Eric Anderson wrote: > M. Warner Losh wrote: >> In message: <441ED6F2.3020504_at_centtech.com> >> Eric Anderson <anderson_at_centtech.com> writes: >> : M. Warner Losh wrote: >> : > In message: <441ED31B.6030500_at_centtech.com> >> : > Eric Anderson <anderson_at_centtech.com> writes: >> : > : M. Warner Losh wrote: >> : > : > In message: <441EBC32.2070508_at_centtech.com> >> : > : > Eric Anderson <anderson_at_centtech.com> writes: >> : > : > : Warner Losh wrote: >> : > : > : >> I'm running the latest 6.1-*, and inserting a cf->pccard >> reader with a : > : > : >> 4GB seagate cf drive installed gives me >> these messages: >> : > : > : >> >> : > : > : >> cbb0: ready never happened, status = 0d >> : > : > : >> pcib3: pccard0 requested memory range >> 0xdfb00000-0xdfbfffff: good >> : > : > : >> pccard0: Card has no functions! >> : > : > : >> cbb0: PC Card card activation failed >> : > : > : >> : > : > : > >> : > : > : > Something bad happened on the way to the forum... Please >> set >> : > : > : > hw.cbb.debug=1 and hw.pccard.debug=1 and try again. >> : > : > : > : > : > : : > : > : Here's the latest snippet from >> /var/log/messages with those two set: >> : > : > : : > : > : Mar 20 08:27:47 neutrino kernel: Status is >> 0x30001911 >> : > : > : Mar 20 08:27:47 neutrino kernel: cbb0: card inserted: >> event=0x00000000, : > : > : state=30001911 >> : > : > : Mar 20 08:27:47 neutrino kernel: pccard0: chip_socket_enable >> : > : > : Mar 20 08:27:47 neutrino kernel: cbb_pcic_socket_enable: >> : > : > : Mar 20 08:27:47 neutrino kernel: cbb0: cbb_power: 2V >> : > : > : Mar 20 08:27:47 neutrino kernel: cbb0: ready never >> happened, status = 0d >> : > : > : Mar 20 08:27:47 neutrino kernel: pccard0: read_cis >> : > : > : Mar 20 08:27:47 neutrino kernel: pcib3: pccard0 requested >> memory range : > : > : 0xdfb00000-0xdfbfffff: good >> : > : > : Mar 20 08:27:47 neutrino kernel: pccard0: check_cis_quirks >> : > : > : Mar 20 08:27:47 neutrino kernel: pccard0: Card has no >> functions! >> : > : > : Mar 20 08:27:47 neutrino kernel: cbb0: PC Card card >> activation failed >> : > : > : : > : > : : > : > : Anything else I can provide? >> : > : > : : > : > : Also - when inserting this card in the slot, my >> system freezes for about : > : > : 5-6 seconds. >> : > : > >> : > : > hw.pccard.cis_debug=1 may help. >> : > : > >> : > : > The 2V cbb power looks very wrong, however... >> : > : > >> : > : > Warner >> : > : > : > : : > : Here's what I get with that enabled: >> : > : : > : Mar 20 10:06:16 neutrino kernel: Status is 0x30001911 >> : > : Mar 20 10:06:16 neutrino kernel: cbb0: card inserted: >> event=0x00000000, : > : state=30001911 >> : > : Mar 20 10:06:16 neutrino kernel: pccard0: chip_socket_enable >> : > : Mar 20 10:06:16 neutrino kernel: cbb_pcic_socket_enable: >> : > : Mar 20 10:06:16 neutrino kernel: cbb0: cbb_power: 2V >> : > : Mar 20 10:06:16 neutrino kernel: cbb0: ready never happened, >> status = 0d >> : > : Mar 20 10:06:16 neutrino kernel: pccard0: read_cis >> : > : Mar 20 10:06:16 neutrino kernel: pcib3: pccard0 requested >> memory range : > : 0xdfb00000-0xdfbfffff: good >> : > : Mar 20 10:06:16 neutrino kernel: cis mem map 0xe7642000 >> (resource: : > : 0xdfb10000) >> : > : Mar 20 10:06:16 neutrino kernel: pccard0: CIS tuple chain: >> : > : Mar 20 10:06:16 neutrino kernel: CISTPL_END >> : > : Mar 20 10:06:16 neutrino kernel: ff >> : > : Mar 20 10:06:16 neutrino kernel: cis mem map e7642000 >> : > : Mar 20 10:06:16 neutrino kernel: CISTPL_LINKTARGET expected, >> code ff : > : observed >> : > : Mar 20 10:06:16 neutrino kernel: pccard0: check_cis_quirks >> : > : Mar 20 10:06:16 neutrino kernel: pccard0: Card has no functions! >> : > : Mar 20 10:06:16 neutrino kernel: cbb0: PC Card card activation >> failed >> : > : : > : : > : Thanks for the quick reply! >> : > >> : > Based on what you've provided, here's my current theory of the >> crime: >> : > >> : > (1) The card is inserted. >> : > (2) The bridge somehow thinks it is a X.X V card. It reports >> this as >> : > 2V in the dmesg because I arbitarily assigned numbers to X >> and Y. >> : > (3) There's two ways this can happen. One: is that new cards >> have been >> : > released that implement this standard and your bridge is >> detecting >> : > it, but either the card or bridge fails to implement it >> : > correctly. Two: There is a problem with the bridge's memory >> : > allocation, so the cbb driver is really talking to something >> : > else. Three: the bridge has a bug in detecting X.X V cards and >> : > they should be ignored. >> : > >> : > I'm guessing 'Three' is most likely. How's your hacking skills? >> : > : : :) well, I'm really good at breaking things. Point in the >> direction, : and I'll start looking. >> Try apply the following (you'll have to do it by hand). This turns >> off the XV and YV bits always. This code is src/sys/dev/pccbb/pccbb.c >> >> Warner >> >> static int >> cbb_do_power(device_t brdev) >> { >> struct cbb_softc *sc = device_get_softc(brdev); >> uint32_t voltage, curpwr; >> uint32_t status; >> >> /* Don't enable OE (output enable) until power stable */ >> exca_clrb(&sc->exca[0], EXCA_PWRCTL, EXCA_PWRCTL_OE); >> >> - voltage = cbb_detect_voltage(brdev); >> + voltage = cbb_detect_voltage(brdev) & ~(CARD_XV_CARD | >> CARD_YV_CARD); >> curpwr = cbb_current_voltage(brdev); >> status = cbb_get(sc, CBB_SOCKET_STATE); >> if ((status & CBB_STATE_POWER_CYCLE) && (voltage & curpwr)) >> return 0; >> /* Prefer lowest voltage supported */ >> cbb_power(brdev, CARD_OFF); >> if (voltage & CARD_YV_CARD) >> cbb_power(brdev, CARD_VCC(YV)); >> else if (voltage & CARD_XV_CARD) >> cbb_power(brdev, CARD_VCC(XV)); >> else if (voltage & CARD_3V_CARD) >> cbb_power(brdev, CARD_VCC(3)); >> else if (voltage & CARD_5V_CARD) >> cbb_power(brdev, CARD_VCC(5)); >> else { >> device_printf(brdev, "Unknown card voltage\n"); >> return (ENXIO); >> } >> return (0); >> } >> > > Yep - that makes it find it: > > Mar 20 15:43:22 neutrino kernel: pcib3: pccard0 requested memory range > 0xdfb00000-0xdfbfffff: good > Mar 20 15:43:22 neutrino kernel: pccard0: CIS version PCCARD 2.0 or 2.1 > Mar 20 15:43:22 neutrino kernel: pccard0: CIS info: SEAGATE, ST1 > Mar 20 15:43:22 neutrino kernel: pccard0: Manufacturer code 0x111, > product 0x0 > Mar 20 15:43:22 neutrino kernel: pccard0: function 0: fixed disk, ccr > addr 200 mask f > Mar 20 15:43:22 neutrino kernel: pccard0: function 0, config table > entry 0: memory card; irq mask 0; mwait_required rdybsy_active powerdown > Mar 20 15:43:22 neutrino kernel: pccard0: function 0, config table > entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active > io8 io16 irqshare irqpulse irqlevel powerdown > Mar 20 15:43:22 neutrino kernel: pccard0: function 0, config table > entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; > rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown > Mar 20 15:43:22 neutrino kernel: pccard0: function 0, config table > entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; > rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown > Mar 20 15:43:22 neutrino kernel: pcib3: pccard0 requested memory range > 0xdfb00000-0xdfbfffff: good > Mar 20 15:43:22 neutrino kernel: ata2: <SEAGATE ST1> at port > 0x100-0x10f irq 19 function 0 config 1 on pccard0 > Mar 20 15:43:22 neutrino kernel: ata2: reset tp1 mask=01 ostat0=50 > ostat1=00 > Mar 20 15:43:22 neutrino kernel: ata2: stat0=0x50 err=0x01 lsb=0x00 > msb=0x00 > Mar 20 15:43:22 neutrino kernel: ata2: reset tp2 stat0=50 stat1=00 > devices=0x1<ATA_MASTER> > Mar 20 