Re: Reboot on "shutdown -r" hangs after final "uptime ..." string

Bruce Cran wrote:
> Thomas Sparrevohn wrote:
>> I have the same problem - just as a test try to load a kernel without 
>> any USB drivers at all
>> And shutdown - on my machine it the ACPI part works - however the 
>> system hangs during the device Shutdown phase - this machine is a dell 
>> as well - would be nice if somebody using other than dell has the problem
>>   
> I'm running 7.0-CURRENT and am seeing the same problem on my Dell 
> Inspiron 1501 amd64 laptop.  This machine has OHCI and EHCI controllers; 
> removing the EHCI driver solves the problem and allows the computer to 
> reboot properly.  I initially thought it was an ACPI problem but now I'm 
> not so sure - is there anything I can do to help debug it?  I've added 
> printfs to kern_shutdown.c and as far as I can see the last function to 
> be called is shutdown_wait; since that doesn't do anything I know more 
> is going on, but I don't know where to look.

I have the same problem on my Dell inspiron 7500.
it HAS worked in the past. It has even powered down in the past when asked.
but now it just hangs.. I suspect that acpi may have something to do with it.

No idea where to look though.

> 
> -- 
> Bruce Cran
> 
>>  
>>> -----Original Message-----
>>> From: owner-freebsd-acpi_at_freebsd.org [mailto:owner-freebsd-
>>> acpi_at_freebsd.org] On Behalf Of Artem Naluzhny
>>> Sent: 15 May 2007 21:54
>>> To: acpi_at_freebsd.org
>>> Subject: Reboot on "shutdown -r" hangs after final "uptime ..." string
>>>
>>> Hi
>>>
>>> I played with different combinations of debug.acpi.do_powerstate,
>>> hw.acpi.disable_on_reboot and hw.acpi.handle_reboot sysctls on my
>>> Inspiron 1501 notebook without success. Environment:
>>>
>>> FreeBSD 7.0-CURRENT #1: Thu May 10 21:22:20 EEST 2007
>>>     root_at_tut.intra:/usr/obj/usr/src/sys/TUT
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc082b000.
>>> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082b1c4.
>>> Calibrating clock(s) ... i8254 clock: 1193176 Hz
>>> CLK_USE_I8254_CALIBRATION not specified - using default frequency
>>> Timecounter "i8254" frequency 1193182 Hz quality 0
>>> Calibrating TSC clock ... TSC clock: 1596011252 Hz
>>> CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz 686-
>>> class CPU)
>>>   Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
>>>
>>> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
>>> E,MCA,CMOV,PAT,PSE36,CLFLU
>>> SH,MMX,FXSR,SSE,SSE2,HTT>
>>>   Features2=0x2001<SSE3,CX16>
>>>   AMD
>>> Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
>>>   AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
>>> HTT bit cleared - FreeBSD does not have licensing issues requiring it.
>>>
>>>   Cores per package: 2
>>> Data TLB: 32 entries, fully associative
>>> Instruction TLB: 32 entries, fully associative
>>> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>>> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
>>> associative
>>> L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way
>>> associative
>>> real memory  = 937885696 (894 MB)
>>> Physical memory chunk(s):
>>> 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
>>> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>>> 0x0000000000c28000 - 0x0000000036e6ffff, 908361728 bytes (221768 pages)
>>> avail memory = 908304384 (866 MB)
>>> Table 'FACP' at 0x37e7fb9a
>>> Table 'TCPA' at 0x37e7fc0e
>>> Table 'SSDT' at 0x37e7fc40
>>> Table 'APIC' at 0x37e7fdc2
>>> MADT: Found table at 0x37e7fdc2
>>> MP Configuration Table version 1.4 found at 0xc009e171
>>> APIC: Using the MADT enumerator.
>>> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
