JoaoBR wrote: > On Wednesday 31 May 2006 12:06, Dan Nelson wrote: > >>In the last episode (May 30), Rod Person said: >> >>>I have and LSI u320 SCSI controller on a TYAN Thunder K8WE board with >>>and nvidia4 chipset. My boot message displays the following >>> >>>da0 at mpt0 bus 0 target 0 lun 0 >>>da0 <FUJITSU MAP3735NP 5605> FIXED Direct Access SCSI-3 device >>>da0 3.300MB/s tranfers, Tagged Queueing Enabled >>> >>>Why is my transfer rate so low? Anyone have an idea how I can correct >>>this? >> >>That may just be a display bug. Does "diskinfo -t da0" report >>reasonable speeds? If not, check your bios to see if you are forcing a >>slow speed, or try running "camcontrol negotiate da0 -R 160" to force >>320MB speeds (160 Mhz * 16 bit bus = 320MB). > > > > on releng_6 this is the same problem with atapicam > > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <HL-DT-ST CD-RW GCE-8527B 1.02> Removable CD-ROM SCSI-0 device > cd0: 3.300MB/s transfers > > > but seems to work as usual > > Joćo > > Different bug. ScottReceived on Wed May 31 2006 - 14:16:01 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:56 UTC