Hi, It looks like MSI was detected, but not used by the msk(4) driver on the Asus Vintage AH-1. This is a uniprocessor Athlon64 system. The PCI bridges on this system aren't in the MSI blacklist, however, there are several odd messages regarding a non-default MSI window. Looking at the code suggests it expects to see the MSI window at 0xfee00000. BTW: This system's on-board SATA controller stopped working with 6.2-RC, so I'm using an add-on PCI-e card for SATA to connect the root disk. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1002, dev=0x5950, revid=0x10 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib0: HT Bridge at 0:1:0 has non-default MSI window 0x0 found-> vendor=0x1002, dev=0x5a3f, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) pcib0: HT Bridge at 0:6:0 has non-default MSI window 0x0 found-> vendor=0x1002, dev=0x5a38, revid=0x00 bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: HT Bridge at 0:7:0 has non-default MSI window 0x0 found-> vendor=0x1002, dev=0x5a39, revid=0x00 bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib0: HT Bridge at 0:25:0 has non-default MSI window 0x0 found-> vendor=0x10b9, dev=0x5249, revid=0x00 bus=0, slot=25, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x6010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=28, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02a8, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 0xfebfc000, size 12, enabled pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=28, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02a8, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=5 map[10]: type 1, range 32, base 0xfebfd000, size 12, enabled pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 18 found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=28, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02a8, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=3 map[10]: type 1, range 32, base 0xfebfe000, size 12, enabled pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 19 found-> vendor=0x10b9, dev=0x5239, revid=0x01 bus=0, slot=28, func=3 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 0xfebffc00, size 8, enabled pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 23 found-> vendor=0x10b9, dev=0x5461, revid=0x00 bus=0, slot=29, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x50 (20000 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 64, base 0xfebf8000, size 14, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 22 found-> vendor=0x10b9, dev=0x1573, revid=0x31 bus=0, slot=30, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x18 (6000 ns) found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=30, func=1 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10b9, dev=0x5229, revid=0xc7 bus=0, slot=31, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0xff00, size 4, enabled pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xfdb00000-0xfe3fffff pcib1: prefetched decode 0xf5a00000-0xfd9fffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5974, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base 0xf8000000, size 26, enabled pcib1: requested memory range 0xf8000000-0xfbffffff: good map[14]: type 4, range 32, base 0xb800, size 8, enabled pcib1: requested I/O range 0xb800-0xb8ff: in range map[18]: type 1, range 32, base 0xfe000000, size 16, enabled pcib1: requested memory range 0xfe000000-0xfe00ffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 17 vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem 0xf8000000-0xfbffffff,0xfe000000-0xfe00ffff irq 17 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xfe400000-0xfe4fffff pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x11ab, dev=0x4362, revid=0x19 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8053 Gigabit Ethernet Controller PN: Yukon 88E8053 EC: Rev. 1.9 MN: Marvell SN: AbCdEfG32a88a CP: id 1, BAR16, off 0x3cc RV: 0x24 MSI supports 2 messages, 64 bit map[10]: type 1, range 64, base 0xfe4fc000, size 14, enabled pcib2: requested memory range 0xfe4fc000-0xfe4fffff: good map[18]: type 4, range 32, base 0xc800, size 8, enabled pcib2: requested I/O range 0xc800-0xc8ff: in range pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe4fc000-0xfe4fffff irq 18 at device 0.0 on pci2 mskc0: MSI count : 2 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe4fc000 mskc0: RAM buffer size : 48KB mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff) mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff) msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:15:f2:32:a8:8a miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49 mskc0: [MPSAFE] mskc0: [FAST] Any ideas? Regards, BMSReceived on Sat Dec 23 2006 - 21:18:38 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:04 UTC