=000000b6 edi=000003f0 ebp=00003778 esp=00003754 >>cs=c800 ds=c800 es=1400 fs=0000 gs=9880 ss=9880 >>cs:eip=2e 0f 01 1e 1d 11 2e 0f-01 16 23 11 0f 20 c0 66 >> 25 ff ff ff 7f 0c 01 0f-22 c0 eb 00 0f 01 e0 a8 >>ss:esp=46 02 09 0e 00 00 00 00-b6 00 80 98 88 36 f0 03 >> b6 00 78 37 72 37 00 00-00 01 05 00 00 00 00 00 >>BTX halted >> >> > >It's in your BIOS (cs=0xc800) > >00000000 2E0F011E1D11 lidt [cs:0x111d]/2 >00000006 2E0F01162311 lgdt [cs:0x1123] >0000000C 0F20C0 mov eax,cr0 >0000000F 6625FFFFFF7F and eax,0x7fffffff >00000015 0C01 or al,0x1 >00000017 0F22C0 mov cr0,eax >0000001A EB00 jmp short 0x1c >0000001C 0F01E0 smsw ax > >Your BIOS is trying to enter protected mode. Try turning off support >for DMA in your BIOS. > > > -- Alain Hebert ahebert_at_pubnix.net PubNIX Inc. P.O. Box 175 Beaconsfield, Quebec H9W 5T7 tel 514-990-5911 http://www.pubnix.net fax 514-990-9443Received on Thu Apr 27 2006 - 16:00:20 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:55 UTC