Re: nForce 430i doesn't recognise SATA devices

From: Andre Oppermann <andre_at_freebsd.org>
Date: Sat, 29 Dec 2007 12:36:38 +0100
Andrey V. Elsukov wrote:
> Andre Oppermann wrote:
>> FreeBSD 7.0BETA4 can't be installed on a NVIDIA nForce 650i SLI /
>> nForce 430i based ASUS P5N-E SLI board.  The nForce 430i south bridge
>> SATA ports are detected SATA devices do not get probed or detected.
>> It complains about timeouts and the device name is "unknown".
>> FreeBSD 6.3RC1 doesn't work either.
> 
> Hi, Andre
> 
> can you show a full verbose dmesg?

attached.

-- 
Andre

boot -v
/boot/kernel/acpi.ko text=0x51ff0 data=0x23a0+0x186c syms=[0x4+0x8570+0x4+0xaffe]
SMAP type=01 base=0000000000000000 len=000000000009f000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=02 base=00000000f0000000 len=0000000002000000
SMAP type=03 base=00000000efef3000 len=000000000000d000
SMAP type=04 base=00000000efef0000 len=0000000000003000
SMAP type=02 base=000000000009f000 len=0000000000001000
SMAP type=01 base=0000000000100000 len=00000000efdf0000
SMAP type=01 base=0000000100000000 len=0000000010000000
262144K of memory above 4GB ignored
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #0: Sun Dec  2 19:19:04 UTC 2007
    root_at_logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc1172000.
Preloaded mfs_root "/boot/mfsroot" at 0xc1172194.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc11721d8.
Calibrating clock(s) ... i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2399996592 Hz
CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  _at_ 2.40GHz (2400.00-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
real memory  = 4025417728 (3838 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001428000 - 0x00000000ebb16fff, 3933138944 bytes (960239 pages)
avail memory = 3932667904 (3750 MB)
Table 'FACP' at 0xefef9880
Table 'HPET' at 0xefef9ac0
Table 'MCFG' at 0xefef9b40
Table 'APIC' at 0xefef99c0
MADT: Found table at 0xefef99c0
MP Configuration Table version 1.4 found at 0xc00f1400
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 2: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
SMP: Added CPU 2 (AP)
ACPI APIC Table: <Nvidia ASUSACPI>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
bios32: Found BIOS32 Service Directory header at 0xc00fb430
bios32: Entry = 0xfba10 (c00fba10)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xba40
pnpbios: Found PnP BIOS data at 0xc00fc5e0
pnpbios: Entry = f0000:c610  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 2
ACPI: RSDP _at_ 0x0xf77c0/0x0024 (v  2 Nvidia)
ACPI: XSDT _at_ 0x0xefef30c0/0x0044 (v  1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000)
ACPI: FACP _at_ 0x0xefef9880/0x00F4 (v  3 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000)
ACPI: DSDT _at_ 0x0xefef3240/0x65D6 (v  1 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000)
ACPI: FACS _at_ 0x0xefef0000/0x0040
ACPI: HPET _at_ 0x0xefef9ac0/0x0038 (v  1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000098)
ACPI: MCFG _at_ 0x0xefef9b40/0x003C (v  1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000)
ACPI: APIC _at_ 0x0xefef99c0/0x0098 (v  1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Dec  2 2007 19:18:42)
npx0: INT 16 interface
acpi0: <Nvidia ASUSACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x800000c4
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=03a310de)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \_SB_.PCI0.SMB0.SMCA -> bus 0 dev 10 func 1
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xdb591000 pa 0x1000
AcpiOsDerivePciId: \_SB_.PCI0.BRCR -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.VT86.PIO1 -> bus 0 dev 10 func 0
AcpiOsDerivePciId: \_SB_.PCI0.VT86.PIRQ -> bus 0 dev 10 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, efdf0000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  5 7 9 10 11 14 15
  Validation          0   10   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 9 10 11 14 15
  Validation          0   11   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  5 7 9 10 11 14 15
  Validation          0   10   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5 7 9 10 11 14 15
  Validation          0    5   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 9 10 11 14 15
  Validation          0   11   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 9 10 11 14 15
  Validation          0   11   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 9 10 11 14 15
  Validation          0   11   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 9 10 11 14 15
  Validation          0  255   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link18:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 9 10 11 14 15
  Validation          0   11   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link19:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  5 7 9 10 11 14 15
  Validation          0   10   N     0  5 7 9 10 11 14 15
  After Disable       0  255   N     0  5 7 9 10 11 14 15
pci_link20:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16
  Validation          0  255   N     0  16
  After Disable       0  255   N     0  16
pci_link21:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  17
  Validation          0  255   N     0  17
  After Disable       0  255   N     0  17
pci_link22:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  18
  Validation          0  255   N     0  18
  After Disable       0  255   N     0  18
pci_link23:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  19
  Validation          0  255   N     0  19
  After Disable       0  255   N     0  19
pci_link24:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16
  Validation          0  255   N     0  16
  After Disable       0  255   N     0  16
pci_link25:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16
  Validation          0  255   N     0  16
  After Disable       0  255   N     0  16
pci_link26:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16