>>> SMP: Added CPU 0 (AP)
>>> MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
>>> SMP: Added CPU 1 (AP)
>>> ACPI APIC Table: <PTLTD          APIC  >
>>> INTR: Adding local APIC 1 as a target
>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>>>  cpu0 (BSP): APIC ID:  0
>>>  cpu1 (AP): APIC ID:  1
>>> bios32: Found BIOS32 Service Directory header at 0xc00f84a0
>>> bios32: Entry = 0xfdc84 (c00fdc84)  Rev = 0  Len = 1
>>> pcibios: PCI BIOS entry at 0xfdc80+0x0
>>> pnpbios: Found PnP BIOS data at 0xc00f8540
>>> pnpbios: Entry = e5d0:9499  Rev = 1.0
>>> Other BIOS signatures found:
>>> APIC: CPU 0 has ACPI ID 0
>>> APIC: CPU 1 has ACPI ID 1
>>> ACPI: RSDP _at_ 0x0xf8500/0x0014 (v  0 PTLTD )
>>> ACPI: RSDT _at_ 0x0x37e79578/0x0040 (v  1 DELL    M08     0x06040000  LTP
>>> 0x00000000)
>>> ACPI: FACP _at_ 0x0x37e7fb9a/0x0074 (v  1 ATI    Bowfin   0x06040000 ATI
>>> 0x000F4240)
>>> ACPI: DSDT _at_ 0x0x37e795b8/0x65E2 (v  1    ATI    SB600 0x06040000 MSFT
>>> 0x03000000)
>>> ACPI: FACS _at_ 0x0x37e90fc0/0x0040
>>> ACPI: TCPA _at_ 0x0x37e7fc0e/0x0032 (v  2 AMD             0x06040000 PTEC
>>> 0x00000000)
>>> ACPI: SSDT _at_ 0x0x37e7fc40/0x0182 (v  1 PTLTD  POWERNOW 0x06040000  LTP
>>> 0x00000001)
>>> ACPI: APIC _at_ 0x0x37e7fdc2/0x0054 (v  1 PTLTD     APIC   0x06040000
>>> LTP 0x00000000)
>>> ACPI: MCFG _at_ 0x0x37e7fe16/0x003C (v  1 PTLTD    MCFG   0x06040000  LTP
>>> 0x00000000)
>>> ACPI: HPET _at_ 0x0x37e7fe52/0x0038 (v  1 PTLTD  HPETTBL  0x06040000  LTP
>>> 0x00000001)
>>> ACPI: SLIC _at_ 0x0x37e7fe8a/0x0176 (v  1 DELL    M08     0x06040000  LTP
>>> 0x00000000)
>>> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>>> ioapic0: Routing external 8259A's -> intpin 0
>>> lapic0: Routing NMI -> LINT1
>>> lapic0: LINT1 trigger: edge
>>> lapic0: LINT1 polarity: high
>>> lapic1: Routing NMI -> LINT1
>>> lapic1: LINT1 trigger: edge
>>> lapic1: LINT1 polarity: high
>>> MADT: Forcing active-low polarity and level trigger for SCI
>>> ioapic0: intpin 9 polarity: low
>>> ioapic0: intpin 9 trigger: level
>>> ioapic0 <Version 2.1> irqs 0-23 on motherboard
>>> cpu0 BSP:
>>>      ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>>>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>>>   timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
>>> io: <I/O>
>>> null: <null device, zero device>
>>> random: <entropy source, Software, Yarrow>
>>> kbd: new array size 4
>>> kbd1 at kbdmux0
>>> mem: <memory>
>>> Pentium Pro MTRR support enabled
>>> npx0: INT 16 interface
>>> acpi0: <DELL M08    > on motherboard
>>> ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
>>> acpi0: [MPSAFE]
>>> acpi0: [ITHREAD]
>>> pci_open(1):    mode 1 addr port (0x0cf8) is 0x80009020
>>> pci_open(1a):   mode1res=0x80000000 (0x80000000)
>>> pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=59501002)
>>> pcibios: BIOS_PRESENT call failed
>>> AcpiOsDerivePciId: bus 0 dev 18 func 0
>>> AcpiOsDerivePciId: bus 0 dev 17 func 0
>>> acpi0: Power Button (fixed)
>>> acpi0: wakeup code va 0xd5a40000 pa 0x9c000
>>> AcpiOsDerivePciId: bus 0 dev 20 func 1
>>> unknown: I/O range not supported
>>> AcpiOsDerivePciId: bus 0 dev 0 func 0
>>> AcpiOsDerivePciId: bus 0 dev 20 func 0
>>> acpi0: reservation of 0, 1000 (3) failed
>>> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
>>> acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0
>>>
>>>
>>> Any suggestions?
>>>
>>> -- 
>>> tut
>>> DaRK VoIP GuRU
>>> _______________________________________________
>>> freebsd-acpi_at_freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
>>> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe_at_freebsd.org"
>>>     
>>
>>   
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"