I compiled yesterday's kernel without problems, and it restarted fine. I applied jeff roberson's ulehtt.diff (P4 with hyperthreading and 2GB RAM here) and disabled all kernel debugging (I was testing performance) Earlier this morning I was portupgrading and everything start to fail. One of the (random) panics was: [...] SHA256 Checksum OK for ghostscript/gdechl12.c. start = 0, len = 2930, fs = /usr panic: ffs_alloccg: map corrupted cpuid = 0 Uptime: 21m 10s Physical memory: 2035 MB Dumping 276 MB and now the boot is not so clean (I have highlited the cores and one PCI Express error, look for the ^^^ near the bottom). I've restored the old kernel and the panics have stopped and now the daemons start fine again. I'll try to compile a new kernel with debugging this afternoon. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #1: Sat Aug 4 11:20:33 CEST 2007 root_at_cycorp.molino:/usr/obj/usr/src/sys/7.agosto module_register: module pci/ichss_pci already exists! Module pci/ichss_pci failed to register: 17 module_register: module cpu/ichss already exists! Module cpu/ichss failed to register: 17 module_register: module cpu/powernow already exists! Module cpu/powernow failed to register: 17 module_register: module cpu/est already exists! Module cpu/est failed to register: 17 module_register: module cpu/p4tcc already exists! Module cpu/p4tcc failed to register: 17 ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3010.69-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff<FPU,VME,DE ,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR> AMD Features=0x20000800<SYSCALL,LM> Logical CPUs per core: 2 usable memory = 2134102016 (2035 MB) avail memory = 2059386880 (1963 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMXSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 8D, should be 80 [20070320] est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [SSDT] - C9, should be CF [20070320] est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci4: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0 xcffe0000-0xcffeffff irq 16 at device 0.0 on pci4 vgapci1: <VGA-compatible display> mem 0xcfff0000-0xcfffffff at device 0.1 on pci 4 pcm0: <Intel 82801F High Definition Audio Controller> mem 0xcfdf4000-0xcfdf7fff irq 16 at device 27.0 on pci0 pcm0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib3 mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xcfefc00 0-0xcfefffff irq 17 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0 msk0: Ethernet address: 00:13:d4:55:ab:62 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [FILTER] uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x8000-0x801f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x8400-0x841f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x8800-0x881f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x9000-0x901f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xcfdff800-0xcfdffbff irq 2 3 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 6,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel ICH6 SATA150 controller> port 0xa800-0xa807,0xa400-0xa403,0xa000 -0xa007,0x9800-0x9803,0x9400-0x940f mem 0xcfdffc00-0xcfdfffff irq 19 at device 3 1.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model MouseMan+, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 76319MB <Seagate ST380021A 3.19> at ata0-master UDMA100 acd0: DVDR <HL-DT-ST DVDRAM GSA-H10N/JL10> at ata0-slave UDMA33 ad4: 194481MB <Maxtor 6L200S0 BANC1G10> at ata2-master SATA150 pcm0: <HDA Codec: Realtek ALC880> pcm0: <HDA Driver Revision: 20070710_0047> SMP: AP CPU #1 Launched! GEOM_LABEL: Label for provider ad0s1 is msdosfs/POI. GEOM_LABEL: Label for provider ad0s2 is msdosfs/COZASH. Trying to mount root from ufs:/dev/ad4s3a WARNING: / was not properly dismounted Loading configuration files. kernel dumps on /dev/ad4s3b Entropy harvesting: interrupts ethernet point_to_point kickstart. swapon: adding /dev/ad4s3b as swap device Starting file system checks: /dev/ad4s3a: 2286 files, 90141 used, 163674 free (914 frags, 20345 blocks, 0.4% fragmentation) /dev/ad4s3e: DEFER FOR BACKGROUND CHECKING /dev/ad4s3f: DEFER FOR BACKGROUND CHECKING /dev/ad4s3d: DEFER FOR BACKGROUND CHECKING Setting hostuuid: 58a55b8b-9e0a-da11-a01e-5071b78b3c18. Setting hostid: 0x91b872b6. Mounting local file systems:WARNING: /tmp was not properly dismounted /tmp: mount pending error: blocks 4 files 1 WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 0 files 34 WARNING: /var was not properly dismounted /var: mount pending error: blocks 4 files 1 GEOM_LABEL: Label msdosfs/POI removed. Setting hostname: cycorp.molino. net.inet6.ip6.auto_linklocal: 1 -> 0 vfs.usermount: 0 -> 1 mskc0: Uncorrectable PCI Express error ^^^^^^^^^^^^^^^^^^^^^^^^ msk0: link state changed to DOWN lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether 00:13:d4:55:ab:62 inet 172.26.0.3 netmask 0xfffffff0 broadcast 172.26.0.15 media: Ethernet autoselect (none) status: no carrier add net default: gateway 172.26.0.1 Additional routing options:. Starting devd. hw.acpi.cpu.cx_lowest: C1 -> C1 Additional IP options:. Mounting NFS file systems:msk0: link state changed to UP . ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/c ompat/pkg /usr/local/lib/compat/pkg /usr/local/lib/gcc-4.2.1 /usr/local/lib/kde3 /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/pth 32-bit compatibility ldconfig path: /usr/lib32 Clearing /tmp (X related). Creating and/or trimming log files:. Starting syslogd. Checking for core dump on /dev/ad4s3b... savecore: no dumps found Initial amd64 initialization:. Additional ABI support:. NFS access cache time=60 Recovering vi editor sessions:. Starting local daemons:. Updating motd. Mounting late file systems:mount_msdosfs: /dev/da0s1: : No such file or directory Starting powerd. Removing stale Samba tdb files: done Starting slim. Starting dbus. Starting polkitd. Segmentation fault (core dumped) ^^^^^^^^^^^^^^^^^^^^^^^^ Starting hald. Segmentation fault (core dumped) ^^^^^^^^^^^^^^^^^^^^^^^^ Configuring syscons: keymap font8x16 font8x14 font8x8 blanktime. Starting cron. Local package initialization: rtc. Starting default moused:. Starting background file system checks in 60 seconds.Received on Sun Aug 05 2007 - 08:56:41 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:15 UTC