Andrey V. Elsukov wrote: > Hi, All! > > I have notebook Maxselect Mission GT3000. > A hardware configuration description (russian): > http://www.maxselect.ru/catalog/models.html?id=4024&template=normal > > o Mobile AMD Sempron > o NVIDIA C51MV+MCP51M > o PCI Express nVidia Geforce Go 6100 > o Realtek HDA > > I have several problems. One is with USB. > When i attach USB Flash disk it's not work. > > usbd_new_device: addr=2, getting first desc failed > uhub_explore: usb_new_device failed, error=IOERROR > uhub1: device problem (IOERROR), disabling port 4 > > http://butcher.heavennet.ru/dmesg.txt > http://butcher.heavennet.ru/pciconf.txt > I've attached dmesg and pciconf. > Any suggestions? > > ------------------------------------------------------------------------ > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 7.0-CURRENT #2: Sun Sep 24 15:03:02 MSD 2006 > butcher_at_btr-nb.properlan.net:/usr/obj/usr/src/sys/BTR > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0dae000. > Preloaded elf module "/boot/kernel/linux.ko" at 0xc0dae1c4. > Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0dae270. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0dae31c. > Calibrating clock(s) ... i8254 clock: 1193216 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 1607325121 Hz > CPU: Mobile AMD Sempron(tm) Processor 2600+ (1607.33-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0xf82 Stepping = 2 > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > AMD Features=0xc0500800<SYSCALL,NX,MMX+,3DNow!+,3DNow!> > Data TLB: 32 entries, fully associative > Instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L2 internal cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative > real memory = 468844544 (447 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000001025000 - 0x000000001b6fffff, 443396096 bytes (108251 pages) > avail memory = 445120512 (424 MB) > bios32: Found BIOS32 Service Directory header at 0xc00f8390 > bios32: Entry = 0xfdce4 (c00fdce4) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xfdce0+0x0 > pnpbios: Found PnP BIOS data at 0xc00f8420 > pnpbios: Entry = e9cd:86af Rev = 1.0 > Other BIOS signatures found: > ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> > wlan: <802.11 Link Layer> > nfslock: pseudo-device > kbd: new array size 4 > kbd1 at kbdmux0 > mem: <memory> > Pentium Pro MTRR support enabled > io: <I/O> > null: <null device, zero device> > random: <entropy source, Software, Yarrow> > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > npx0: INT 16 interface > acpi0: <PTLTD RSDT> on motherboard > acpi0: [MPSAFE] > pci_open(1): mode 1 addr port (0x0cf8) is 0x80007004 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=050000] [hdr=80] is there (id=02f310de) > pcibios: BIOS_PRESENT call failed > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 0 > acpi0: Power Button (fixed) > acpi0: wakeup code va 0xcb3c4000 pa 0x9d000 > atpic: Programming IRQ9 as level/low > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 1 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 1 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 10 func 1 > ACPI timer: 1/2 1/2 1/2 1/1 1/1 1/2 1/1 1/2 1/1 1/1 -> 10 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 > pci_link0: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link0: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link0: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link1: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 5 7 9 11 14 15 > pci_link1: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 5 7 9 11 14 15 > pci_link1: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link2: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link2: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link2: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link3: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link3: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link3: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link4: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link4: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link4: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link5: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link5: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link5: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link6: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 5 N 0 5 7 9 11 14 15 > pci_link6: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 5 N 0 5 7 9 11 14 15 > pci_link6: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link7: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link7: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link7: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link8: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 10 N 0 5 7 9 11 14 15 > pci_link8: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link8: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link9: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 5 7 9 11 14 15 > pci_link9: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 5 7 9 11 14 15 > pci_link9: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link10: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 