Louis Kowolowski wrote: > On Thu, Aug 02, 2007 at 03:01:46PM -0700, David Wolfskill wrote: >> On Thu, Aug 02, 2007 at 02:55:55PM -0700, Julian Elischer wrote: >>> ... >>>> Err... yeah; not sure how else I'd actually run the kernel I just built. >>> I have to push the power button to get it to shutdown and then re-power it >>> up. >>> otherwise it just sits in the old kernel forever.. >> Ugh. Sympathy, but that's not one of the problems I have. Both >> "reboot" and "halt -p" do the expected (and documented) things. In each >> of CURRENT & STABLE. >> >> Offhand, I'd suspect ACPI (in which I am decidedly not well-versed). >> > I have the same issue(s) with RELENG_6, but things work properly in > -CURRENT. rebooting has come and gone for me each upgrade seems to have a random chance of working or not.. sometimes halt -p even works.. :-) > > I'm using a Thinkpad T60p: > > FreeBSD localhost 6.2-STABLE FreeBSD 6.2-STABLE #0: Tue Jul 31 10:15:32 PDT 2007 root_at_localhost:/usr/obj/usr/src/sys/MONTEZUMA i386 > > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-STABLE #0: Tue Jul 31 10:15:32 PDT 2007 > root_at_localhost:/usr/obj/usr/src/sys/MONTEZUMA > WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant > WARNING: MPSAFE network stack disabled, expect reduced performance. > acpi_alloc_wakeup_handler: can't alloc wake memory > ACPI APIC Table: <LENOVO TP-79 > > Timecounter "i8254" frequency 1193193 Hz quality 0 > CPU: Genuine Intel(R) CPU T2600 _at_ 2.16GHz (2161.29-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 > Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>> > AMD Features=0x100000<NX> > Cores per package: 2 > real memory = 3219980288 (3070 MB) > avail memory = 3145674752 (2999 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > Security auditing service present > BSM auditing present > ioapic0: Changing APIC ID to 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > kqemu version 0x00010300 > kqemu: KQEMU installed, max_locked_mem=1565832kB. > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <LENOVO TP-79> on motherboard > acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 2000 > acpi0: Power Button (fixed) > acpi0: reservation of fec00000, 140000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pcm0: <Intel 82801G High Definition Audio Controller> mem 0xee400000-0xee403fff irq 17 at device 27.0 on pci0 > pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3000-0x301f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2 > em0: Ethernet address: 00:16:41:58:25:48 > em0: [GIANT-LOCKED] > pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib3 > ath0: <Atheros 5212> mem 0xedf00000-0xedf0ffff irq 17 at device 0.0 on pci3 > ath0: [GIANT-LOCKED] > ath0: Ethernet address: 00:16:cf:7b:0d:0d > ath0: mac 10.3 phy 6.1 radio 10.2 > pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 > pci12: <ACPI PCI bus> on pcib5 > uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee404000-0xee4043ff irq 19 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci21: <ACPI PCI bus> on pcib6 > cbb0: <TI1510 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device 0.0 on pci21 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > atapci1: <Intel ICH7M SATA300 controller> port 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem 0xee404400-0xee4047ff irq 16 at device 31.2 on pci0 > atapci1: AHCI Version 01.10 controller with 4 ports detected > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > ata4: <ATA channel 2> on atapci1 > ata5: <ATA channel 3> on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > speaker0: <PC speaker> port 0x61 on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > sio0: configured irq 3 not in bitmap of probed irqs 0 > sio0: port may not be enabled > battery0: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 > sio0: configured irq 3 not in bitmap of probed irqs 0 > sio0: port may not be enabled > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ugen0: Broadcom Corp BCM2045B, rev 2.00/1.00, addr 2 > ugen1: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 3 > NULL mp in getnewvnode() > Timecounters tick every 1.000 msec > IPsec: Initialized Security Association Processing. > ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 10 packets/entry by default > ad4: 95396MB <Seagate ST910021AS 4.06> at ata2-master SATA150 > pcm0: <HDA Codec: Analog Devices AD1981HD> > pcm0: <HDA Driver Revision: 20070710_0047> > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad4s1a > >Received on Fri Aug 03 2007 - 01:45:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:15 UTC