Re: em(4) stops forwarding

Scott Long wrote:
> Michal Mertl wrote:
> > Hello,
> > 
> > I've been running CURRENT for long time and never experienced problem
> > with the built-in em(4) card before. Recently (I first noticed it on Jan
> > 24) the card has stopped working several times. Nothing gets into the
> > log file. Carrier is still detected properly but no data is exchanged.
> > Ifconfig up/down doesn't help but kldunload/load does. When I run
> > tcpdump I don't see any packet coming in but I see some outgoing.
> > 
> > Can someone suggest what to look at when it happens the next time? I
> > have DDB compiled in. I will try to sniff the wire using another machine
> > next time to see if the card sends out anything.
> > 
> > The command 'pciconf -lv' says about the card this:
> > em0_at_pci2:1:0:   class=0x020000 card=0x05491014 chip=0x101e8086 rev=0x03
> > hdr=0x00
> >     vendor   = 'Intel Corporation'
> >     device   = '82540EP Gigabit Ethernet Controller (Mobile)'
> >     class    = network
> >     subclass = ethernet
> > 
> > The dmesg:
> > em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
> > 0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at
> > device 1.0 on pci2
> > em0: Ethernet address: 00:0d:60:cd:ae:e2
> > em0: [FAST]
> > 
> > The interrupt is shared since the machine is a notebook. I don't know if
> > it was just a coincidence but I think that it happened at the same time
> > as my USB mouse stopped working - the USB controller is on the same irq.
> > 
> > Michal
> > 
> 
> What is sharing the interrupt?

vgapci0, ipw0, ehci0, uhci0-2. I don't think vgapci0 and ipw0 are really
using the interrupt when I use em0.

> 
> Scott
> 
>