10 N 0 5 7 9 11 14 15 > pci_link10: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link10: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link11: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 10 N 0 5 7 9 11 14 15 > pci_link11: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link11: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link12: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link12: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link12: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link13: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link13: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link13: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link14: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link14: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link14: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link15: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link15: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link15: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link16: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 7 N 0 5 7 9 11 14 15 > pci_link16: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 7 N 0 5 7 9 11 14 15 > pci_link16: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link17: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link17: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > pci_link17: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 11 14 15 > cpu0: <ACPI CPU> on acpi0 > powernow0: <PowerNow! K8> on cpu0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > ACPI: Found matching pin for 0.10.INTA at func 1: 10 > pci_link8: BIOS IRQ 10 for 0.10.INTA is invalid > ACPI: Found matching pin for 0.11.INTA at func 0: 11 > ACPI: Found matching pin for 0.11.INTB at func 1: 10 > pci_link10: BIOS IRQ 10 for 0.11.INTB is invalid > ACPI: Found matching pin for 0.20.INTA at func 0: 10 > pci_link11: BIOS IRQ 10 for 0.20.INTA is invalid > ACPI: Found matching pin for 0.16.INTB at func 1: 11 > ACPI: Found matching pin for 0.14.INTA at func 0: 7 > ACPI: Found matching pin for 0.5.INTA at func 0: 5 > pci0: <ACPI PCI bus> on pcib0 > pci0: physical bus=0 > found-> vendor=0x10de, dev=0x02f3, revid=0xa2 > bus=0, slot=0, func=0 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02fa, revid=0xa2 > bus=0, slot=0, func=1 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02fe, revid=0xa2 > bus=0, slot=0, func=2 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02f8, revid=0xa2 > bus=0, slot=0, func=3 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02f9, revid=0xa2 > bus=0, slot=0, func=4 > class=05-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02ff, revid=0xa2 > bus=0, slot=0, func=5 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x027f, revid=0xa2 > bus=0, slot=0, func=6 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x027e, revid=0xa2 > bus=0, slot=0, func=7 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x0247, revid=0xa2 > bus=0, slot=5, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 1, range 32, base c2000000, size 24, enabled > map[14]: type 3, range 64, base d0000000, size 28, enabled > map[1c]: type 1, range 64, base c1000000, size 24, enabled > pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LK3E:0) > pcib0: slot 5 INTA routed to irq 5 via \\_SB_.PCI0.LK3E > found-> vendor=0x10de, dev=0x0270, revid=0xa2 > bus=0, slot=9, func=0 > class=05-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x0260, revid=0xa3 > bus=0, slot=10, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x0264, revid=0xa3 > bus=0, slot=10, func=1 > class=0c-05-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[20]: type 4, range 32, base 00003040, size 6, enabled > map[24]: type 4, range 32, base 00003000, size 6, enabled > pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LSMB:0) > pci_link8: Picked IRQ 7 with weight 0 > pcib0: slot 10 INTA routed to irq 7 via \\_SB_.PCI0.LSMB > found-> vendor=0x10de, dev=0x026d, revid=0xa3 > bus=0, slot=11, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base c0004000, size 12, enabled > pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LUS0:0) > pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.LUS0 > found-> vendor=0x10de, dev=0x026e, revid=0xa3 > bus=0, slot=11, func=1 > class=0c-03-20, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base c0005000, size 8, enabled > pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LUS2:0) > pci_link10: Picked IRQ 9 with weight 0 > pcib0: slot 11 INTB routed to irq 9 via \\_SB_.PCI0.LUS2 > found-> vendor=0x10de, dev=0x0265, revid=0xa1 > bus=0, slot=13, func=0 > class=01-01-8a, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > powerspec 2 supports D0 D3 current D0 > map[20]: type 4, range 32, base 00003080, size 4, enabled > found-> vendor=0x10de, dev=0x0266, revid=0xa1 > bus=0, slot=14, func=0 > class=01-01-85, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=7 > powerspec 2 supports D0 D3 current D0 > MSI supports 4 messages, 64 bit > map[10]: type 4, range 32, base 000030b0, size 3, enabled > map[14]: type 4, range 