On 4/12/07, Dag-Erling Smørgrav <des_at_des.no> wrote: > "Joao Barros" <joao.barros_at_gmail.com> writes: > > The aim is to disconnect the ATA ad0 thus rendering the SATA ad2 to > > ad0, something like this: > > > > ATA channel 0: > > Master: ad0 <WDC WD3200KS-00PFB0/21.00M21> Serial ATA II > > Slave: ad1 <ST3320620AS/3.AAJ> Serial ATA II > > ATA channel 1: > > Master: ad2 <ST3320620AS/3.AAK> Serial ATA II > > Slave: no device present > > ATA channel 2: > > Master: ad4 <ST3320620AS/3.AAK> Serial ATA II > > Slave: no device present > > > > The problem is that the info in zpool.cache is diferent from the new > > disk order and zfs doesn't pick the volume thus no root fs. > > I jumped on my "let's go for anything" suit and even tried to edit > > zpool.cache by hand with the new disk order, sadly with no luck. > > Run "zpool export" before moving the disks, then "zpool import" after > rebooting. I can export the zpool when I'm running off the ATA ad0 but I can't import from the SATA ad0, the root fs is on zfs... -- Joao BarrosReceived on Thu Apr 12 2007 - 19:16:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:08 UTC