Re: Marvell/SysKonnect YukonII source code available

From: Norikatsu Shigemura <nork_at_FreeBSD.org>
Date: Tue, 24 Jan 2006 23:13:53 +0900
On Tue, 24 Jan 2006 11:19:05 +0100
Andre Oppermann <andre_at_freebsd.org> wrote:
> Marvell/SysKonnect made the source code to the YukonII chips available
> today under a BSD license:
>   http://people.freebsd.org/~andre/mykbsd60x86-8.12.1.3-src.tgz
> I haven't tested the driver yet and I don't know if it available directly
> from the their website already.
> Many thanks to Gerald and Frank at SysKonnect for working with us and
> making this possible!

	Good works!!  I confirmed it on 6.0R-p2, but I didn't test.

	# mkdir /usr/src/sys/dev/myk
	# cd /usr/src/sys/dev/myk
	# tar xvf mykbsd60x86-8.12.1.3-src.tgz
	# make clean all
	  :
	# kldload ./if_myk.ko
	# dmesg
	  :
	myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.12.1.3> port 0xa800-0xa8ff mem 0xff720000-0xff723fff irq 17 at device 0.0 on pci4
	myk0: Ethernet address: 00:13:20:b4:85:66
	# ifconfig myk0
	myk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU>
        ether 00:13:20:b4:85:66
        media: Ethernet autoselect
        status: no carrier
Received on Tue Jan 24 2006 - 13:14:02 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:51 UTC