Just got my hands on a HP DL140 G3 (generation 3) server, which has a LSI Logic SAS controller. You can run the live CD or install FreeBSD (6.2-RC1 or 7-CURRENT) onto the HD's, but when you boot from the disks, the boot loader barfs: -=- int=0000000d err=0000001a efl=00030287 eip=0000291d eax=1400000a ebx=00000b3e ecx=00000000 edx=0000c900 esi=00000d1c edi=00000001 ebp=00000206 esp=00000200 cs=c900 ds=9a00 es=9a00 fs=0000 gs=0000 ss=9a00 cs:eip=cc 68 32 06 ff 34 e8 db-fc 83 c4 04 89 46 fe 5f 5e c9 c3 55 8b ec 1e 33-c0 8e d8 a0 75 04 3c 00 ss:esp=1c 0d 02 00 00 00 34 02-d8 45 1c 0d 00 00 00 14 00 00 00 00 01 00 00 00-1c 0d 02 00 00 00 00 00 BTX halted -=- Here is the relevant BIOS output from the controller: -=- LSI Logic Corp. MPT SAS BIOS MPTBIOS-6.06.08.00 (2006.05.16) Copyright 2000-2006 LSI Logic Corp. SLOT ID LUN VENDOR PRODUCT REVISION CAPACITY ---- --- --- -------- ---------------- ---------- ---------- 3 LSILogic SAS1068-IR 1.10.01.00 -=- Has anyone gotten one of these to run FreeBSD from the HD's successfully? Best Wishes - Peter -- Peter_Losher_at_isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:03 UTC