Re: console hangs after setting hostname

KOT MATPOCKuH wrote:
> I got a problem. After messages on console:
> ...
> Mounting local files systems:.
> Setting hostname: green.
> fxp: link state changed to UP
> nfe0: link state changed to DOWN
>
> console hangs.
> No any new messages, I can't input anything from keyboard, changing virtual
> consoles is not working. After X is started, console is not switched to xdm
> display.
> But system is works - I can login to system via ssh, ...
>
> dmesg.boot is attached.
>
> Where is a problem and what I need to do? :)
>   

I'm also seeing the console hang, but in a different situation.  If I 
attach and remove my iPod the console hangs - the only key press that's 
accepted is ctrl-alt-esc to break into the debugger.

umass0: <Apple iPod, class 0/0, rev 2.00/0.01, addr 2> on uhub5
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apple iPod 1.62> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 19073MB (39063024 512 byte sectors: 255H 63S/T 2431C)
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 2 54 d ef 0 0 1 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
(da0:umass-sim0:0:0:0): Logical block address out of range
(da0:umass-sim0:0:0:0): Unretryable error
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 2 54 d ef 0 0 1 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
(da0:umass-sim0:0:0:0): Logical block address out of range
(da0:umass-sim0:0:0:0): Unretryable error
GEOM_LABEL: Label for provider da0s2 is msdosfs/IPOD.

When I remove the iPod I get the following messages:

umass0: at uhub5 port 1 (addr 2) disconnected
da0:umass-sim0:0:0G:0EO :M _LlAoBst L d  ev aibceel
)m(sd ao0s:fs m/aIsPsO-Ds irme0m:o0v:ed :.0
 : removing device entry
umass0: detached

enter: manual escape to debugger
[thread pid 19 tid 100018 ]
Stopped at   kdb_enter+0x31: leave
db> wh
Tracing pid 19 tid 100018 td 0xffffff000112d350
kdb_enter()
scgetc()
sckbdevent()
kbdmux_intr()
kdbmux_kdb_intr()
taskqueue_run()
taskqueue_swi_giant_run()
ithread_loop
fork_exit()
fork_trampoline()
--- trap 0, rip = 0, rsp = 0xffffffff9ca59d30, rbp = 0 ---
db>

I'm using ULE.
uname -a:
FreeBSD muon.draftnet 7.0-CURRENT FreeBSD 7.0-CURRENT #1: Sat Aug 11 
21:07:09 BST 2007     
brucec_at_muon.draftnet:/usr/obj/usr/src/sys/INSPIRON  amd64

--
Bruce Cran