On 6/7/06, Ulrich Spoerlein <uspoerlein_at_gmail.com> wrote: > Hi, > > I investigated a bug/missing feature in the bfe(4) driver, which makes > it not see any LINK DOWN events unless you happen to invoke ifconfig. > > If you are running bfe hardware, *please* test the following (NO > PATCHING OR REBOOTING REQUIRED) > > 1. Plug in ethernet cable > 2. Watch dmesg/syslogd for the LINK UP message > 3. Remove the cable > 4. Do you see a LINK DOWN message? Does it appear after you issue > 'ifconfig'? > > Please run these simple steps and report back to me, if you get the LINK > DOWN message or not and which hardware you are running. For reference, > mine is a BCM4401, card=0x81271028 chip=0x440114e4 rev=0x01. > > If you want to give the patch a try, you are of course encouraged to do > so. > > Ulrich Spoerlein > -- > PGP Key ID: 20FEE9DD Encrypted mail welcome! > Fingerprint: AEC9 AF5E 01AC 4EE1 8F70 6CBD E76E 2227 20FE E9DD > Which is worse: ignorance or apathy? > Don't know. Don't care. > > > Hi Ulrich, It appears that I have the same card as you, but I performed the simple test anyways (kernel recompile will have to wait until my ~5 hour computation finishes). The link up message appears automatically, but the link down message does not appear until I issue an ``ifconfig" command. pciconf -lv: bfe0_at_pci2:0:0: class=0x020000 card=0x81271028 chip=0x440114e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM4401 10/100 Integrated Ethernet Controller' class = network subclass = ethernet I will hopefully give the patch a try in the next couple of days. -Ben KadukReceived on Thu Jun 08 2006 - 19:31:09 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:57 UTC