32, base 000030a4, size 2, enabled > map[18]: type 4, range 32, base 000030a8, size 3, enabled > map[1c]: type 4, range 32, base 000030a0, size 2, enabled > map[20]: type 4, range 32, base 00003090, size 4, enabled > map[24]: type 1, range 32, base c0006000, size 12, memory disabled > pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LTID:0) > pcib0: slot 14 INTA routed to irq 7 via \\_SB_.PCI0.LTID > found-> vendor=0x10de, dev=0x026f, revid=0xa2 > bus=0, slot=16, func=0 > class=06-04-01, hdrtype=0x01, mfdev=1 > cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) > found-> vendor=0x10de, dev=0x026c, revid=0xa2 > bus=0, slot=16, func=1 > class=04-03-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) > intpin=b, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit, vector masks > map[10]: type 1, range 32, base c0000000, size 14, enabled > pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LAZA:0) > pcib0: slot 16 INTB routed to irq 11 via \\_SB_.PCI0.LAZA > found-> vendor=0x10de, dev=0x0269, revid=0xa3 > bus=0, slot=20, func=0 > class=06-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base c0007000, size 12, enabled > map[14]: type 4, range 32, base 000030b8, size 3, enabled > pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LMAC:0) > pci_link11: Picked IRQ 5 with weight 1 > pcib0: slot 20 INTA routed to irq 5 via \\_SB_.PCI0.LMAC > found-> vendor=0x1022, dev=0x1100, revid=0x00 > bus=0, slot=24, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > bus=0, slot=24, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > bus=0, slot=24, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > bus=0, slot=24, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > pci0: <memory, RAM> at device 0.0 (no driver attached) > pci0: <memory, RAM> at device 0.1 (no driver attached) > pci0: <memory, RAM> at device 0.2 (no driver attached) > pci0: <memory, RAM> at device 0.3 (no driver attached) > pci0: <memory, RAM> at device 0.4 (no driver attached) > pci0: <memory, RAM> at device 0.5 (no driver attached) > pci0: <memory, RAM> at device 0.6 (no driver attached) > pci0: <memory, RAM> at device 0.7 (no driver attached) > nvidia0: <GeForce Go 6100> mem 0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq 5 at device 5.0 on pci0 > nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xc2000000 > nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000 > nvidia0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xc1000000 > nvidia0: [GIANT-LOCKED] > pci0: <memory, RAM> at device 9.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 10.0 on pci0 > isa0: <ISA bus> on isab0 > nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0x3040-0x307f,0x3000-0x303f irq 7 at device 10.1 on pci0 > nfsmb0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040 > smbus0: <System Management Bus> on nfsmb0 > smb0: <SMBus generic I/O> on smbus0 > nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0 > nfsmb0: Reserved 0x40 bytes for rid 0x24 type 4 at 0x3000 > smbus1: <System Management Bus> on nfsmb1 > smb1: <SMBus generic I/O> on smbus1 > ohci0: <OHCI (generic) USB controller> mem 0xc0004000-0xc0004fff irq 11 at device 11.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0004000 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > usbd_get_string: getting lang failed, using 0 > uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 8 ports with 8 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0005000-0xc00050ff irq 9 at device 11.1 on pci0 > ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xc0005000 > ehci0: [GIANT-LOCKED] > usb1: EHCI version 1.0 > usb1: companion controller, 8 ports each: usb0 > usb1: <EHCI (generic) USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 > uhub1: 8 ports with 8 removable, self powered > usbd_new_device: addr=2, getting first desc failed > uhub_explore: usb_new_device failed, error=IOERROR > uhub1: device problem (IOERROR), disabling port 8 > atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080 > ata0: <ATA channel 0> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=00 ostat0=ff ostat1=ff > ata0: [MPSAFE] > ata1: <ATA channel 1> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=50 ostat1=01 > ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb > ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 > ata1: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER> > ata1: [MPSAFE] > atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x3090-0x309f mem 0xc0006000-0xc0006fff irq 7 at device 14.0 on pci0 > atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090 > atapci1: [MPSAFE] > atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc0006000 > ata2: <ATA channel 0> on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30b0 > atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30a4 > ata2: SATA connect ready time=0ms > ata2: sata_connect devices=0x1<ATA_MASTER> > ata2: [MPSAFE] > ata3: <ATA channel 1> on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30a8 > atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30a0 > ata3: SATA connect status=00000000 > ata3: [MPSAFE] > pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0 > pcib1: secondary bus 