With my current mainboard, I have been getting some strange issues when using umass. The mainboard is Tyan K8WE (2895) with two northbridges, dmesg and pciconf/usbdevs is below. (nForce 4) Normally, no matter what the device, (CompactFlash, MP3 Player, External HDD) when I plug it in I get this: ## BEGIN MESSAGES ## uhub1: port 3, set config at addr 126 failed, error=USBD_TIMEOUT uhub_explore: usb_new_device failed, error=USBD_TIMEOUT uhub1: device problem (USBD_TIMEOUT), disabling port 3 ## END MESSAGES ## If I continue to unplug and replug it a few times it finally proceeds to work. However, with the Western Digital WD 2500/032 external USB hard drive, after getting a couple of the above messages (after plugging and unplugging as usual) I get the following: (With umass debug sysctl set to -1) ## BEGIN MESSAGES ## umass1: <Western Digital product 0x0901, class 0/0, rev 2.00/2.06, addr 126> umass1: SCSI over Bulk-Only; quirks = 0x0000 umass1: Get Max Lun not supported (USBD_TIMEOUT) umass1:umass_cam_action: 6:-1:-1:XPT_PATH_INQ:. umass1:6:1:-1: Attached to scbus6 umass1:umass_cam_rescan: scbus6: scanning for 6:1:-1 umass1:umass_cam_action: 6:-1:-1:XPT_PATH_INQ:. umass1:umass_cam_action: 6:0:0:XPT_PATH_INQ:. umass1:umass_cam_action: 6:0:0:XPT_PATH_INQ:. umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x12, flags: 0x40, 6b cmd/36b data/18b sense umass1:umass_bbb_dump_cbw: CBW 1: cmd = 6b (0x120000002400), data = 36b, lun = 0, dir = in umass1:umass_attach: Attach finished umass1:umass_transfer_start: transfer index = 4 umass1:umass_t_bbb_data_read_callback: max_bulk=131072, data_rem=36 umass1:umass_t_bbb_data_read_callback: max_bulk=131072, data_rem=0 umass1:umass_transfer_start: transfer index = 8 umass1:umass_bbb_dump_csw: CSW 1: sig = 0x53425355 (valid), tag = 1, res = 0, status = 0x00 (good) umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x12, flags: 0x40, 6b cmd/74b data/18b sense umass1:umass_bbb_dump_cbw: CBW 2: cmd = 6b (0x120000004a00), data = 74b, lun = 0, dir = in umass1:umass_transfer_start: transfer index = 4 umass1:umass_t_bbb_data_read_callback: max_bulk=131072, data_rem=74 umass1:umass_t_bbb_data_read_callback: max_bulk=131072, data_rem=0 umass1:umass_transfer_start: transfer index = 8 umass1:umass_bbb_dump_csw: CSW 2: sig = 0x53425355 (valid), tag = 2, res = 0, status = 0x00 (good) umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x12, flags: 0x40, 6b cmd/255b data/18b sense umass1:umass_bbb_dump_cbw: CBW 3: cmd = 6b (0x12018000ff00), data = 255b, lun = 0, dir = in umass1:umass_transfer_start: transfer index = 4 umass1:umass_t_bbb_data_read_callback: max_bulk=131072, data_rem=255 umass1:umass_t_bbb_data_read_callback: max_bulk=131072, data_rem=0 umass1:umass_transfer_start: transfer index = 8 umass1:umass_t_bbb_status_callback: Failed to read CSW: USBD_TIMEOUT, try 0 umass1:umass_transfer_start: transfer index = 5 umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x12, flags: 0x40, 6b cmd/255b data/18b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_GET_TRAN_SETTINGS:. umass1:umass_cam_action: 6:0:0:XPT_PATH_INQ:. umass1:umass_cam_action: 6:0:0:XPT_GET_TRAN_SETTINGS:. umass1:umass_cam_action: 6:0:0:XPT_SET_TRAN_SETTINGS:. umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x00, flags: 0xc0, 6b cmd/0b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_PATH_INQ:. umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umassX:umass_cam_rescan_callback: xpt0: Rescan succeeded umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 (da6:umass-sim1:1:0:0): got CAM status 0x4 (da6:umass-sim1:1:0:0): fatal error, failed to attach to device (da6:umass-sim1:1:0:0): lost device umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! umass1:umass_cam_action: 6:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1:umass_transfer_start: transfer index = 0 umass1:umass_t_bbb_reset1_callback: BBB reset! (da6:umass-sim1:1:0:0): removing device entry Opened disk da6 -> 5 umass1:umass_tr_error: transfer error, USBD_TIMEOUT -> reset umass1: timeout: giving up reset! ## END MESSAGES ## I've also tried using the alternative "new" USB stack patchset floating around out there, with pretty much the exact same results. Here is the usual debug spam: ## BEGIN DMESG.BOOT ## Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE-p10 #1: Mon Oct 2 07:08:44 CEST 2006 Neovanglist_at_Melchior.neovanglist.net:/usr/obj/usr/src/sys/Melchior Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 246 (2009.27-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 2683830272 (2559 MB) avail memory = 2618638336 (2497 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard ioapic3 <Version 1.1> irqs 32-55 on motherboard acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xa0000000-0xa0000fff irq 20 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xa0001000-0xa00010ff irq 21 at device 2.1 on pci0 usb1: EHCI version 1.0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nve0: <NVIDIA nForce MCP8 Networking Adapter> port 0x1410-0x1417 mem 0xa0002000-0xa0002fff irq 22 at device 10.0 on pci0 nve0: Ethernet address 00:e0:81:57:25:6a miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:e0:81:57:25:6a pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) pci2: <display> at device 0.1 (no driver attached) pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci8: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8 pci9: <ACPI PCI bus> on pcib4 pcm0: <Creative Audigy 2 (EMU10K2)> port 0x3000-0x303f irq 24 at device 4.0 on pci9 pcm0: <SigmaTel STAC9721/23 AC97 Codec> fwohci0: <1394 Open Host Controller Interface> mem 0xc0104000-0xc01047ff,0xc0100000-0xc0103fff irq 25 at device 4.2 on pci9 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3c:00:91:00:c9:cb fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3c:00:c9:cb fwe0: Ethernet address: 02:02:3c:00:c9:cb fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci8: <base peripheral, interrupt controller> at device 10.1 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8 pci10: <ACPI PCI bus> on pcib5 ahd0: <Adaptec 29320 Ultra320 SCSI adapter> port 0x4400-0x44ff,0x4000-0x40ff mem 0xc0200000-0xc0201fff irq 29 at device 9.0 on pci10 ahd0: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs ahd1: <Adaptec 29320 Ultra320 SCSI adapter> port 0x4c00-0x4cff,0x4800-0x48ff mem 0xc0202000-0xc0203fff irq 30 at device 9.1 on pci10 ahd1: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs pci8: <base peripheral, interrupt controller> at device 11.1 (no driver attached) pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib6: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_BAD_DATA pci128: <ACPI PCI bus> on pcib6 pci128: <memory> at device 0.0 (no driver attached) pci128: <memory> at device 1.0 (no driver attached) pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128 pci129: <ACPI PCI bus> on pcib7 nvidia0: <GeForce 7900 GT> port 0x5000-0x507f mem 0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq 48 at device 0.0 on pci129 nvidia0: [GIANT-LOCKED] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounters tick every 1.000 msec usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 127 uhub0: 10 ports with 10 removable, self powered usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 127 uhub1: 10 ports with 10 removable, self powered Waiting 5 seconds for SCSI devices to settle ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/22.00, addr 126> ums0: 8 buttons and [XYZ] coordinates umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 125> umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:5:0:-1: Attached to scbus5 da0 at ahd1 bus 0 target 0 lun 0 da0: <SEAGATE ST336607LW 0007> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da1 at ahd1 bus 0 target 4 lun 0 da1: <SEAGATE ST373307LW DS09> Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C) SMP: AP CPU #1 Launched! da2 at umass-sim0 bus 0 target 0 lun 0 da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device da2: 1.000MB/s transfers da2: 488MB (1000944 512 byte sectors: 64H 32S/T 488C) da3 at umass-sim0 bus 0 target 0 lun 1 da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device da3: 1.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present da4 at umass-sim0 bus 0 target 0 lun 2 da4: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device da4: 1.000MB/s transfers da4: Attempt to query device size failed: NOT READY, Medium not present da5 at umass-sim0 bus 0 target 0 lun 3 da5: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device da5: 1.000MB/s transfers da5: Attempt to query device size failed: NOT READY, Medium not present (da3:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da3:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da3:umass-sim0:0:0:1): SCSI Status: Check Condition (da3:umass-sim0:0:0:1): NOT READY asc:3a,0 (da3:umass-sim0:0:0:1): Medium not present (da3:umass-sim0:0:0:1): Unretryable error Opened disk da3 -> 6 (da3:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da3:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da3:umass-sim0:0:0:1): SCSI Status: Check Condition (da3:umass-sim0:0:0:1): NOT READY asc:3a,0 (da3:umass-sim0:0:0:1): Medium not present (da3:umass-sim0:0:0:1): Unretryable error Opened disk da3 -> 6 (da3:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da3:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da3:umass-sim0:0:0:1): SCSI Status: Check Condition (da3:umass-sim0:0:0:1): NOT READY asc:3a,0 (da3:umass-sim0:0:0:1): Medium not present (da3:umass-sim0:0:0:1): Unretryable error Opened disk da3 -> 6 (da4:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 (da4:umass-sim0:0:0:2): CAM Status: SCSI Status Error (da4:umass-sim0:0:0:2): SCSI Status: Check Condition (da4:umass-sim0:0:0:2): NOT READY asc:3a,0 (da4:umass-sim0:0:0:2): Medium not present (da4:umass-sim0:0:0:2): Unretryable error Opened disk da4 -> 6 (da4:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 (da4:umass-sim0:0:0:2): CAM Status: SCSI Status Error (da4:umass-sim0:0:0:2): SCSI Status: Check Condition (da4:umass-sim0:0:0:2): NOT READY asc:3a,0 (da4:umass-sim0:0:0:2): Medium not present (da4:umass-sim0:0:0:2): Unretryable error Opened disk da4 -> 6 (da4:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 (da4:umass-sim0:0:0:2): CAM Status: SCSI Status Error (da4:umass-sim0:0:0:2): SCSI Status: Check Condition (da4:umass-sim0:0:0:2): NOT READY asc:3a,0 (da4:umass-sim0:0:0:2): Medium not present (da4:umass-sim0:0:0:2): Unretryable error Opened disk da4 -> 6 (da5:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 (da5:umass-sim0:0:0:3): CAM Status: SCSI Status Error (da5:umass-sim0:0:0:3): SCSI Status: Check Condition (da5:umass-sim0:0:0:3): NOT READY asc:3a,0 (da5:umass-sim0:0:0:3): Medium not present (da5:umass-sim0:0:0:3): Unretryable error Opened disk da5 -> 6 (da5:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 (da5:umass-sim0:0:0:3): CAM Status: SCSI Status Error (da5:umass-sim0:0:0:3): SCSI Status: Check Condition (da5:umass-sim0:0:0:3): NOT READY asc:3a,0 (da5:umass-sim0:0:0:3): Medium not present (da5:umass-sim0:0:0:3): Unretryable error Opened disk da5 -> 6 (da5:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 (da5:umass-sim0:0:0:3): CAM Status: SCSI Status