RE: Current ATA driver problem.

Yes, Thank Darren Pilgrim.

I think 700016 or 700017 support it. ( use 700019 now )

I use currently ad0, ad1, ad7, acd0 (IDE)

update after can't detect ad7, acd0 ( JMI361, JMI361 builtin
motherboard(msi 975X platinum), support one IDE port)

I never use 6.1 , just get ATA driver from 6.1 source tree
(/sys/dev/ata/*) (may same 700016)

Hmm... ATA(HEAD) driver not support 2 pci functions?
so then I just keep use old ATA driver?

pciconf -lv (ata part)
---
atapci1_at_pci0:31:1:      class=0x01018a card=0x72461462 chip=0x27df8086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) Ultra ATA Storage Controller'
    class    = mass storage
    subclass = ATA

atapci0_at_pci3:0:0:       class=0x010185 card=0x31321095 chip=0x2361197b
rev=0x02 hdr=0x00
    class    = mass storage
    subclass = ATA
---

2006/8/10, Søren Schmidt <sos_at_deepcore.dk>:
> Darren Pilgrim wrote:
> > Søren Schmidt wrote:
> >> initial.x wrote:
> >>> My freebsd machine not detect second IDE driver.(recently)
> >>> ( I use intel 975 chipset. )
> >>> Second IDE driver is JMicron JBM361.
> >>>
> >>> Freebsd support second IDE driver ago.
> >>> I can't use second IDE driver now.
> >>>
> >>> Temporary use 6.1-release ata driver in HEAD
> >>> ( this way can use second driver )
> >>>
> >>> ata driver(HEAD) something change?
> >> Yes lots has changed in -currents ATA, backport is planned later.
> >> Just use /sys/sys/ata.h and /sys/dev/ata/* from -current and you'll
> >> be fine until then.
> >
> > I think he was saying that the JBM361 was supported in 6.1, but it's
> > not supported in -current.
> Hmm, seems I got that wrong then, sorry about that..
> The only thing I could think of is that it might be that the chip is
> setup for  2 pci functions which I currently do not support, however
> that shouldn't have worked in 6.1 either...
>
> -Søren
>
>
>