hi, when I load if_em on TP42P got this panic: #kldload if_em [thread pid 1300 tid 100060 ] Stopped at em_intr_fast+0xb: movl 0x4(%eax),%edx db> db> bt Tracing pid 1300 tid 100060 td 0xc673b340 em_intr_fast(c6b07800) at em_intr_fast+0xb intr_execute_handlers(c096d718,e8d338b8,c673b340,c096d514,c096d718) at intr_execute_handlers+0xe1 atpic_handle_intr(b) at atpic_handle_intr+0x96 Xatpic_intr11() at Xatpic_intr11+0x20 --- interrupt, eip = 0xc0853d23, esp = 0xe8d338f8, ebp = 0xe8d338fc --- spinlock_exit(c096d718,0,c6b07948,e8d3392c,c085067d) at spinlock_exit+0x27 atpic_enable_source(c096d718,c096d718,c096d718) at atpic_enable_source+0x7f intr_add_handler(c64d83c0,b,c6c55418,c6b07800,84) at intr_add_handler+0x59 nexus_setup_intr(c6390780,c6505480,c6afdd00,84,c6c55418,c6b07800,c6b07948) at nexus_setup_intr+0x66 bus_generic_setup_intr(c6484200,c6505480,c6afdd00,84,c6c55418,c6b07800,c6b07948) at bus_generic_setup_intr+0x76 bus_generic_setup_intr(c6484880,c6505480,c6afdd00,84,c6c55418,c6b07800,c6b07948) at bus_generic_setup_intr+0x76 bus_generic_setup_intr(c64d0100,c6505480,c6afdd00,84,c6c55418,c6b07800,c6b07948) at bus_generic_setup_intr+0x76 bus_generic_setup_intr(c64d1000,c6505480,c6afdd00,84,c6c55418,c6b07800,c6b07948) at bus_generic_setup_intr+0x76 bus_generic_setup_intr(c6505800,c6505480,c6afdd00,84,c6c55418,c6b07800,c6b07948)t bus_generic_setup_intr+0x76 bus_setup_intr(c6505480,c6afdd00,84,c6c55418,c6b07800) at bus_setup_intr+0x99 em_attach(c6505480) at em_attach+0x787 device_attach(c6505480,c6505480,c6505480,2,c64f5000) at device_attach+0x58 device_probe_and_attach(c6505480,c6505480,c64f5000) at device_probe_and_attach+0xc4 pci_driver_added(c6505800,c6c63b08) at pci_driver_added+0xd1 devclass_add_driver(c6387e40,c6c63b08,c6aa9700,c6c63ae8,c6863cc0) at devclass_add_driver+0xb7 driver_module_handler(c6aa9700,0,c6c63af4,c0991040,0) at driver_module_handler+0x59 module_register_init(c6c63ae8) at module_register_init+0x4b linker_file_sysinit(c6b94200,c6b94200,1,c6b94200,c6863cc0) at linker_file_sysinit+0x7d linker_load_file(c6863cc0,e8d33c50,400,0,c64e7c00) at linker_load_file+0xce linker_load_module(0,c64e7c00,0,0,e8d33c7c) at linker_load_module+0xa3 kldload(c673b340,e8d33d04,1,1,296) at kldload+0xe7 syscall(3b,3b,3b,0,bfbfed54) at syscall+0x2ee Xint0x80_syscall() at Xint0x80_syscall+0x1f --- syscall (304, FreeBSD ELF32, kldload), eip = 0x280c41cb, esp = 0xbfbfeccc, ebp = 0xbfbfed08 --- #dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #27: Thu Jan 12 23:40:06 CST 2006 root_at_tp.gddsn.org.cn:/usr/obj/usr/src/sys/IBM01 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.80GHz (598.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,C LFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 2146828288 (2047 MB) avail memory = 2095865856 (1998 MB) ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1R> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82855 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0 xc0100000-0xc010ffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff i rq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 cbb0: <PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci 2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci 2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci2: <network, ethernet> at device 1.0 (no driver attached) ath0: <Atheros 5212> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2 ath0: Ethernet address: 00:05:4e:4d:2a:7b ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 6,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x1880-0x189f irq 11 at de vice 31.3 on pci0 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc 0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 8250 or not responding ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ugen0: vendor 0x1668 product 0x2441, rev 1.10/5.46, addr 2 Timecounter "TSC" frequency 598061766 Hz quality 800 Timecounters tick every 1.000 msec ad0: 57231MB <HTS726060M9AT00 MH4OA6GA> at ata0-master UDMA100 cardbus1: CIS pointer is 0! fwohci0: <Texas Instruments TSB43AB23> mem 0xc0240000-0xc02407ff,0xc0244000-0xc0 247fff at device 0.0 on cardbus1 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:30:bd:00:00:00:00 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x7d7b0000 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:00:30:bd:00:00:00:00 _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fwohci0: BUS reset fwohci0: BUS reset fwohci0: node_id=0x8000ffc0, gen=2, non CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 firewire0: bus manager 1 firewire0: New S400 device ID:0001b700000104a8 acd0: DVDR <MATSHITADVD-RAM UJ-812/K104> at ata1-master UDMA33 Trying to mount root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted /tmp: mount pending error: blocks 16 files 4 WARNING: /var was not properly dismounted /var: mount pending error: blocks 140 files 14 WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 4 files 1 WARNING: /home was not properly dismounted fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=3, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) drm0: <ATI Radeon FireGL T2 128> on vgapci0 info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized radeon 1.19.0 20050911 info: [drm] Loading R300 Microcode fwohci0: device physically ejected? dcons_crom0: detached fwip0: detached sbp0: detached firewire0: detached fwohci0: detached ath0: link state changed to UP info: [drm] Loading R300 MicrocodeReceived on Fri Jan 13 2006 - 01:38:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:50 UTC