Re: envy24ht: M-Audio Revolution 5.1 broken (FreeBSD 7.0-CURRENT/AMD64)

Oliver, after mixer(8) can change the volume, that means the
snd_envy24ht can write to and control the DAC (AK4358) on the Revo 5.1
and so that silent sound is the maximum volume that the hardware
(Envy24GT+AK4358) can provide, because when do 'mixer vol 100', it set
the AK4358 to the maximum volume, 'mixer pcm' do nothing at the
moment, so when you do 'mixer pcm 0' or 'mixer pcm 100' nothing should
change.

i made new version, so when 'mixer pcm' is used, volume will be
changed in software and when 'mixer vol' is used, like before, volume
will be changed in hardware (in the DAC), i don't know how it will
behave, but as usual the new code is here:

http://envy24.svobodno.com/driver/envy24ht/current/envy24ht.c

and you can test it and report back the results ...

P.S.
Oliver, if you willing to help me gathering more info about the Revo
5.1 hardware, when i have more time for that i will mail you with some
instructions.

On 2/17/07, O. Hartmann <ohartman_at_mail.zedat.fu-berlin.de> wrote:
> Konstantin Dimitrov wrote:
> > you can't change the volume at all and no matter what value you use,
> > e.g. 0, 50, 100, always the same very silent sound going out or when
> > use 0 you can mute the sound, when you use 100 the sound is very
> > silent, but not as much silent as when you use 50 ?
> >
> > On 2/17/07, O. Hartmann <ohartman_at_mail.zedat.fu-berlin.de> wrote:
> >> Konstantin Dimitrov wrote:
> >> > Oliver, seems like the init data for Revo 5.1 are wrong, that is why
> >> > the sound is badly distorted, until now i haven't had access to Revo
> >> > 5.1 hardware for tests, so it's somehow expected problem, but with
> >> > several trials and errors we should be able to find the right init
> >> > data, so get the first slightly modified version from here:
> >> >
> >> > http://envy24.svobodno.com/driver/envy24ht/current/envy24ht.c
> >> >
> >> > rebuild and report back the result ...
> >> >
> >> > On 2/17/07, O. Hartmann <ohartman_at_mail.zedat.fu-berlin.de> wrote:
> >> >> Mr. Darren wrote:
> >> >> > Does anyone have this working at the moment?  I can't
> >> >> > seem to play any audio.  Can't open /dev/dsp0.0! and
> >> >> > so forth.
> >> >> > -Darren
> >> >> > %uname -a
> >> >> > FreeBSD DARREN 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Fri
> >> >> > Feb 16 22:40:32 UTC 2007
> >> >> > root_at_DARREN:/usr/obj/usr/src/sys/DARREN  amd64
> >> >> >
> >> >> > FreeBSD Audio Driver (newpcm: 64bit)
> >> >> > Installed devices:
> >> >> > pcm0: <Envy24 audio (M Audio Audiophile 2496)> at io
> >> >> > 0x9800:32,0x9400:16,0x9000:16,0x8c00:64 irq 18
> >> >> > (5p/3r/1v channels duplex default)
> >> >> > %ls /dev/dsp*
> >> >> > /dev/dsp0.0  /dev/dsp0.5  /dev/dsp0.p1 /dev/dsp0.r1
> >> >> > /dev/dspW0.2 /dev/dspW0.7
> >> >> > /dev/dsp0.1  /dev/dsp0.6  /dev/dsp0.p2 /dev/dsp0.r2
> >> >> > /dev/dspW0.3 /dev/dspW0.8
> >> >> > /dev/dsp0.2  /dev/dsp0.7  /dev/dsp0.p3 /dev/dsp0.v0
> >> >> > /dev/dspW0.4
> >> >> > /dev/dsp0.3  /dev/dsp0.8  /dev/dsp0.p4 /dev/dspW0.0
> >> >> > /dev/dspW0.5
> >> >> > /dev/dsp0.4  /dev/dsp0.p0 /dev/dsp0.r0 /dev/dspW0.1
> >> >> > /dev/dspW0.6
> >> >> > %ls /dev/audio*
> >> >> > /dev/audio0.0 /dev/audio0.2 /dev/audio0.4
