On Thu, 5 Jan 2006, Andre Guibert de Bruet wrote: =>On Jan 5, 2006, at 4:17 AM, Andrea Brancatelli wrote: => =>> The blades have two Broadcom NICs... the bge drivers fires up with no =>> problem, but none of the bge0/bge1 card seems to actually work. Whathever =>> setting I apply to them I cannot reach anything on the outside, and =>> furthermore the emergency shell on VTY4 allows me a very short set of =>> commands. I have no doubts on the functionality of the hardware for =>> various reason (we tried to install on 3 different server always with the =>> same results; one of the blades was working ok with windows 2003 before). =>> =>> A very suspicious thing is that ifconfig reports for both the cards: =>> "status: no carrier", while the cable is surely pulled in (it's hard =>> wired, it cannot be pulled off at all). =>> =>> So we are stuck again. I downloaded the complete ISO for amd64. I plan on =>> doing the installation from CDRom on Blade 3 (the one that actually =>> succeeds in seeing the CD) and then investigate further on the Broadcom =>> issue. =>> =>> Do anyone has ever stepped on problem with the bge driver? => =>Though not in a blade configuration, I have had a couple of Dell PowerEdge =>servers with the bge driver running for a couple of years flawlessly. I can agree to bge cards working on standard Dell 1U/2U/xU boxes, but they did not work in the first generation Dell blades I tested. So there is definitely some difference even when the chips are reported to be the same. Thanks, Will -- Will Froning Unix Sys. Admin. wfroning_at_angui.shReceived on Fri Jan 13 2006 - 23:34:40 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:50 UTC