> > I thought we had this problem fixed a long time ago: > > brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 > [...] > bge0: link state changed to DOWN > bge0: no link .....bge0: link state changed to UP > got link > DHCPREQUEST on bge0 to 255.255.255.255 port 67 > DHCPREQUEST on bge0 to 255.255.255.255 port 67 > DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 5 > DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 13 > DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 20 > DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 14 > DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 9 > No DHCPOFFERS received. > > Unless and until a (broadcast) packet is received, the bge interface > does not work. > > If I trigger a broadcast on the network while dhclient is running, > it jumps into action and starts working. I have something similar, and only if console is also serial, then bge is stuck until I hit any key on the serial console! it seems some interrup miss problem to me. dannyReceived on Tue Apr 17 2007 - 09:11:58 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:08 UTC