[ No response from the -usb list, so I'll try here. ] Howdy, I have a new Dell Latitude D620, and using recent -current I get this: ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0 ehci0: Could not map memory device_attach: ehci0 attach returned 6 FWIW, I also saw a user on the -stable list report this same problem. I'm assuming this is bad, but what to do about it? I'm also getting some unknown devices: uhub4: <vendor 0x413c product 0xa005, class 9/0, rev 2.00/50.18, addr 2> on uhub0 uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 3> on uhub4 ugen2: <vendor 0x413c product 0x8103, class 224/1, rev 2.00/24.22, addr 6> on uhub4 uhub6: <vendor 0x413c product 0x0058, class 9/0, rev 2.00/0.00, addr 2> on uhub3 Vendor ID 0x413c is Dell, and is already in the usbdevs file. The other vendor is O2, and I got their ID for the attached patch from the list at http://www.usb.org/developers/tools. The 0x0058 device is already in our usbdevs file, it's the port replicator (docking station) that the laptop is plugged into currently. I added the 0x8103 device in the attached patch based on an entry in the NetBSD usbdevs file. (The entry makes sense to me as well, since I have one of those.) So I have two questions ... for the devices (and vendors) that are already in my local usbdevs file, why are they still showing up by ID? And how do I find the device IDs for the two unknown devices? I imagine that the O2 device is related to my built in smart card reader, not sure about the other one. Thanks, Doug -- This .signature sanitized for your protection Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: full speed, self powered, config 1, product 0xa005(0xa005), vendor 0x413c(0x413c), rev 50.18 port 1 powered port 2 powered port 3 addr 3: full speed, power 200 mA, config 1, product 0x7761(0x7761), vendor 0x0b97(0x0b97), rev 1.10 port 1 addr 4: full speed, power 100 mA, config 1, Biometric Coprocessor(0x2016), STMicroelectronics(0x0483), rev 0.01 port 2 addr 5: full speed, self powered, config 1, O2Micro CCID SC Reader(0x7762), O2(0x0b97), rev 1.10 port 3 powered port 4 addr 6: full speed, self powered, config 1, product 0x8103(0x8103), vendor 0x413c(0x413c), rev 24.22 Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: full speed, self powered, config 1, product 0x0058(0x0058), vendor 0x413c(0x413c), rev 0.00 port 1 addr 3: full speed, self powered, config 1, USB2.0 Hub Controller(0x0058), NEC Corporation(0x0409), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 2 powered port 3 addr 4: low speed, power 100 mA, config 1, Trackball(0xc404), Logitech(0x046d), rev 2.20 port 4 powered Index: usbdevs =================================================================== RCS file: /usr/local/ncvs/src/sys/dev/usb/usbdevs,v retrieving revision 1.278 diff -u -u -r1.278 usbdevs --- usbdevs 15 Nov 2006 09:13:24 -0000 1.278 +++ usbdevs 22 Nov 2006 00:10:13 -0000 _at__at_ -465,6 +465,7 _at__at_ vendor ZEEVO 0x0b7a Zeevo vendor KURUSUGAWA 0x0b7e Kurusugawa vendor ASIX 0x0b95 ASIX +vendor O2Micro 0x0b97 O2 Micro, Inc. vendor USR 0x0baf U.S. Robotics vendor REALTEK 0x0bda RealTek vendor ADDONICS2 0x0bf6 Addonics _at__at_ -821,6 +822,8 _at__at_ /* Dell products */ product DELL PORT 0x0058 Port Replicator product DELL BC02 0x8000 BC02 Bluetooth USB Adapter +product DELL TM350 0x8103 TrueMobile 350 Bluetooth USB Adapter + /* Delorme Paublishing products */ product DELORME EARTHMATE 0x0100 Earthmate GPS
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:03 UTC