Re: Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers.

From: Andre Guibert de Bruet <andy_at_siliconlandmark.com>
Date: Wed, 13 Dec 2006 04:21:29 -0500 (EST)
On Wed, 13 Dec 2006, Pyun YongHyeon wrote:

> On Wed, Dec 13, 2006 at 02:35:43AM -0500, Andre Guibert de Bruet wrote:
>
> > Sorry for the late reply. This is the output, including your latest
> > round of changes (As committed):
> >
> > dmesg:
> >
> > mskc0: <Marvell Yukon 88E8050 Gigabit Ethernet> port 0xd800-0xd8ff mem
> > 0xfcffc000-0xfcffffff irq 16 at device 0.0 on pci6
> > mskc0: [FAST]
> > msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0
> > msk0: Ethernet address: 00:04:23:b0:d2:cf
> > miibus0: <MII bus> on msk0
> > ukphy0: <Generic IEEE 802.3u media interface> on miibus0
>   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> > 1000baseT-FDX, auto
>
> Hmm, it seems that e1000phy(4) failed to attach your PHY.
> I'd like to know your PHY model/revision number.(You can set
> bootverbose option and ukphy(4) will show OUI/model/revision
> for your PHY.) With ukphy(4) you wouldn't get auto-crossover
> feature or manual media selection work.

I guess it looks better when I enable e1000phy (I was testing a dc-based 
card for a bit and forgot to re-enable it).

mskc0: <Marvell Yukon 88E8050 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfcffc000-0xfcffffff irq 16 at device 0.0 on pci6
mskc0: MSI count : 2
mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfcffc000
mskc0: RAM buffer size : 48KB
mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0
msk0: bpf attached
msk0: Ethernet address: 00:04:23:b0:d2:cf
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto

Do you still need the information for this PHY? boot -v doesn't seem to 
provide this information when e1000phy is attached (It may be a good idea 
print this information out for debugging, anyway).

Andy

/*  Andre Guibert de Bruet  * 6f43 6564 7020 656f 2e74 4220 7469 6a20 */
/*   Code poet / Sysadmin   * 636f 656b 2e79 5320 7379 6461 696d 2e6e */
/*   GSM: +1 734 846 8758   * 5520 494e 2058 6c73 7565 6874 002e 0000 */
/* WWW: siliconlandmark.com *      Tormenting bytes since 1980.       */
Received on Wed Dec 13 2006 - 08:24:40 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:03 UTC