Error (da5:umass-sim0:0:0:3): SCSI Status: Check Condition (da5:umass-sim0:0:0:3): NOT READY asc:3a,0 (da5:umass-sim0:0:0:3): Medium not present (da5:umass-sim0:0:0:3): Unretryable error Opened disk da5 -> 6 Trying to mount root from ufs:/dev/da1s1a ## END DMESG.BOOT ## It's probably safe to ignore the CAM spam there - it's because of my umass CF/SD/MS/Etc reader which had no media in it at boot. ## BEGIN PCICONF -lv ## none0_at_pci0:0:0: class=0x058000 card=0x289510f1 chip=0x005e10de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 Memory Controller' class = memory isab0_at_pci0:1:0: class=0x060100 card=0x289510f1 chip=0x005110de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' class = bridge subclass = PCI-ISA none1_at_pci0:1:1: class=0x0c0500 card=0x289510f1 chip=0x005210de rev=0xa2 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 SMBus' class = serial bus subclass = SMBus ohci0_at_pci0:2:0: class=0x0c0310 card=0x289510f1 chip=0x005a10de rev=0xa2 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 USB Controller' class = serial bus subclass = USB ehci0_at_pci0:2:1: class=0x0c0320 card=0x289510f1 chip=0x005b10de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 USB 2.0 Controller' class = serial bus subclass = USB atapci0_at_pci0:6:0: class=0x01018a card=0x289510f1 chip=0x005310de rev=0xf2 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 Parallel ATA Controller' class = mass storage subclass = ATA pcib1_at_pci0:9:0: class=0x060401 card=0x0000008c chip=0x005c10de rev=0xa2 hdr=0x01 vendor = 'NVIDIA Corporation' device = 'nForce4 PCI Bridge' class = bridge subclass = PCI-PCI nve0_at_pci0:10:0: class=0x020000 card=0x289510f1 chip=0x005610de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 Ethernet Controller' class = network subclass = ethernet pcib2_at_pci0:14:0: class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3 hdr=0x01 vendor = 'NVIDIA Corporation' device = 'nForce4 PCI Express Bridge' class = bridge subclass = PCI-PCI hostb0_at_pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron HyperTransport Technology Configuration' class = bridge subclass = HOST-PCI hostb1_at_pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron Address Map' class = bridge subclass = HOST-PCI hostb2_at_pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron DRAM Controller' class = bridge subclass = HOST-PCI hostb3_at_pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron Miscellaneous Control' class = bridge subclass = HOST-PCI hostb4_at_pci0:25:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron HyperTransport Technology Configuration' class = bridge subclass = HOST-PCI hostb5_at_pci0:25:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron Address Map' class = bridge subclass = HOST-PCI hostb6_at_pci0:25:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron DRAM Controller' class = bridge subclass = HOST-PCI hostb7_at_pci0:25:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon 64 / Opteron Miscellaneous Control' class = bridge subclass = HOST-PCI none2_at_pci2:0:0: class=0x030000 card=0x0b121002 chip=0x71001002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' class = display subclass = VGA none3_at_pci2:0:1: class=0x038000 card=0x0b131002 chip=0x71201002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' class = display pcib4_at_pci8:10:0: class=0x060400 card=0x000000a0 chip=0x74501022 rev=0x12 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-8131 PCI-X Bridge' class = bridge subclass = PCI-PCI none4_at_pci8:10:1: class=0x080010 card=0x289510f1 chip=0x74511022 rev=0x01 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-8131 PCI-X IOAPIC' class = base peripheral subclass = interrupt controller pcib5_at_pci8:11:0: class=0x060400 card=0x000000a0 