> This is typical Dell, and it gets even worse if you have a laptop. > Imagine every PCI device being on the sole interrupt line that is routed > on the motherboard. Growing MSI support would get around this for bce > and many other devices. > > Scott > why blame only Dell?, this is from a top of the line(?) IBM ibm-x3650> vmstat -i interrupt total rate irq4: sio0 15 0 irq15: ata1 47 0 irq16: bce0 28747 290 irq17: bce1 aac0 13 0 <----------------- irq23: uhci0 uhci+ 4 0 cpu0: timer 193265 1952 cpu1: timer 193080 1950 cpu2: timer 191979 1939 cpu3: timer 191978 1939 Total 799128 8072 with all the hipe on virtualization, I'm wandering if the day will come and we will have virtual irqs ... danny > > John Polstra wrote: > > I've been testing a Dell 1950 box with -current from late July. The > > box has two integrated BCM5708 gigabit ethernet interfaces that work > > with the bce driver. I noticed that both bce0 and bce1 are assigned > > to IRQ 16. With two IOAPICs on board, it's hard to believe that Dell > > would be so silly as to force the two gigabit interfaces to share an > > IRQ. Is this sharing really necessary, or is it caused by a bug or > > limitation in the OS? The verbose dmesg output follows below. > > > > Thanks, > > John > > > > KDB: current backend: ddb > > SMAP type=01 base=0000000000000000 len=00000000000a0000 > > SMAP type=01 base=0000000000100000 len=000000007fea8000 > > SMAP type=03 base=000000007ffa8000 len=000000000000fc00 > > SMAP type=02 base=000000007ffb7c00 len=0000000000048400 > > SMAP type=02 base=00000000e0000000 len=0000000010000000 > > SMAP type=02 base=00000000fe000000 len=0000000002000000 > > Copyright (c) 1992-2006 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 7.0-CURRENT #11: Wed Nov 1 16:43:44 PST 2006 > > jdp_at_f1.polstra.com:/usr/home/jdp/f5/robotcd/robotcd/src/sys/i386/compile/ROBOTCD > > Using 64 colors for the VM-PQ tuning (4096, 16) > > Preloaded elf kernel "/boot/kernel/kernel" at 0xc08aa000. > > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08aa14c. > > MP Configuration Table version 1.4 found at 0xc00f0000 > > Table 'FACP' at 0xf2b88 > > Table 'APIC' at 0xf2c7c > > MADT: Found table at 0xf2c7c > > APIC: Using the MADT enumerator. > > MADT: Found CPU APIC ID 0 ACPI ID 1: enabled > > SMP: Added CPU 0 (AP) > > MADT: Found CPU APIC ID 6 ACPI ID 2: enabled > > SMP: Added CPU 6 (AP) > > MADT: Found CPU APIC ID 1 ACPI ID 3: enabled > > SMP: Added CPU 1 (AP) > > MADT: Found CPU APIC ID 7 ACPI ID 4: enabled > > SMP: Added CPU 7 (AP) > > MADT: Found CPU APIC ID 20 ACPI ID 5: disabled > > MADT: Found CPU APIC ID 21 ACPI ID 6: disabled > > MADT: Found CPU APIC ID 22 ACPI ID 7: disabled > > MADT: Found CPU APIC ID 23 ACPI ID 8: disabled > > INTR: Adding local APIC 0 as a target > > ACPI APIC Table: <DELL PE_SC3 > > > Calibrating clock(s) ... i8254 clock: 1191852 Hz > > CLK_USE_I8254_CALIBRATION not specified - using default frequency > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > Calibrating TSC clock ... TSC clock: 2995804296 Hz > > CPU: Intel(R) Xeon(R) CPU 5160 _at_ 3.00GHz (2995.80-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, > > DTS,ACPI,MMX,FXSR,SSE,SSE > > 2,SS,HTT,TM,PBE> > > Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>,<b18>> > > AMD Features=0x20100000<NX,LM> > > AMD Features2=0x1<LAHF> > > Cores per package: 2 > > > > Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries > > 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size > > 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size > > L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line > > real memory = 2147123200 (2047 MB) > > Physical memory chunk(s): > > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > > 0x0000000000c28000 - 0x000000007db60fff, 2096336896 bytes (511801 pages) > > avail memory = 2096107520 (1999 MB) > > INTR: Adding local APIC 1 as a target > > INTR: Adding local APIC 6 as a target > > INTR: Adding local APIC 7 as a target > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > > cpu0 (BSP): APIC ID: 0 > > cpu1 (AP): APIC ID: 1 > > cpu2 (AP): APIC ID: 6 > > cpu3 (AP): APIC ID: 7 > > bios32: Found BIOS32 Service Directory header at 0xc00ffe80 > > bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 > > pcibios: PCI BIOS entry at 0xf0000+0xb46e > > pnpbios: Found PnP BIOS data at 0xc00fe2d0 > > pnpbios: Entry = f0000:e2f4 Rev = 1.0 > > Other BIOS signatures found: > > APIC: CPU 0 has ACPI ID 1 > > APIC: CPU 1 has ACPI ID 3 > > APIC: CPU 2 has ACPI ID 2 > > APIC: CPU 3 has ACPI ID 4 > > MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 > > ioapic0: Changing APIC ID to 8 > > ioapic0: Routing external 8259A's -> intpin 0 > > ioapic0: intpin 0 -> ExtINT (edge, high) > > ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) > > ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) > > ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) > > ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) > > ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) > > ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) > > ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) > > ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) > > ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) > > ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) > > ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) > > ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) > > ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) > > ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) > > ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) > > ioapic0: intpin 16 -> PCI IRQ 16 (level, low) > > ioapic0: intpin 17 -> PCI IRQ 17 (level, low) > > ioapic0: intpin 18 -> PCI IRQ 18 (level, low) > > ioapic0: intpin 19 -> PCI IRQ 19 (level, low) > > ioapic0: intpin 20 -> PCI IRQ 20 (level, low) > > ioapic0: intpin 21 -> PCI IRQ 21 (level, low) > > ioapic0: intpin 22 -> PCI IRQ 22 (level, low) > > ioapic0: intpin 23 -> PCI IRQ 23 (level, low) > > MADT: Found IO APIC ID 9, Interrupt 64 at 0xfec81000 > > ioapic1: Changing APIC ID to 9 > > ioapic1: WARNING: intbase 64 != expected base 24 > > ioapic1: intpin 0 -> PCI IRQ 64 (level, low) > > ioapic1: intpin 1 -> PCI IRQ 65 (level, low) > > ioapic1: intpin 2 -> PCI IRQ 66 (level, low) > > ioapic1: intpin 3 -> PCI IRQ 67 (level, low) > > ioapic1: intpin 4 -> PCI IRQ 68 (level, low) > > ioapic1: intpin 5 -> PCI IRQ 69 (level, low) > > ioapic1: intpin 6 -> PCI IRQ 70 (level, low) > > ioapic1: intpin 7 -> PCI IRQ 71 (level, low) > > ioapic1: intpin 8 -> PCI IRQ 72 (level, low) > > ioapic1: intpin 9 -> PCI IRQ 73 (level, low) > > ioapic1: intpin 10 -> PCI IRQ 74 (level, low) > > ioapic1: intpin 11 -> PCI IRQ 75 (level, low) > > ioapic1: intpin 12 -> PCI IRQ 76 (level, low) > > ioapic1: intpin 13 -> PCI IRQ 77 (level, low) > > ioapic1: intpin 14 -> PCI IRQ 78 (level, low) > > ioapic1: intpin 15 -> PCI IRQ 79 (level, low) > > ioapic1: intpin 16 -> PCI IRQ 80 (level, low) > > ioapic1: intpin 17 -> PCI IRQ 81 (level, low) > > ioapic1: intpin 18 -> PCI IRQ 82 (level, low) > > ioapic1: intpin 19 -> PCI IRQ 83 (level, low) > > ioapic1: intpin 20 -> PCI IRQ 84 (level, low) > > ioapic1: intpin 21 -> PCI IRQ 85 (level, low) > > ioapic1: intpin 22 -> PCI IRQ 86 (level, low) > > ioapic1: intpin 23 -> PCI IRQ 87 (level, low) > > lapic0: Routing NMI -> LINT1 > > lapic0: LINT1 trigger: edge > > lapic0: LINT1 polarity: high > > lapic6: Routing NMI -> LINT1 > > lapic6: LINT1 trigger: edge > > lapic6: LINT1 polarity: high > > lapic1: Routing NMI -> LINT1 > > lapic1: LINT1 trigger: edge > > lapic1: LINT1 polarity: high > > lapic7: Routing NMI -> LINT1 > > lapic7: LINT1 trigger: edge > > lapic7: LINT1 polarity: high > > MADT: Ignoring local NMI routed to ACPI CPU 5 > > MADT: Ignoring local NMI routed to ACPI CPU 6 > > MADT: Ignoring local NMI routed to ACPI CPU 7 > > MADT: Ignoring local NMI routed to ACPI CPU 8 > > MADT: Interrupt override: source 0, irq 2 > > ioapic0: Routing IRQ 0 -> intpin 2 > > ioapic0: intpin 2 trigger: edge > > ioapic0: intpin 2 polarity: high > > MADT: Interrupt override: source 9, irq 9 > > ioapic0: intpin 9 trigger: level > > ioapic0: intpin 9 polarity: high > > ioapic0 <Version 2.0> irqs 0-23 on motherboard > > ioapic1 <Version 2.0> irqs 64-87 on motherboard > > cpu0 BSP: > > ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > > timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 > > mem: <memory> > > Pentium Pro MTRR support enabled > > io: <I/O> > > null: <null device, zero device> > > nfslock: pseudo-device > > npx0: INT 16 interface > > acpi0: <DELL PE_SC3> on motherboard > > ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 > > acpi0: [MPSAFE] > > pci_open(1): mode 1 addr port (0x0cf8) is 0x80040080 > > pci_open(1a): mode1res=0x80000000 (0x80000000) > > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25c08086) > > pcibios: BIOS version 2.10 > > Found $PIR table, 21 entries at 0xc00fade0 > > PCI-Only Interrupts: none > > Location Bus Device Pin Link IRQs > > embedded 0 0 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 2 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 3 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 4 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 5 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 6 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 7 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 28 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 28 B 0x61 3 4 5 6 10 11 14 15 > > embedded 0 28 C 0x62 3 4 5 6 10 11 14 15 > > embedded 0 28 D 0x63 3 4 5 6 10 11 14 15 > > embedded 0 29 A 0x69 3 4 5 6 10 11 14 15 > > embedded 0 29 B 0x68 3 4 5 6 10 11 14 15 > > embedded 0 29 C 0x69 3 4 5 6 10 11 14 15 > > embedded 0 29 D 0x68 3 4 5 6 10 11 14 15 > > embedded 0 31 A 0x60 3 4 5 6 10 11 14 15 > > embedded 0 31 B 0x61 3 4 5 6 10 11 14 15 > > embedded 0 31 C 0x6b 3 4 5 6 10 11 14 15 > > embedded 5 0 A 0x60 3 4 5 6 10 11 14 15 > > embedded 5 0 B 0x61 3 4 5 6 10 11 14 15 > > embedded 5 0 C 0x62 3 4 5 6 10 11 14 15 > > embedded 5 0 D 0x63 3 4 5 6 10 11 14 15 > > embedded 6 0 A 0x60 3 4 5 6 10 11 14 15 > > embedded 6 1 A 0x60 3 4 5 6 10 11 14 15 > > embedded 8 0 A 0x60 3 4 5 6 10 11 14 15 > > embedded 8 0 B 0x61 3 4 5 6 10 11 14 15 > > embedded 8 0 C 0x62 3 4 5 6 10 11 14 15 > > embedded 8 0 D 0x63 3 4 5 6 10 11 14 15 > > embedded 1 0 A 0x60 3 4 5 6 10 11 14 15 > > embedded 1 0 B 0x61 3 4 5 6 10 11 14 15 > > embedded 1 0 C 0x62 3 4 5 6 10 11 14 15 > > embedded 1 0 D 0x63 3 4 5 6 10 11 14 15 > > embedded 2 8 A 0x60 3 4 5 6 10 11 14 15 > > embedded 2 8 B 0x61 3 4 5 6 10 11 14 15 > > embedded 2 14 A 0x62 3 4 5 6 10 11 14 15 > > slot 1 11 0 A 0x60 3 4 5 6 10 11 14 15 > > slot 1 11 0 B 0x61 3 4 5 6 10 11 14 15 > > slot 1 11 0 C 0x62 3 4 5 6 10 11 14 15 > > slot 1 11 0 D 0x63 3 4 5 6 10 11 14 15 > > slot 2 13 0 A 0x60 3 4 5 6 10 11 14 15 > > slot 2 13 0 B 0x61 3 4 5 6 10 11 14 15 > > slot 2 13 0 C 0x62 3 4 5 6 10 11 14 15 > > slot 2 13 0 D 0x63 3 4 5 6 10 11 14 15 > > embedded 4 0 A 0x60 3 4 5 6 10 11 14 15 > > embedded 4 0 B 0x61 3 4 5 6 10 11 14 15 > > embedded 4 0 C 0x62 3 4 5 6 10 11 14 15 > > embedded 4 0 D 0x63 3 4 5 6 10 11 14 15 > > embedded 15 13 A 0x63 3 4 5 6 10 11 14 15 > > AcpiOsDerivePciId: bus 0 dev 31 func 0 > > acpi0: Power Button (fixed) > > acpi0: wakeup code va 0xd88c9000 pa 0x9e000 > > AcpiOsDerivePciId: bus 0 dev 16 func 1 > > AcpiOsDerivePciId: bus 0 dev 16 func 0 > > ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > > pci_link0: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 6 N 0 3 4 5 6 7 10 11 12 > > pci_link0: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 6 N 0 3 4 5 6 7 10 11 12 > > pci_link0: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link1: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link1: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link1: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link2: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link2: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link2: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link3: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 5 N 0 3 4 5 6 7 10 11 12 > > pci_link3: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 5 N 0 3 4 5 6 7 10 11 12 > > pci_link3: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link4: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 10 N 0 3 4 5 6 7 10 11 12 > > pci_link4: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 10 N 0 3 4 5 6 7 10 11 12 > > pci_link4: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link5: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 11 N 0 3 4 5 6 7 10 11 12 > > pci_link5: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 11 N 0 3 4 5 6 7 10 11 12 > > pci_link5: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link6: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link6: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link6: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link7: Links after initial