Re: Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers.

Driver works on the Intel Mac Mini I have.

dmesg:
   mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0x1000-0x10ff  
mem 0x90200000-  0x90203fff irq 16 at device 0.0 on pci1
   mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0x90200000
   mskc0: RAM buffer size : 48KB
   mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
   mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
   msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on  
mskc0
   msk0: bpf attached
   msk0: Ethernet address: 00:16:cb:a3:de:6b
   miibus0: <MII bus> on msk0
   e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0
   e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,  
1000baseTX-FDX, auto
   ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
   mskc0: [MPSAFE]
   mskc0: [FAST]

pciconf:
   mskc0_at_pci1:0:0: class=0x020000 card=0x532111ab chip=0x436211ab  
rev=0x22 hdr=0x00
       vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
       device   = '88E8053 Yukon PCI-E Gigabit Ethernet Controller  
(copper)'
       class    = network
       subclass = ethernet

ifconfig:

   msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
         inet6 fe80::216:cbff:fea3:de6b%msk0 prefixlen 64 scopeid 0x1
         ether 00:16:cb:a3:de:6b
         media: Ethernet autoselect (100baseTX <full-duplex>)
         status: active

uname:

   FreeBSD macwolf.net.tamu.edu 7.0-CURRENT-200610 FreeBSD 7.0- 
CURRENT-200610 #0: Tue Oct 17 14:02:14 UTC 2006     root_at_:/usr/obj/ 
usr/src/sys/GENERIC  i386

Thank you very much for working on this driver.
--
DaveD