  Validation          0  255   N     0  16
  After Disable       0  255   N     0  16
pci_link27:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16
  Validation          0  255   N     0  16
  After Disable       0  255   N     0  16
pci_link28:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link29:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link30:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link31:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link32:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link33:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link34:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link35:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link36:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link37:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link38:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link39:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link40:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 7 hz: 25000000 opts: leg_route
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x10de, dev=0x03a3, revid=0xa2
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03ac, revid=0xa1
	domain=0, bus=0, slot=0, func=1
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03aa, revid=0xa1
	domain=0, bus=0, slot=0, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03a9, revid=0xa1
	domain=0, bus=0, slot=0, func=3
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03ab, revid=0xa1
	domain=0, bus=0, slot=0, func=4
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03a8, revid=0xa2
	domain=0, bus=0, slot=0, func=5
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0004, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03b5, revid=0xa1
	domain=0, bus=0, slot=0, func=6
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03b4, revid=0xa1
	domain=0, bus=0, slot=0, func=7
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03ad, revid=0xa1
	domain=0, bus=0, slot=1, func=0
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03ae, revid=0xa1
	domain=0, bus=0, slot=1, func=1
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03af, revid=0xa1
	domain=0, bus=0, slot=1, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03b0, revid=0xa1
	domain=0, bus=0, slot=1, func=3
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03b1, revid=0xa1
	domain=0, bus=0, slot=1, func=4
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03b2, revid=0xa1
	domain=0, bus=0, slot=1, func=5
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03b3, revid=0xa1
	domain=0, bus=0, slot=1, func=6
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03b6, revid=0xa1
	domain=0, bus=0, slot=2, func=0
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03bc, revid=0xa1
	domain=0, bus=0, slot=2, func=1
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03ba, revid=0xa1
	domain=0, bus=0, slot=2, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03bb, revid=0xa1
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x0270, revid=0xa2
	domain=0, bus=0, slot=9, func=0
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0260, revid=0xa3
	domain=0, bus=0, slot=10, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0264, revid=0xa3
	domain=0, bus=0, slot=10, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0x1c00, size  6, enabled
	map[24]: type I/O Port, range 32, base 0x1c80, size  6, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.APCS:0)
pci_link35: Picked IRQ 20 with weight 0
pcib0: slot 10 INTA routed to irq 20 via \_SB_.PCI0.APCS
found->	vendor=0x10de, dev=0x0272, revid=0xa3
	domain=0, bus=0, slot=10, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x026d, revid=0xa3
	domain=0, bus=0, slot=11, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.APCF:0)
pci_link28: Picked IRQ 21 with weight 0
pcib0: slot 11 INTA routed to irq 21 via \_SB_.PCI0.APCF
found->	vendor=0x10de, dev=0x026e, revid=0xa3
	domain=0, bus=0, slot=11, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe02e000, size  8, enabled
pcib0: matched entry for 0.11.INTB (src \_SB_.PCI0.APCL:0)
pci_link36: Picked IRQ 22 with weight 0
pcib0: slot 11 INTB routed to irq 22 via \_SB_.PCI0.APCL
found->	vendor=0x10de, dev=0x0265, revid=0xa1
	domain=0, bus=0, slot=13, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b8, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0xf400, size  4, enabled
found->	vendor=0x10de, dev=0x0266, revid=0xa1
	domain=0, bus=0, slot=14, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0x9f0, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xbf0, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x970, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xb70, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xe000, size  4, enabled
	map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled
pcib0: matched entry for 0.14.INTA (src \_SB_.PCI0.APSI:0)
pci_link39: Picked IRQ 23 with weight 0
pcib0: slot 14 INTA routed to irq 23 via \_SB_.PCI0.APSI
found->	vendor=0x10de, dev=0x0267, revid=0xa1
	domain=0, bus=0, slot=15, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0x9e0, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xbe0, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x960, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xb60, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xcc00, size  4, enabled
	map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled
pcib0: matched entry for 0.15.INTA (src \_SB_.PCI0.APSJ:0)
pci_link40: Picked IRQ 20 with weight 1
pcib0: slot 15 INTA routed to irq 20 via \_SB_.PCI0.APSJ
found->	vendor=0x10de, dev=0x026f, revid=0xa2
	domain=0, bus=0, slot=16, func=0
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x026c, revid=0xa2
	domain=0, bus=0, slot=16, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit, vector masks
	map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.AAZA:0)