probe: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link7: Links after initial validation: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > pci_link7: Links after disable: > > Index IRQ Rtd Ref IRQs > > 0 255 N 0 3 4 5 6 7 10 11 12 > > cpu0: <ACPI CPU> on acpi0 > > cpu1: <ACPI CPU> on acpi0 > > cpu2: <ACPI CPU> on acpi0 > > cpu3: <ACPI CPU> on acpi0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > pci0: physical bus=0 > > found-> vendor=0x8086, dev=0x25c0, revid=0x12 > > bus=0, slot=0, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > powerspec 2 supports D0 D3 current D0 > > MSI supports 2 messages > > found-> vendor=0x8086, dev=0x25e2, revid=0x12 > > bus=0, slot=2, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > found-> vendor=0x8086, dev=0x25e3, revid=0x12 > > bus=0, slot=3, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > found-> vendor=0x8086, dev=0x25f8, revid=0x12 > > bus=0, slot=4, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > found-> vendor=0x8086, dev=0x25e5, revid=0x12 > > bus=0, slot=5, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f9, revid=0x12 > > bus=0, slot=6, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > found-> vendor=0x8086, dev=0x25e7, revid=0x12 > > bus=0, slot=7, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f0, revid=0x12 > > bus=0, slot=16, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f0, revid=0x12 > > bus=0, slot=16, func=1 > > class=06-00-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f0, revid=0x12 > > bus=0, slot=16, func=2 > > class=06-00-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f1, revid=0x12 > > bus=0, slot=17, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f3, revid=0x12 > > bus=0, slot=19, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f5, revid=0x12 > > bus=0, slot=21, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x25f6, revid=0x12 > > bus=0, slot=22, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x2690, revid=0x09 > > bus=0, slot=28, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=1 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > found-> vendor=0x8086, dev=0x2688, revid=0x09 > > bus=0, slot=29, func=0 > > class=0c-03-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=11 > > map[20]: type 4, range 32, base 0000cce0, size 5, enabled > > pcib0: matched entry for 0.29.INTA > > pcib0: slot 29 INTA hardwired to IRQ 21 > > found-> vendor=0x8086, dev=0x2689, revid=0x09 > > bus=0, slot=29, func=1 > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=b, irq=10 > > map[20]: type 4, range 32, base 0000ccc0, size 5, enabled > > pcib0: matched entry for 0.29.INTB > > pcib0: slot 29 INTB hardwired to IRQ 20 > > found-> vendor=0x8086, dev=0x268a, revid=0x09 > > bus=0, slot=29, func=2 > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=c, irq=11 > > map[20]: type 4, range 32, base 0000cca0, size 5, enabled > > pcib0: matched entry for 0.29.INTC > > pcib0: slot 29 INTC hardwired to IRQ 21 > > found-> vendor=0x8086, dev=0x268c, revid=0x09 > > bus=0, slot=29, func=7 > > class=0c-03-20, hdrtype=0x00, mfdev=0 > > cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=11 > > powerspec 2 supports D0 D3 current D0 > > map[10]: type 1, range 32, base fc600000, size 10, enabled > > pcib0: matched entry for 0.29.INTA > > pcib0: slot 29 INTA hardwired to IRQ 21 > > found-> vendor=0x8086, dev=0x244e, revid=0xd9 > > bus=0, slot=30, func=0 > > class=06-04-01, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x2670, revid=0x09 > > bus=0, slot=31, func=0 > > class=06-01-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > found-> vendor=0x8086, dev=0x269e, revid=0x09 > > bus=0, slot=31, func=1 > > class=01-01-8a, hdrtype=0x00, mfdev=0 > > cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > map[20]: type 4, range 32, base 0000fc00, size 4, enabled > > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > > pcib1: secondary bus 5 > > pcib1: subordinate bus 10 > > pcib1: I/O decode 0xf000-0xfff > > pcib1: memory decode 0xf2000000-0xf7ffffff > > pcib1: prefetched decode 0xfff00000-0xfffff > > pci5: <ACPI PCI bus> on pcib1 > > pci5: physical bus=5 > > found-> vendor=0x8086, dev=0x3500, revid=0x01 > > bus=5, slot=0, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=1 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > found-> vendor=0x8086, dev=0x350c, revid=0x01 > > bus=5, slot=0, func=3 > > class=06-04-00, hdrtype=0x01, mfdev=1 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > > pcib2: secondary bus 6 > > pcib2: subordinate bus 9 > > pcib2: I/O decode 0xf000-0xfff > > pcib2: memory decode 0xf4000000-0xf7ffffff > > pcib2: prefetched decode 0xfff00000-0xfffff > > pci6: <ACPI PCI bus> on pcib2 > > pci6: physical bus=6 > > found-> vendor=0x8086, dev=0x3510, revid=0x01 > > bus=6, slot=0, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > found-> vendor=0x8086, dev=0x3514, revid=0x01 > > bus=6, slot=1, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=255 > > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci6 > > pcib3: secondary bus 7 > > pcib3: subordinate bus 8 > > pcib3: I/O decode 0xf000-0xfff > > pcib3: memory decode 0xf4000000-0xf7ffffff > > pcib3: prefetched decode 0xfff00000-0xfffff > > pci7: <ACPI PCI bus> on pcib3 > > pci7: physical bus=7 > > found-> vendor=0x1166, dev=0x0103, revid=0xc2 > > bus=7, slot=0, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) > > pcib4: <PCI-PCI bridge> at device 0.0 on pci7 > > pcib4: secondary bus 8 > > pcib4: subordinate bus 8 > > pcib4: I/O decode 0xf000-0xfff > > pcib4: memory decode 0xf4000000-0xf7ffffff > > pcib4: prefetched decode 0xfff00000-0xfffff > > pci8: <PCI bus> on pcib4 > > pci8: physical bus=8 > > found-> vendor=0x14e4, dev=0x164c, revid=0x11 > > bus=8, slot=0, func=0 > > class=02-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords) > > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=6 > > powerspec 2 supports D0 D3 current D0 > > MSI supports 1 message, 64 bit > > map[10]: type 1, range 64, base f4000000, size 25, enabled > > pcib4: (null) requested memory range 0xf4000000-0xf5ffffff: good > > pcib3: (null) requested memory range 0xf4000000-0xf5ffffff: good > > pcib2: (null) requested memory range 0xf4000000-0xf5ffffff: good > > pcib1: (null) requested memory range 0xf4000000-0xf5ffffff: good > > pcib3: matched entry for 7.0.INTA > > pcib3: slot 0 INTA hardwired to IRQ 16 > > pcib4: slot 0 INTA is routed to irq 16 > > bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf4000000-0xf5ffffff irq 16 at > > device 0.0 on pci8 > > bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000 > > bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz > > miibus0: <MII bus> on bce0 > > brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0 > > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > > bce0: bpf attached > > bce0: Ethernet address: 00:15:c5:e6:b6:ab > > ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 > > bce0: [MPSAFE] > > pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci6 > > pcib5: secondary bus 9 > > pcib5: subordinate bus 9 > > pcib5: I/O decode 0xf000-0xfff > > pcib5: memory decode 0xfff00000-0xfffff > > pcib5: prefetched decode 0xfff00000-0xfffff > > pci9: <ACPI PCI bus> on pcib5 > > pci9: physical bus=9 > > pcib6: <PCI-PCI bridge> at device 0.3 on pci5 > > pcib6: secondary bus 10 > > pcib6: subordinate bus 10 > > pcib6: I/O decode 0xf000-0xfff > > pcib6: memory decode 0xfff00000-0xfffff > > pcib6: prefetched decode 0xfff00000-0xfffff > > pci10: <PCI bus> on pcib6 > > pci10: physical bus=10 > > pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > > pcib7: secondary bus 1 > > pcib7: subordinate bus 2 > > pcib7: I/O decode 0xe000-0xefff > > pcib7: memory decode 0xfc300000-0xfc5fffff > > pcib7: prefetched decode 0xfff00000-0xfffff > > pci1: <ACPI PCI bus> on pcib7 > > pci1: physical bus=1 > > found-> vendor=0x8086, dev=0x032c, revid=0x09 > > bus=1, slot=0, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=1 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) > > pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > > pcib8: secondary bus 2 > > pcib8: subordinate bus 2 > > pcib8: I/O decode 0xe000-0xefff > > pcib8: memory decode 0xfc400000-0xfc5fffff > > pcib8: prefetched decode 0xfff00000-0xfffff > > pci2: <ACPI PCI bus> on pcib8 > > pci2: physical bus=2 > > found-> vendor=0x1000, dev=0x0054, revid=0x01 > > bus=2, slot=8, func=0 > > class=01-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) > > lattimer=0x48 (2160 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns) > > intpin=a, irq=6 > > powerspec 2 supports D0 D1 D2 D3 current D0 > > MSI supports 1 message, 64 bit > > map[10]: type 4, range 32, base 0000ec00, size 8, enabled > > pcib8: (null) requested I/O range 0xec00-0xecff: in range > > pcib7: (null) requested I/O range 0xec00-0xecff: in range > > map[14]: type 1, range 64, base fc4fc000, size 14, enabled > > pcib8: (null) requested memory range 0xfc4fc000-0xfc4fffff: good > > pcib7: (null) requested memory range 0xfc4fc000-0xfc4fffff: good > > map[1c]: type 1, range 64, base fc4e0000, size 16, enabled > > pcib8: (null) requested memory range 0xfc4e0000-0xfc4effff: good > > pcib7: (null) requested memory range 0xfc4e0000-0xfc4effff: good > > pcib8: matched entry for 2.8.INTA > > pcib8: slot 8 INTA hardwired to IRQ 64 > > pci2: <mass storage, SCSI> at device 8.0 (no driver attached) > > pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > > pcib9: secondary bus 11 > > pcib9: subordinate bus 11 > > pcib9: I/O decode 0xf000-0xfff > > pcib9: memory decode 0xfff00000-0xfffff > > pcib9: prefetched decode 0xfff00000-0xfffff > > pci11: <ACPI PCI bus> on pcib9 > > pci11: physical bus=11 > > pcib10: <PCI-PCI bridge> at device 5.0 on pci0 > > pcib10: secondary bus 12 > > pcib10: subordinate bus 12 > > pcib10: I/O decode 0xf000-0xfff > > pcib10: memory decode 0xfff00000-0xfffff > > pcib10: prefetched decode 0xfff00000-0xfffff > > pci12: <PCI bus> on pcib10 > > pci12: physical bus=12 > > pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > > pcib11: secondary bus 13 > > pcib11: subordinate bus 13 > > pcib11: I/O decode 0xf000-0xfff > > pcib11: memory decode 0xfff00000-0xfffff > > pcib11: prefetched decode 0xfff00000-0xfffff > > pci13: <ACPI PCI bus> on pcib11 > > pci13: physical bus=13 > > pcib12: <PCI-PCI bridge> at device 7.0 on pci0 > > pcib12: secondary bus 14 > > pcib12: subordinate bus 14 > > pcib12: I/O decode 0xf000-0xfff > > pcib12: memory decode 0xfff00000-0xfffff > > pcib12: prefetched decode 0xfff00000-0xfffff > > pci14: <PCI bus> on pcib12 > > pci14: physical bus=14 > > pcib13: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > > pcib13: secondary bus 3 > > pcib13: subordinate bus 4 > > pcib13: I/O decode 0xf000-0xfff > > pcib13: memory decode 0xf8000000-0xfbffffff > > pcib13: prefetched decode 0xfff00000-0xfffff > > pci3: <ACPI PCI bus> on pcib13 > > pci3: physical bus=3 > > found-> vendor=0x1166, dev=0x0103, revid=0xc2 > > bus=3, slot=0, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) > > pcib14: <PCI-PCI bridge> at device 0.0 on pci3 > > pcib14: secondary bus 4 > > pcib14: subordinate bus 4 > > pcib14: I/O decode 0xf000-0xfff > > pcib14: memory decode 0xf8000000-0xfbffffff > > pcib14: prefetched decode 0xfff00000-0xfffff > > pci4: <PCI bus> on pcib14 > > pci4: physical bus=4 > > found-> vendor=0x14e4, dev=0x164c, revid=0x11 > > bus=4, slot=0, func=0 > > class=02-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords) > > lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=6 > > powerspec 2 supports D0 D3 current D0 > > MSI supports 1 message, 64 bit > > map[10]: type 1, range 64, base f8000000, size 25, enabled > > pcib14: (null) requested memory range 0xf8000000-0xf9ffffff: good > > pcib13: (null) requested memory range 0xf8000000-0xf9ffffff: good > > pcib13: matched entry for 3.0.INTA > > pcib13: slot 0 INTA hardwired to IRQ 16 > > pcib14: slot 0 INTA is routed to irq 16 > > bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf8000000-0xf9ffffff irq 16 at > > device 0.0 on pci4 > > bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000 > > bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz > > miibus1: <MII bus> on bce1 > > brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1 > > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > > bce1: bpf attached > > bce1: Ethernet address: 00:15:c5:e6:b6:a9 > > bce1: [MPSAFE] > > pci0: <serial bus, USB> at device 29.0 (no driver attached) > > pci0: <serial bus, USB> at device 29.1 (no driver attached) > > pci0: <serial bus, USB> at device 29.2 (no driver attached) > > pci0: <serial bus, USB> at device 29.7 (no driver attached) > > pcib15: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > pcib15: secondary bus 15 > > pcib15: subordinate bus 15 > > pcib15: I/O decode 0xd000-0xdfff > > pcib15: memory decode 0xfc100000-0xfc2fffff > > pcib15: prefetched decode 0xd8000000-0xdfffffff > > pcib15: Subtractively decoded bridge. > > pci15: <ACPI PCI bus> on pcib15 > > pci15: physical bus=15 > > found-> vendor=0x1002, dev=0x515e, revid=0x02 > > bus=15, slot=13, func=0 > > class=03-00-00, hdrtype=0x00, mfdev=0 > > cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords) > > lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=5 > > powerspec 2 supports D0 D1 D2 D3 current D0 > > map[10]: type 3, range 32, base d8000000, size 27, enabled > > pcib15: (null) requested memory range 0xd8000000-0xdfffffff: good > > map[14]: type 4, range 32, base 0000dc00, size 8, enabled > > pcib15: (null) requested I/O range 0xdc00-0xdcff: in range > > map[18]: type 1, range 32, base fc1f0000, size 16, enabled > > pcib15: (null) requested memory range 0xfc1f0000-0xfc1fffff: good > > pcib15: matched entry for 15.13.INTA > > pcib15: slot 13 INTA hardwired to IRQ 19 > > vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem > > 0xd8000000-0xdfffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on p > > ci15 > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device > > 31.1 on pci0 > > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 > > ata0: <ATA channel 0> on atapci0 > > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > > ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > > ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 > > ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> > > ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 > > ata0: [MPSAFE] > > ata1: <ATA channel 1> on atapci0 > > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > > ata1: reset tp1 mask=00 ostat0=ff ostat1=ff > > ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 > > ata1: [MPSAFE] > > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > > acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size > > Timecounter "HPET" frequency 14318180 Hz quality -200 > > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > > fdc0: does not respond > > device_attach: fdc0 attach returned 6 > > sio0: irq maps: 0x4c61 0x4c71 0x4c61 0x4c61 > > sio0: irq maps: 0x4c61 0x4c71 0x4c60 0x4c61 > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > > sio0: type 16550A, console > > ioapic0: routing intpin 4 (ISA IRQ 4) to vector 52 > > sio0: [FAST] > > sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61 > > sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61 > > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > > sio1: type 16550A > > ioapic0: routing intpin 3 (ISA IRQ 3) to vector 53 > > sio1: [FAST] > > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > > fdc0: does not respond > > device_attach: fdc0 attach returned 6 > > ata: ata0 already exists; skipping it > > ata: ata1 already exists; skipping it > > fdc: fdc0 already exists; skipping it > > sio: sio0 already exists; skipping it > > sio: sio1 already exists; skipping it > > pnp_identify: Trying Read_Port at 203 > > pnp_identify: Trying Read_Port at 243 > > pnp_identify: Trying Read_Port at 283 > > pnp_identify: Trying Read_Port at 2c3 > > pnp_identify: Trying Read_Port at 303 > > pnp_identify: Trying Read_Port at 343 > > pnp_identify: Trying Read_Port at 383 > > pnp_identify: Trying Read_Port at 3c3 > > PNP Identify complete > > sc: sc0 already exists; skipping it > > vga: vga0 already exists; skipping it > > ahc_isa_probe 0: ioport 0xc00 alloc failed > > ahc_isa_probe 12: ioport 0xcc00 alloc failed > > ahc_isa_probe 13: ioport 0xdc00 alloc failed > > ahc_isa_probe 14: ioport 0xec00 alloc failed > > isa_probe_children: disabling PnP devices > > isa_probe_children: probing non-PnP devices > > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xcf000-0xd07ff,0xec000-0xeffff > > pnpid ORM0000 on isa0 > > adv0: not probed (disabled) > > aha0: not probed (disabled) > > aic0: not probed (disabled) > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > atkbd: the current kbd controller command byte 0065 > > atkbd: keyboard ID 0x41ab (2) > > kbdc: RESET_KBD return code:00fa > > kbdc: RESET_KBD status:00aa > > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 > > ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54 > > atkbd0: [GIANT-LOCKED] > > psm0: current command byte:0065 > > kbdc: TEST_AUX_PORT status:ffffffff > > kbdc: DIAGNOSE status:0055 > > kbdc: TEST_KBD_PORT status:0055 > > psm: keyboard port failed. > > psm0: the aux port is not functioning (-1). > > bt0: not probed (disabled) > > cs0: not probed (disabled) > > ed0: not probed (disabled) > > fe0: not probed (disabled) > > ie0: not probed (disabled) > > le0: not probed (disabled) > > ppc0 failed to probe at irq 7 on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x100> > > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > > sio2: not probed (disabled) > > sio3: not probed (disabled) > > sn0: not probed (disabled) > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > vt0: not probed (disabled) > > isa_probe_children: probing PnP devices > > Device configuration finished. > > Reducing kern.maxvnodes 134345 -> 100000 > > procfs registered > > lapic: Divisor 2, Frequency 166433579 hz > > Timecounter "TSC" frequency 2995804296 Hz quality -100 > > Timecounters tick every 1.000 msec > > lo0: bpf attached > > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > > acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> CDRW drive at ata0 as master > > acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 > > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet > > acd0: Writes: CDR, CDRW, test write, burnproof > > acd0: Audio: play, 256 volume levels > > acd0: Mechanism: ejectable tray, unlocked > > acd0: Medium: no/blank disc > > SMP: AP CPU #1 Launched! > > cpu1 AP: > > ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 > > SMP: AP CPU #3 Launched! > > cpu3 AP: > > ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 > > SMP: AP CPU #2 Launched! > > cpu2 AP: > > ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 > > INTR: Assigning IRQ 1 to local APIC 0 > > ioapic0: Assigning ISA IRQ 1 to local APIC 0 > > INTR: Assigning IRQ 3 to local APIC 1 > > ioapic0: Assigning ISA IRQ 3 to local APIC 1 > > INTR: Assigning IRQ 4 to local APIC 6 > > ioapic0: Assigning ISA IRQ 4 to local APIC 6 > > INTR: Assigning IRQ 9 to local APIC 7 > > ioapic0: Assigning ISA IRQ 9 to local APIC 7 > > INTR: Assigning IRQ 14 to local APIC 0 > > ioapic0: Assigning ISA IRQ 14 to local APIC 0 > > INTR: Assigning IRQ 15 to local APIC 1 > > ioapic0: Assigning ISA IRQ 15 to local APIC 1 > > INTR: Assigning IRQ 16 to local APIC 6 > > ioapic0: Assigning PCI IRQ 16 to local APIC 6 > > pmc: Unknown Intel CPU. > > module_register_init: MOD_LOAD (hwpmc, 0xc0535401, 0xc0738954) error 78 > > Trying to mount root from nfs: > > bNcFeS1 :R OlOiTn:k 6s4t.a8t1e. 1c8h9a.n7g1e:d/ ttfot pDbOoWoNt > > > > bce1: link state changed to UP > > start_init: trying /sbin/init > > bce0: link state changed to DOWN > > Interface bce1 IP-Address 64.81.189.84 Broadcast 64.81.189.95 > > Loading configuration files. > > No suitable dump device was found. > > Entropy harvesting:. > > Starting file system checks: > > Mounting local file systems:. > > Setting hostname: f3.polstra.com. > > kern.module_path: /boot/kernel;/boot/modules -> /;/boot/kernel;/boot/modules > > net.inet.icmp.bmcastecho: 0 -> 1 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > > inet 127.0.0.1 netmask 0xff000000 > > Starting devd. > > net.inet6.ip6.accept_rtadv: 0 -> 1 > > hw.acpi.cpu.cx_lowest: C1 -> C1 > > Generating host.conf. > > Additional routing options: tcp extensions=NO. > > add net ::ffff:0.0.0.0: gateway ::1 > > add net ::0.0.0.0: gateway ::1 > > net.inet6.ip6.forwarding: 0 -> 0 > > net.inet6.ip6.accept_rtadv: 1 -> 1 > > add net fe80::: gateway ::1 > > add net ff02::: gateway ::1 > > IPv4 mapped IPv6 address support=NO > > Mounting NFS file systems:. > > Creating and/or trimming log files:. > > Starting syslogd. > > Nov 1 20:04:31 f3 syslogd: kernel boot file is /boot/kernel/kernel > > /etc/rc: WARNING: Dump device does not exist. Savecore not run. > > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib > > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aoutsp > > Initial i386 ilnitialization:.a > > Additional ABI ssupport:. > > hStarting rpcbind:. > > NFS access ca che time=60 > > Stairting local daemmons:. > > Configuriang syscons: blangktime screensaveer decoder found: blank_saver > > . > > Local package initialization: webctld. > > Additional TCP options:. > > Starting inetd. > > > > Wed Nov 1 20:04:32 UTC 2006 > > > > FreeBSD/i386 (f3.polstra.com) (ttyd0) > > > > login: > > _______________________________________________ > > freebsd-current_at_freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-current > > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Fri Nov 03 2006 - 09:58:59 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:02 UTC