15:43:22 neutrino kernel: ata2: [MPSAFE] > Mar 20 15:43:22 neutrino kernel: ata0-master: pio=PIO4 > wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire > Mar 20 15:43:23 neutrino kernel: ata2: reiniting channel .. > Mar 20 15:43:23 neutrino kernel: ata2: reset tp1 mask=01 ostat0=d0 > ostat1=00 > Mar 20 15:43:23 neutrino kernel: ata2: stat0=0x50 err=0x01 lsb=0x00 > msb=0x00 > Mar 20 15:43:23 neutrino kernel: ata2: reset tp2 stat0=50 stat1=00 > devices=0x1<ATA_MASTER> > Mar 20 15:43:23 neutrino kernel: ata2: reinit done .. > Mar 20 15:43:23 neutrino kernel: ad4: FAILURE - SETFEATURES ENABLE > RCACHE timed out > Mar 20 15:43:23 neutrino kernel: ad4: 3906MB <Seagate ST64022CF 3.01> > at ata2-master PIO4 > Mar 20 15:43:23 neutrino kernel: ad4: 7999488 sectors [7936C/16H/63S] > 1 sectors/interrupt 1 depth queue > Mar 20 15:43:23 neutrino kernel: GEOM: new disk ad4 > > With all the debugging turned on: > > Mar 20 15:46:44 neutrino kernel: Status is 0x30001911 > Mar 20 15:46:44 neutrino kernel: cbb0: card inserted: > event=0x00000000, state=30001911 > Mar 20 15:46:44 neutrino kernel: pccard0: chip_socket_enable > Mar 20 15:46:44 neutrino kernel: cbb_pcic_socket_enable: > Mar 20 15:46:44 neutrino kernel: cbb0: cbb_power: 3V > Mar 20 15:46:44 neutrino kernel: pccard0: read_cis > Mar 20 15:46:44 neutrino kernel: pcib3: pccard0 requested memory range > 0xdfb00000-0xdfbfffff: good > Mar 20 15:46:44 neutrino kernel: cis mem map 0xe755a000 (resource: > 0xdfb10000) > Mar 20 15:46:44 neutrino kernel: pccard0: CIS tuple chain: > Mar 20 15:46:44 neutrino kernel: CISTPL_DEVICE type=funcspec speed=ext > Mar 20 15:46:44 neutrino kernel: 01 04 df 12 01 ff > Mar 20 15:46:44 neutrino kernel: unhandled CISTPL 1c > Mar 20 15:46:44 neutrino kernel: 1c 05 03 df 12 01 ff > Mar 20 15:46:44 neutrino kernel: unhandled CISTPL 18 > Mar 20 15:46:44 neutrino kernel: 18 02 df 01 > Mar 20 15:46:44 neutrino kernel: CISTPL_MANFID > Mar 20 15:46:44 neutrino kernel: 20 04 11 01 00 00 > Mar 20 15:46:44 neutrino kernel: CISTPL_VERS_1 > Mar 20 15:46:44 neutrino kernel: 15 0f 04 01 53 45 41 47 41 54 45 00 > 53 54 31 00 > Mar 20 15:46:44 neutrino kernel: ff > Mar 20 15:46:44 neutrino kernel: CISTPL_FUNCID > Mar 20 15:46:44 neutrino kernel: 21 02 04 01 > Mar 20 15:46:44 neutrino kernel: CISTPL_FUNCE > Mar 20 15:46:44 neutrino kernel: 22 02 01 01 > Mar 20 15:46:44 neutrino kernel: CISTPL_FUNCE > Mar 20 15:46:44 neutrino kernel: 22 03 02 08 0f > Mar 20 15:46:44 neutrino kernel: CISTPL_CONFIG > Mar 20 15:46:44 neutrino kernel: 1a 05 01 07 00 02 0f > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 0c c0 c0 a1 27 55 4d 5d b6 1e 08 > 00 20 > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 07 00 01 21 b5 1e b6 1e > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 0e c1 41 99 27 55 4d 5d b6 1e 64 > f0 ff ff 20 > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 07 01 01 21 b5 1e b6 1e > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 13 c2 41 99 27 55 4d 5d b6 1e ea > 61 f0 01 07 > Mar 20 15:46:44 neutrino kernel: f6 03 01 ee 20 > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 07 02 01 21 b5 1e b6 1e > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 13 c3 41 99 27 55 4d 5d b6 1e ea > 61 70 01 07 > Mar 20 15:46:44 neutrino kernel: 76 03 01 ee 20 > Mar 20 15:46:44 neutrino kernel: CISTPL_CFTABLE_ENTRY > Mar 20 15:46:44 neutrino kernel: 1b 07 03 01 21 b5 1e b6 1e > Mar 20 15:46:44 neutrino kernel: unhandled CISTPL 14 > Mar 20 15:46:44 neutrino kernel: CISTPL_NO_LINK > Mar 20 15:46:44 neutrino kernel: 14 00 > Mar 20 15:46:44 neutrino kernel: CISTPL_END > Mar 20 15:46:44 neutrino kernel: ff > Mar 20 15:46:44 neutrino kernel: pccard0: check_cis_quirks > Mar 20 15:46:44 neutrino kernel: pccard0: CIS version PCCARD 2.0 or 2.1 > Mar 