pci_link33: Picked IRQ 21 with weight 1
pcib0: slot 16 INTB routed to irq 21 via \_SB_.PCI0.AAZA
found->	vendor=0x10de, dev=0x0269, revid=0xa3
	domain=0, bus=0, slot=20, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0xc800, size  3, enabled
pcib0: matched entry for 0.20.INTA (src \_SB_.PCI0.APCH:0)
pci_link30: Picked IRQ 22 with weight 1
pcib0: slot 20 INTA routed to irq 22 via \_SB_.PCI0.APCH
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
pci0: <memory, RAM> at device 2.1 (no driver attached)
pci0: <memory, RAM> at device 2.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0xafff
pcib1:   memory decode     0xfde00000-0xfdefffff
pcib1:   prefetched decode 0xfdd00000-0xfddfffff
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.XVRD - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x197b, dev=0x2360, revid=0x02
	domain=0, bus=1, slot=0, func=0
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xac00, size  3, enabled
pcib1: requested I/O range 0xac00-0xac07: in range
	map[14]: type I/O Port, range 32, base 0xa800, size  2, enabled
pcib1: requested I/O range 0xa800-0xa803: in range
	map[18]: type I/O Port, range 32, base 0xa400, size  3, enabled
pcib1: requested I/O range 0xa400-0xa407: in range
	map[1c]: type I/O Port, range 32, base 0xa000, size  2, enabled
pcib1: requested I/O range 0xa000-0xa003: in range
	map[20]: type I/O Port, range 32, base 0x9c00, size  4, enabled
pcib1: requested I/O range 0x9c00-0x9c0f: in range
	map[24]: type Memory, range 32, base 0xfdefe000, size 13, enabled
pcib1: requested memory range 0xfdefe000-0xfdefffff: good
pcib0: matched entry for 0.7.INTA (src \_SB_.PCI0.APC6:0)
pci_link25: Picked IRQ 16 with weight 0
pcib0: slot 7 INTA routed to irq 16 via \_SB_.PCI0.APC6
pcib1: slot 0 INTA is routed to irq 16
atapci0: <JMicron (ID=2360197b) AHCI controller> port 0xac00-0xac07,0xa800-0xa803,
0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c0f mem 0xfdefe000-0xfdefffff irq 16 at device 0.0 on pci1
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x9c00
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfdefe000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 1 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: ahci_reset devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 11.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci1: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf400
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci2: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000
ata3: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
ata4: SATA connect time=0ms
ata4: reset tp1 mask=01 ostat0=50 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata4: [MPSAFE]
ata4: [ITHREAD]
atapci3: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 20 at device 15.0 on pci0
atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 55
atapci3: [MPSAFE]
atapci3: [ITHREAD]
atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000
ata5: <ATA channel 0> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata6: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xb000-0xbfff
pcib2:   memory decode     0xf4000000-0xfbffffff
pcib2:   prefetched decode 0xfdf00000-0xfdffffff
pcib2:   Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x5333, dev=0x8901, revid=0x16
	domain=0, bus=2, slot=7, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[10]: type Memory, range 32, base 0xf4000000, size 26, enabled
pcib2: requested memory range 0xf4000000-0xf7ffffff: good
pcib2: matched entry for 2.7.INTA (src \_SB_.PCI0.APC2:0)
pci_link21: Picked IRQ 17 with weight 0
pcib2: slot 7 INTA routed to irq 17 via \_SB_.PCI0.APC2
vgapci0: <VGA-compatible display> mem 0xf4000000-0xf7ffffff irq 17 at device 7.0 on pci2
pci0: <multimedia> at device 16.1 (no driver attached)
nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xc800-0xc807 mem 0xfe02b000-0xfe02bfff irq 22 at device 20.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:1d:60:56:2d:a5
nfe0: [MPSAFE]
nfe0: [FILTER]
acpi_tz0: <Thermal Zone> on acpi0
sio0: irq maps: 0x4c21 0x4c31 0x4c21 0x4c21
sio0: irq maps: 0x4c21 0x4c31 0x4c21 0x4c21
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff,0xd0000-0xd1fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4c21 0x4c21 0x4c21 0x4c21
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 246455 -> 100000
procfs registered
lapic: Divisor 2, Frequency 133333155 hz
Timecounter "TSC" frequency 2399996592 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0cce260
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=58
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: reinit done ..
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=58
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: reinit done ..
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=58 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: reinit done ..
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=58 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: reinit done ..
ata3: reiniting channel ..
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: reinit done ..
ata3: reiniting channel ..
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: reinit done ..
ata4: reiniting channel ..
ata4: SATA connect time=0ms
ata4: reset tp1 mask=01 ostat0=58 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata4: reinit done ..
ata4: reiniting channel ..
ata4: SATA connect time=0ms
ata4: reset tp1 mask=01 ostat0=58 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata4: reinit done ..
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 7 to local APIC 2
ioapic0: Assigning ISA IRQ 9 to local APIC 3
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 2
ioapic0: Assigning PCI IRQ 20 to local APIC 3
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 2
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
/stand/sysinstal
Received on Sat Dec 29 2007 - 10:36:40 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:24 UTC