chip=0x74501022 rev=0x12 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-8131 PCI-X Bridge' class = bridge subclass = PCI-PCI none5_at_pci8:11:1: class=0x080010 card=0x289510f1 chip=0x74511022 rev=0x01 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-8131 PCI-X IOAPIC' class = base peripheral subclass = interrupt controller pcm0_at_pci9:4:0: class=0x040100 card=0x10021102 chip=0x00041102 rev=0x04 hdr=0x00 vendor = 'Creative Labs' device = 'SoundBlaster Audigy Audigy Audio Processor' class = multimedia subclass = audio emujoy0_at_pci9:4:1: class=0x098000 card=0x00601102 chip=0x70031102 rev=0x04 hdr=0x00 vendor = 'Creative Labs' device = 'EMU10K2 Audigy Gameport' class = input device fwohci0_at_pci9:4:2: class=0x0c0010 card=0x00101102 chip=0x40011102 rev=0x04 hdr=0x00 vendor = 'Creative Labs' device = 'EMU10K2 Audigy IEEE1394 Firewire Controller' class = serial bus subclass = FireWire ahd0_at_pci10:9:0: class=0x010000 card=0x00429005 chip=0x80129005 rev=0x03 hdr=0x00 vendor = 'Adaptec Inc' device = 'ASC-29320 Ultra320 SCSI Controller' class = mass storage subclass = SCSI ahd1_at_pci10:9:1: class=0x010000 card=0x00429005 chip=0x80129005 rev=0x03 hdr=0x00 vendor = 'Adaptec Inc' device = 'ASC-29320 Ultra320 SCSI Controller' class = mass storage subclass = SCSI none6_at_pci128:0:0: class=0x058000 card=0x289510f1 chip=0x005e10de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 Memory Controller' class = memory none7_at_pci128:1:0: class=0x058000 card=0x289510f1 chip=0x00d310de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 Memory Controller' class = memory pcib7_at_pci128:14:0: class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3 hdr=0x01 vendor = 'NVIDIA Corporation' device = 'nForce4 PCI Express Bridge' class = bridge subclass = PCI-PCI nvidia0_at_pci129:0:0: class=0x030000 card=0x2084107d chip=0x029110de rev=0xa1 hdr=0x00 vendor = 'NVIDIA Corporation' class = display subclass = VGA ## END PCICONF -lv ## ## BEGIN USBDEVS -d -v ## Controller /dev/usb0: addr 125: full speed, power 500 mA, config 1, Embedded Reader(0x0240), Apacer(0x0d7d), rev 1.00 umass0 addr 126: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc01e), Logitech(0x046d), rev 22.00 ums0 addr 127: full speed, self powered, config 1, OHCI root hub(0x0000), nVidia(0x0000), rev 1.00 uhub0 port 1 powered port 2 addr 126: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc01e), Logitech(0x046d), rev 22.00 ums0 port 3 powered port 4 powered port 5 powered port 6 powered port 7 addr 125: full speed, power 500 mA, config 1, Embedded Reader(0x0240), Apacer(0x0d7d), rev 1.00 umass0 port 8 powered port 9 powered port 10 powered Controller /dev/usb1: addr 126: high speed, self powered, config 1, product 0x0901(0x0901), Western Digital(0x1058), rev 2.06 umass1 addr 127: high speed, self powered, config 1, EHCI root hub(0x0000), nVidia(0x0000), rev 1.00 uhub1 port 1 powered port 2 powered port 3 addr 126: high speed, self powered, config 1, product 0x0901(0x0901), Western Digital(0x1058), rev 2.06 umass1 port 4 powered port 5 powered port 6 powered port 7 powered port 8 powered port 9 powered port 10 powered ## END USBDEVS -d -v ## It hung for a bit just after "Controller /dev/usb1:" just before it printed the western digital stuff... it seems like it's having a really hard time with this in general. (Lots of timeouts?) If there is any other debug info I can give please let me know - the umass stuff seems pretty problematic in general, so getting any kinks out of it would be great :) (We'll combat the issue of unmounting a mounted umass device after it's already been removed another day!) -- Regards, Chris GilbertReceived on Wed Nov 01 2006 - 01:29:40 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:02 UTC