Re: Call for testing: emu10kx driver for Creative sound cards

From: sekes <gexlie_at_gmail.com>
Date: Sat, 20 May 2006 21:22:14 +0400
On 5/20/06, Yuriy Tsibizov <Yuriy.Tsibizov_at_gfk.ru> wrote:
>
>
> On Sat, 20 May 2006, sekes wrote:
>
> > i have this soundcard:
> > EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL - CT4780
> >
> > i can test your driver, but it is not supported as i see :(
> > may i hope of supporting dell oem cards by your driver in a future?
>
> Can you try? I think it can work with emu10kx, there was some positive
> reports on -multimedia mailing list.
>
> Yuriy.
>
>

yes it does. thanks. everything works fine except a liitle lack: rears not
producing any sound :)

that's a dmesg:
emu10kx0: <Creative SBLive! 5.1 Digital [SB0220]> port 0xdf80-0xdf9f irq 21
at device 13.0 on pci2
pcm0: <EMU10Kx DSP FRONT PCM Interface> on emu10kx0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
pcm1: <EMU10Kx DSP REAR PCM Interface> on emu10kx0
pcm2: <EMU10Kx DSP CENTER PCM Interface> on emu10kx0
pcm3: <EMU10Kx DSP SUBWOOFER PCM Interface> on emu10kx0
pci2: <input device> at device 13.1 (no driver attached)

pciconv -lv:

emu10kx0_at_pci2:13:0:     class=0x040100 card=0x80651102 chip=0x00021102
rev=0x0a hdr=0x00
    vendor   = 'Creative Labs'
    device   = 'EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from
DELL - CT4780'
    class    = multimedia
    subclass = audio

kldstat
Id Refs Address    Size     Name
 1   36 0xc0400000 537f64   kernel
 2    2 0xc0938000 1ad9c    linux.ko
 3    2 0xc0953000 2cc34    pf.ko
 4    1 0xc0980000 42b170   nvidia.ko
 5    1 0xc0dac000 1bac     pflog.ko
 6    1 0xc0dae000 81d8     dummynet.ko
 7    3 0xc0db7000 c80c     ipfw.ko
 8    1 0xc0dc4000 4a68     atapicam.ko
 9    1 0xc0dc9000 101a8    snd_emu10kx.ko
10    2 0xc0dda000 22ae8    sound.ko
11    1 0xc0dfd000 58554    acpi.ko
12    1 0xc3a4d000 2000     msdosfs_iconv.ko
13    1 0xc3a4f000 3000     libiconv.ko
14    1 0xc3b10000 4000     ipdivert.ko
15    1 0xc3bd2000 4000     ng_socket.ko
16   10 0xc3bd8000 a000     netgraph.ko
17    1 0xc3bed000 3000     ng_iface.ko
18    1 0xc3bf0000 5000     ng_ppp.ko
19    1 0xc3bf5000 4000     ng_bpf.ko
20    1 0xc3c47000 4000     ng_vjc.ko
21    1 0xc3c84000 4000     ng_pptpgre.ko
22    1 0xc3c88000 4000     ng_ksocket.ko
23    1 0xc3d7f000 3000     ng_mppc.ko
24    1 0xc3d82000 2000     rc4.ko
25    1 0xc3d9f000 3000     ng_ether.ko
26    1 0xc3da2000 5000     ng_pppoe.ko

%cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <EMU10Kx DSP FRONT PCM Interface> on emu10kx0 (4p/1r/0v channels
duplex default)
pcm1: <EMU10Kx DSP REAR PCM Interface> on emu10kx0 (1p/0r/0v channels)
pcm2: <EMU10Kx DSP CENTER PCM Interface> on emu10kx0 (1p/0r/0v channels)
pcm3: <EMU10Kx DSP SUBWOOFER PCM Interface> on emu10kx0 (1p/0r/0v channels)

sudo cat /dev/emu10kx0
FreeBSD EMU10Kx Audio Driver

Hardware resource usage:
DSP General Purpose Registers: 38 used, 256 total
DSP Instruction Registers: 54 used, 512 total
Card supports AC97 codec and 5.1 output, SBLive! DSP code

Installed devices:
EMU10Kx DSP FRONT PCM Interface on pcm0
EMU10Kx DSP REAR PCM Interface on pcm1
EMU10Kx DSP CENTER PCM Interface on pcm2
EMU10Kx DSP SUBWOOFER PCM Interface on pcm3
EMU10Kx MIDI Interface
        On-card connector on midi0
        IR reciever MIDI events disabled

%mixer
Mixer vol      is currently set to 100:100
Mixer pcm      is currently set to 100:100
Mixer speaker  is currently set to   0:0
Mixer line     is currently set to  32:32
Mixer mic      is currently set to   0:0
Mixer cd       is currently set to  75:75
Mixer rec      is currently set to   0:0
Mixer igain    is currently set to  75:75
Mixer ogain    is currently set to  50:50
Mixer line1    is currently set to  32:32
Mixer phin     is currently set to   0:0
Mixer phout    is currently set to   0:0
Mixer video    is currently set to  75:75
Recording source: vol
Received on Sat May 20 2006 - 15:22:15 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:56 UTC