On Wednesday, 25 April 2007 at 13:22:13 +0200, Fabian Keil wrote: > Randall Stewart <rrs_at_cisco.com> wrote: > > > I have begun having difficulty with my DVD-backup that happens > > every night. > > > > It WAS working.. but now I am seeing (on creating my initial backup): > > *************************************************************** > > bash-lakerest.net: growisofs -Z /dev/cd0 -R -J backup_init.04-24-2007.gz > > Executing 'mkisofs -R -J backup_init.04-24-2007.gz | builtin_dd > > of=/dev/pass0 obs=32k seek=0' > > 1.49% done, estimate finish Wed Apr 25 06:49:25 2007 > > > 99.60% done, estimate finish Wed Apr 25 06:50:20 2007 > > Total translation table size: 0 > > Total rockridge attributes bytes: 266 > > Total directory bytes: 0 > > Path table size(bytes): 10 > > Max brk space used 3440e4 > > 336353 extents written (656 MB) > > builtin_dd: 336368*2KB out _at_ average 5.8x1385KBps > > /dev/pass0: flushing cache > > :-( unable to TEST UNIT READY: Input/output error > > :-[ SYNCHRONOUS FLUSH CACHE failed with SK=2h/ASC=04h/ACQ=07h]: Resource > > temporarily unavailable > > ********************************************************** > > And on the console while its progressing: > > ********************************************************** > > acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 as=0x00 > > acd0: FAILURE - unknown CMD (0x03) HARDWARE ERROR asc=0x08 ascq=0x01 > > acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x21 ascq=0x02 > > ********************************************************** > > When I try to "append" to the DVD: > > ********************************************************** > > :-( unable to pread64(2) primary volume descriptor: Input/output error > > you most likely want to use -Z option. > > backup complete Tue Apr 24 01:03:45 EDT 2007 > > ********************************************************** > > > > Now I would chalk this off to just a hardware failure (since it was > > working).. But when I try this on another machine that happens > > to have a DVD write... I get all the nice messages.. it completes > > with no errors .. and I can't mount the drive :-( > > > > The drive that errors is a SONY.. > > 'SONY ' 'DVD RW DRU-820A ' '1.0a' Removable CD-ROM > > > > On a 7.0 current machine. > > > > The one that does not error but does not let me mount things is: > > > > 'GENERIC ' 'DVD RW 8XMax ' '140I' Removable CD-ROM > > > > On a 6.2 machine. > > > > Now it could be that both have failed.. my office is in > > a barn.. but it just seems strange to me . > > > > > > As anyone else seen these types of errors? should I just > > replace the drives? > > I saw similar looking failure messages a few days ago with > cdrecord (burning DVDs) and if I remember correctly with > readcd as well (checking the burned discs). > > The created discs were OK though and I don't burn > that much, so the error messages might not be new. > > The drive is a LiteOn SOHW-1693S. > > Fabian It's probably not related to this but i have 100% reproducable reboots (without any panics) every time i am starting k3b-1.0_1. I am using cdrtools-2.01_5 quetzal_at_orion:~> uname -a FreeBSD orion.zone3000.net 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Tue Apr 24 03:36:01 EEST 2007 root_at_orion.zone3000.net:/usr/obj/usr/src/sys/GENERIC i386 quetzal_at_orion:~> pciconf -vl <441> hostb0_at_pci0:0:0: class=0x060000 card=0x01c91028 chip=0x25908086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915PM/GM/GMS, 82910GML Host Bridge' class = bridge subclass = HOST-PCI vgapci0_at_pci0:2:0: class=0x030000 card=0x01c91028 chip=0x25928086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915GM/GMS, 82910GML Integrated Graphics Device' class = display subclass = VGA vgapci1_at_pci0:2:1: class=0x038000 card=0x01c91028 chip=0x27928086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915GM/GMS,82910GML Mobile Express Family Graphics Controller (??)' class = display pcm0_at_pci0:27:0: class=0x040300 card=0x01c91028 chip=0x26688086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '8181104 Intel High Definition Audio Controllers' class = multimedia pcib1_at_pci0:28:0: class=0x060400 card=0x00000000 chip=0x26608086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82801FB (ICH6) PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib2_at_pci0:28:3: class=0x060400 card=0x00000000 chip=0x26668086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82801FB (ICH6) PCI Express Root Port 4' class = bridge subclass = PCI-PCI uhci0_at_pci0:29:0: class=0x0c0300 card=0x01c91028 chip=0x26588086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB uhci1_at_pci0:29:1: class=0x0c0300 card=0x01c91028 chip=0x26598086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB uhci2_at_pci0:29:2: class=0x0c0300 card=0x01c91028 chip=0x265a8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB uhci3_at_pci0:29:3: class=0x0c0300 card=0x01c91028 chip=0x265b8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB ehci0_at_pci0:29:7: class=0x0c0320 card=0x01c91028 chip=0x265c8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller' class = serial bus subclass = USB pcib3_at_pci0:30:0: class=0x060401 card=0x01c91028 chip=0x24488086 rev=0xd3 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0_at_pci0:31:0: class=0x060100 card=0x01c91028 chip=0x26418086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FBM LPC Interface Bridge (ICH6-M)' class = bridge subclass = PCI-ISA atapci0_at_pci0:31:1: class=0x01018a card=0x01c91028 chip=0x266f8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FBM Ultra ATA Storage Controllers - 266F' class = mass storage subclass = ATA bfe0_at_pci2:0:0: class=0x020000 card=0x01c91028 chip=0x170c14e4 rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM440x 100Base-TX Fast Ethernet' class = network subclass = ethernet ndis0_at_pci2:3:0: class=0x028000 card=0x00051028 chip=0x431914e4 rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' device = 'Dell Wireless 1470 DualBand WLAN' class = network quetzal_at_orion:~> cat /boot/loader.conf autoboot_delay="3" verbose_loading="YES" snd_hda_load="YES" atapicam_load="YES" usd_load="YES" i915_load="YES" drm_load="YES" bcmwl5_sys_load="YES" wlan_xauth_load="YES" umodem_load="YES" geom_journal_load="YES" -- ====================================================================== - Best regards, Nikolay Pavlov. <<<----------------------------------- ======================================================================Received on Wed Apr 25 2007 - 15:18:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:09 UTC