20 15:46:44 neutrino kernel: pccard0: CIS info: SEAGATE, ST1 > Mar 20 15:46:44 neutrino kernel: pccard0: Manufacturer code 0x111, > product 0x0 > Mar 20 15:46:44 neutrino kernel: pccard0: function 0: fixed disk, ccr > addr 200 mask f > Mar 20 15:46:44 neutrino kernel: pccard0: function 0, config table > entry 0: memory card; irq mask 0; mwait_required rdybsy_active powerdown > Mar 20 15:46:44 neutrino kernel: pccard0: function 0, config table > entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active > io8 io16 irqshare irqpulse irqlevel powerdown > Mar 20 15:46:44 neutrino kernel: pccard0: function 0, config table > entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; > rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown > Mar 20 15:46:44 neutrino kernel: pccard0: function 0, config table > entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; > rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown > Mar 20 15:46:44 neutrino kernel: pccard0: functions scanning > Mar 20 15:46:44 neutrino kernel: pccard0: Card has 1 functions. > pccard_mfc is 0 > Mar 20 15:46:44 neutrino kernel: pccard0: I/O rid 0 start 0 end ffffffff > Mar 20 15:46:44 neutrino kernel: cbb_pcic_socket_enable: > Mar 20 15:46:44 neutrino kernel: cbb0: cbb_power: 0V > Mar 20 15:46:44 neutrino kernel: cbb0: cbb_power: 3V > Mar 20 15:46:44 neutrino kernel: pcib3: pccard0 requested memory range > 0xdfb00000-0xdfbfffff: good > Mar 20 15:46:44 neutrino kernel: pccard0: ccr_res == > dfb01000-dfb013ff, base=200 > Mar 20 15:46:44 neutrino kernel: pccard0: function 0 CCR at 0 offset > 200: 41 80 2e 0, 0 0 0 0, 0 > Mar 20 15:46:44 neutrino kernel: ata2: <SEAGATE ST1> at port > 0x100-0x10f irq 19 function 0 config 1 on pccard0 > Mar 20 15:46:44 neutrino kernel: ata2: reset tp1 mask=01 ostat0=50 > ostat1=00 > Mar 20 15:46:44 neutrino kernel: ata2: stat0=0x50 err=0x01 lsb=0x00 > msb=0x00 > Mar 20 15:46:44 neutrino kernel: ata2: reset tp2 stat0=50 stat1=00 > devices=0x1<ATA_MASTER> > Mar 20 15:46:44 neutrino kernel: ata2: [MPSAFE] > Mar 20 15:46:44 neutrino kernel: ata0-master: pio=PIO4 > wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire > Mar 20 15:46:46 neutrino kernel: ata2: reiniting channel .. > Mar 20 15:46:46 neutrino kernel: ata2: reset tp1 mask=01 ostat0=d0 > ostat1=00 > Mar 20 15:46:46 neutrino kernel: ata2: stat0=0x50 err=0x01 lsb=0x00 > msb=0x00 > Mar 20 15:46:46 neutrino kernel: ata2: reset tp2 stat0=50 stat1=00 > devices=0x1<ATA_MASTER> > Mar 20 15:46:46 neutrino kernel: ata2: reinit done .. > Mar 20 15:46:46 neutrino kernel: ad4: FAILURE - SETFEATURES ENABLE > RCACHE timed out > Mar 20 15:46:46 neutrino kernel: ad4: 3906MB <Seagate ST64022CF 3.01> > at ata2-master PIO4 > Mar 20 15:46:46 neutrino kernel: ad4: 7999488 sectors [7936C/16H/63S] > 1 sectors/interrupt 1 depth queue > Mar 20 15:46:46 neutrino kernel: GEOM: new disk ad4 > Mar 20 15:46:46 neutrino kernel: ad4: Adaptec check1 failed > Mar 20 15:46:46 neutrino kernel: ad4: LSI (v3) check1 failed > Mar 20 15:46:46 neutrino kernel: ad4: LSI (v2) check1 failed > Mar 20 15:46:46 neutrino kernel: ad4: FreeBSD check1 failed > Mar 20 15:46:46 neutrino kernel: pccard0: function 0 CCR at 0 offset > 200 mask f: 41 82 2e 0, 4a 4a 4a 4a, 4a > > > Anything else you would like me to do? Is this a 'fix' or a workaround? If it's a fix, do you think it'll get included and trickled down to 6.1 in time? Thanks! Eric -- ------------------------------------------------------------------------ Eric Anderson Sr. Systems Administrator Centaur Technology Anything that works is better than anything that doesn't. ------------------------------------------------------------------------Received on Thu Mar 23 2006 - 18:54:20 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:54 UTC