4 > pcib1: subordinate bus 5 > pcib1: I/O decode 0xf000-0xfff > pcib1: memory decode 0xc3000000-0xc30fffff > pcib1: prefetched decode 0xfff00000-0xfffff > pcib1: Subtractively decoded bridge. > ACPI: Found matching pin for 4.7.INTA at func 0: 10 > pci_link0: BIOS IRQ 10 for 4.7.INTA is invalid > ACPI: Found matching pin for 4.7.INTB at func 1: 11 > pci4: <ACPI PCI bus> on pcib1 > pci4: physical bus=4 > found-> vendor=0x1524, dev=0x1412, revid=0x10 > bus=4, slot=7, func=0 > class=06-07-00, hdrtype=0x02, mfdev=1 > cmdreg=0x0104, statreg=0x0210, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x44 (17000 ns), maxlat=0x03 (750 ns) > intpin=a, irq=10 > powerspec 1 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base c3000000, size 12, memory disabled > pcib1: (null) requested memory range 0xc3000000-0xc3000fff: good > pcib1: matched entry for 4.7.INTA (src \\_SB_.PCI0.LNK1:0) > pci_link0: Picked IRQ 9 with weight 1 > pcib1: slot 7 INTA routed to irq 9 via \\_SB_.PCI0.LNK1 > found-> vendor=0x1524, dev=0x0530, revid=0x01 > bus=4, slot=7, func=1 > class=05-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) > intpin=b, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base c3001000, size 7, enabled > pcib1: (null) requested memory range 0xc3001000-0xc300107f: good > pcib1: matched entry for 4.7.INTB (src \\_SB_.PCI0.LNK2:0) > pcib1: slot 7 INTB routed to irq 11 via \\_SB_.PCI0.LNK2 > found-> vendor=0x1524, dev=0x0550, revid=0x01 > bus=4, slot=7, func=2 > class=08-05-01, hdrtype=0x00, mfdev=1 > cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) > intpin=b, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base c3001400, size 8, enabled > pcib1: (null) requested memory range 0xc3001400-0xc30014ff: good > pcib1: matched entry for 4.7.INTB (src \\_SB_.PCI0.LNK2:0) > pcib1: slot 7 INTB routed to irq 11 via \\_SB_.PCI0.LNK2 > found-> vendor=0x1524, dev=0x0551, revid=0x01 > bus=4, slot=7, func=4 > class=05-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0104, statreg=0x0210, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) > intpin=b, irq=255 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base 00000000, size 8, memory disabled > cbb0: <PCI-CardBus Bridge> mem 0xc3000000-0xc3000fff irq 9 at device 7.0 on pci4 > cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc3000000 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [MPSAFE] > cbb0: PCI Configuration space: > 0x00: 0x14121524 0x02100107 0x06070010 0x00824010 > 0x10: 0xc3000000 0x020000a0 0x20050504 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc > 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440109 > 0x40: 0x54031558 0x00000001 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x0040d020 0x00000000 0x00000000 0x01d11222 > 0x90: 0x604400c0 0x00000000 0x00000000 0x00000000 > 0xa0: 0xfe010001 0x00c00000 0x00000018 0x00000007 > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00001003 0x00800080 0x10080700 0x000007fe > 0xd0: 0x00000020 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 > pci4: <memory, flash> at device 7.1 (no driver attached) > pci4: <base peripheral> at device 7.2 (no driver attached) > pci4: <memory, flash> at device 7.4 (no driver attached) > pci0: <multimedia> at device 16.1 (no driver attached) > nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 5 at device 20.0 on pci0 > nve0: nvenetlib.o version 1.0-13 > nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0007000 > nve0: Ethernet address 00:90:f5:4f:18:1b > miibus0: <MII bus> on nve0 > rlphy0: <RTL8201L 10/100 media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > nve0: bpf attached > nve0: Ethernet address: 00:90:f5:4f:18:1b > nve0: [MPSAFE] > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz0: _CRT value is absurd, ignored (154.8C) > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: unable to allocate IRQ > psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 > psm0: current command byte:0047 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3-00, 3 buttons > psm0: config:00000000, flags:00000008, packet size:4 > psm0: syncmask:08, syncbits:00 > sio0: irq maps: 0xe01 0xe11 0xe01 0xe01 > sio0: irq maps: 0xe01 0xe11 0xe01 0xe01 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio0: [FAST] > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > sio: sio0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xd07ff pnpid ORM0000 on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > fe0: not probed (disabled) > ie0: not probed (disabled) > le0: not probed (disabled) > ppc0 failed to probe at irq 7 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0xe01 0xe01 0xe01 0xe01 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 1607325121 Hz quality 800 > Timecounters tick every 1.000 msec > Linux ELF exec handler installed > lo0: bpf attached > acpi_tz0: _CRT value is absurd, ignored (154.8C) > acpi_acad0: acline initialization start > acpi_acad0: On Line > acpi_acad0: acline initialization done, tried 1 times > battery0: battery initialization start > battery0: battery initialization done, tried 1 times > ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > acd0: setting PIO4 on nForce MCP51 chip > acd0: setting