mfi and mpt question (LSI 8300XLP and SAS1068R)

From: Harald Schmalzbauer <h.schmalzbauer_at_omnisec.de>
Date: Fri, 02 Feb 2007 19:43:35 +0100
Dear all,

I have access to a new FujitsuSiemens Server with the LSI Controllers
mentioned in the topic (8300XLP, Zero-Channel-RAID and LSI MegaRAID
SAS1068R, 8-Channel SAS).
If I remove the 8300XLP I can access the drives by the mpt device, which
gives some errors with the 1068 card:
mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem
0xfd310000-0xfd313fff,0xfd300000-0xfd30ffff irq 25 at device 5.0 on pci5
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.12.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0xb
mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required).


Now regarding the 8300:

Is there a chance that this puppy is supported by the mfi driver?
If nobody tells me that it's unsupported I'd add the PCI id to mfi and
test it.

Best regards,

-Harry
Received on Fri Feb 02 2007 - 17:43:42 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:05 UTC