Re: intsmb fails to attach

From: John Baldwin <jhb_at_freebsd.org>
Date: Wed, 18 Apr 2007 17:19:56 -0400
On Sunday 01 April 2007 16:49, Ulrich Spoerlein wrote:
> Hi,
> 
> I just upgraded my oldish ASUS P2B machine to current, and noticed
> intsmb0 failing to attach. It's not that I need it, but perhaps the
> problem is more wide spread:

Did it work before?

> intsmb0: <Intel PIIX4 SMBUS Interface> port 0xe800-0xe80f at device 4.3 on pci0
> intsmb0: intr IRQ 9 enabled revision 0
> intsmb0: Unsupported interrupt mode
> device_attach: intsmb0 attach returned 6
> 
> intsmb0_at_pci0:4:3:       class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
>     class      = bridge
> 
> Any stuff I should try?
> 
> There are also some ACPI reservations failing, but as this is an old
> board, I think this is to be expected:
> 
> ACPI: RSDP _at_ 0x0xf7f80/0x0014 (v  0 ASUS  )
> ACPI: RSDT _at_ 0x0x13ffd000/0x002C (v  1 ASUS   P2B      0x42302E31 MSFT 0x31313031)
> ACPI: FACP _at_ 0x0x13ffd080/0x0074 (v  1 ASUS   P2B      0x42302E31 MSFT 0x31313031)
> ACPI: DSDT _at_ 0x0x13ffd100/0x1BA8 (v  1   ASUS P2B      0x00001000 MSFT 0x01000001)
> ACPI: FACS _at_ 0x0x13fff000/0x0040
> ACPI: BOOT _at_ 0x0x13ffd040/0x0028 (v  1 ASUS   P2B      0x42302E31 MSFT 0x31313031)
> acpi0: <ASUS P2B> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 13f00000 (3) failed
> 
> Ulrich Spoerlein

-- 
John Baldwin
Received on Wed Apr 18 2007 - 22:48:12 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:08 UTC