UDMA33 on nForce MCP51 chip > acd0: <TSSTcorpCD/DVDW SN-S082D/SS00> DVDR drive at ata1 as master > acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire > ad4: 76319MB <FUJITSU MHV2080BH 00000028> at ata2-master SATA150 > ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue > GEOM: new disk ad4 > ad4: nVidia check1 failed > ad4: Adaptec check1 failed > ad4: LSI (v3) check1 failed > ad4: LSI (v2) check1 failed > ad4: FreeBSD check1 failed > ATA PseudoRAID loaded > Trying to mount root from ufs:/dev/ad4s1a > start_init: trying /sbin/init > linprocfs registered > acpi_tz0: _CRT value is absurd, ignored (154.8C) > acpi_tz0: _CRT value is absurd, ignored (154.8C) > usbd_new_device: addr=2, getting first desc failed > uhub_explore: usb_new_device failed, error=IOERROR > uhub1: device problem (IOERROR), disabling port 4 > > ------------------------------------------------------------------------ > > none0_at_pci0:0:0: class=0x050000 card=0x00000000 chip=0x02f310de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > none1_at_pci0:0:1: class=0x050000 card=0x00000000 chip=0x02fa10de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > none2_at_pci0:0:2: class=0x050000 card=0x00000000 chip=0x02fe10de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > none3_at_pci0:0:3: class=0x050000 card=0x00000000 chip=0x02f810de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > none4_at_pci0:0:4: class=0x050000 card=0x00000000 chip=0x02f910de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > none5_at_pci0:0:5: class=0x050000 card=0x00000000 chip=0x02ff10de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > none6_at_pci0:0:6: class=0x050000 card=0x00000000 chip=0x027f10de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > none7_at_pci0:0:7: class=0x050000 card=0x00000000 chip=0x027e10de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > nvidia0_at_pci0:5:0: class=0x030000 card=0x54031558 chip=0x024710de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = display > subclass = VGA > none8_at_pci0:9:0: class=0x050000 card=0xcb8410de chip=0x027010de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = memory > subclass = RAM > isab0_at_pci0:10:0: class=0x060100 card=0x54031558 chip=0x026010de rev=0xa3 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = bridge > subclass = PCI-ISA > nfsmb0_at_pci0:10:1: class=0x0c0500 card=0x54031558 chip=0x026410de rev=0xa3 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = serial bus > subclass = SMBus > ohci0_at_pci0:11:0: class=0x0c0310 card=0x54031558 chip=0x026d10de rev=0xa3 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = serial bus > subclass = USB > ehci0_at_pci0:11:1: class=0x0c0320 card=0x54031558 chip=0x026e10de rev=0xa3 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = serial bus > subclass = USB > atapci0_at_pci0:13:0: class=0x01018a card=0x54031558 chip=0x026510de rev=0xa1 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = mass storage > subclass = ATA > atapci1_at_pci0:14:0: class=0x010185 card=0x54031558 chip=0x026610de rev=0xa1 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = mass storage > subclass = ATA > pcib1_at_pci0:16:0: class=0x060401 card=0x000000b8 chip=0x026f10de rev=0xa2 hdr=0x01 > vendor = 'NVIDIA Corporation' > class = bridge > subclass = PCI-PCI > pcm0_at_pci0:16:1: class=0x040300 card=0x54031558 chip=0x026c10de rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = multimedia > nve0_at_pci0:20:0: class=0x068000 card=0x54031558 chip=0x026910de rev=0xa3 hdr=0x00 > vendor = 'NVIDIA Corporation' > class = bridge > hostb0_at_pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon 64 / Opteron HyperTransport Technology Configuration' > class = bridge > subclass = HOST-PCI > hostb1_at_pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon 64 / Opteron Address Map' > class = bridge > subclass = HOST-PCI > hostb2_at_pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon 64 / Opteron DRAM Controller' > class = bridge > subclass = HOST-PCI > hostb3_at_pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon 64 / Opteron Miscellaneous Control' > class = bridge > subclass = HOST-PCI > cbb0_at_pci4:7:0: class=0x060700 card=0x54031558 chip=0x14121524 rev=0x10 hdr=0x02 > vendor = 'ENE Technology Inc' > device = 'CB-712/714 CardBus Controller' > class = bridge > subclass = PCI-CardBus > none9_at_pci4:7:1: class=0x050100 card=0x54031558 chip=0x05301524 rev=0x01 hdr=0x00 > vendor = 'ENE Technology Inc' > class = memory > subclass = flash > none10_at_pci4:7:2: class=0x080501 card=0x54031558 chip=0x05501524 rev=0x01 hdr=0x00 > vendor = 'ENE Technology Inc' > class = base peripheral > none11_at_pci4:7:4: class=0x050100 card=0x54031558 chip=0x05511524 rev=0x01 hdr=0x00 > vendor = 'ENE Technology Inc' > class = memory > subclass = flash > > ------------------------------------------------------------------------ > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" I have the same problem, I reported it earlier but none seemed to have any clue. I'm running freebsd-current and an Asus MN2PV-VM (Nforce430+GeForce 6150 integrated chipset) BrunoReceived on Sun Sep 24 2006 - 13:36:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:00 UTC