> >> >> > /dev/audio0.6 /dev/audio0.8
> >> >> > /dev/audio0.1 /dev/audio0.3 /dev/audio0.5
> >> >> > /dev/audio0.7
> >> >> > %
> >> >> >
> >> >> >
> >> >> >
> >> >> >
> >> >>
> >> >> Just half an hour ago I got my new M-Audio Revolution 5.1:
> >> >>
> >> >> pcm0: <Envy24GT audio (M-Audio Revolution 5.1)> port
> >> >> 0xec00-0xec1f,0xe880-0xe8ff
> >> >>  irq 18 at device 8.0 on pci4
> >> >> pcm0: [GIANT-LOCKED]
> >> >> pcm0: system configuration
> >> >>   SubVendorID: 0x1412, SubDeviceID: 0x3631
> >> >>   XIN2 Clock Source: 49.152MHz(192kHz*256)
> >> >>   MPU-401 UART(s) #: not implemented
> >> >>   ADC #: 1
> >> >>   DAC #: 3
> >> >>   Multi-track converter type: I2S(with volume, 192KHz support, 24bit
> >> >> resolution,
> >> >>  ID#0x0)
> >> >>   S/PDIF(IN/OUT): 0/1 ID# 0x00
> >> >>   GPIO(mask/dir/state): 0x3fff85/0x4000fa/0x72
> >> >>
> >> >>
> >> >> Box is based on ASUS A8N32-SLI, AMD64 running FreeBSD
> >> 7.0-CURRENT/AMD64
> >> >> (no 32Bit compatibility), SCHED_ULE, PREEMPTION, driver snd_envy24ht
> >> >> hardwired into the kernel.
> >> >> I'm able to start sound playing via VLC or mplayer and I can hear
> >> >> something that sounds like the music I expected to hear but it is
> >> highly
> >> >> distorted and scrambled.
> >> >> After a while sound dies, comes back for a second and then disappear
> >> >> again ...
> >> >>
> >> >>
> >> >> Regards Oliver
> >> Hello Konstantin,
> >> I applied the patch - and it works, half the way. Sound is now playing
> >> undistorted, but it is very, very silent, I need the amplifier of my
> >> HiFi rack to amplify the sound input at a very high level.
> >> Changing volume via 'mixer' command doesn't help:
> >>
> >> hartmann: mixer
> >> Mixer vol      is currently set to 100:100
> >> Mixer treble   is currently set to   0:0
> >> Mixer synth    is currently set to   0:0
> >> Mixer pcm      is currently set to 100:100
> >> Mixer speaker  is currently set to   0:0
> >> Mixer line     is currently set to 100:100
> >> Mixer mic      is currently set to   0:0
> >> Mixer cd       is currently set to   0:0
> >> Mixer mix      is currently set to   0:0
> >>
> >>
> >> Every mixer-reachable instance is pumped up to 100%, the others, synth
> >> for example, aren't configured and return with a notice about that fact:
> >>
> >> hartmann: mixer synth 100
> >> Setting the mixer synth from 0:0 to 100:100.
> >> mixer: WRITE_MIXER: Device not configured
> >> hartmann: mixer vol 100
> >> Setting the mixer vol from 100:100 to 100:100.
> >> hartmann:
> >>
> >>
> >> Well, it is really impressive how fast you answered, thanks.
> >>
> >> Regards,
> >> Oliver
> >>
> Konstantin, the volume level is really silent compared to the output
> level of the onboard AC97 codec or the Creative Audigy SE/LS (with OSS
> driver, not working anymore in FreeBSD 7.0-CURRENT).
> My amplification facility of the HiFi equipment is set to half full
> amplification and normally this would blast my neighbour's ears ;-) But
> with the M-Audio Revo 5.1 it is just 'silent', just for smooth
> listening. It is definitely too silent.
> I can mute with 0 and half the volume by setting mixer/pcm/volume level
> to 50 or yield another percentage setting any value 0 < X <= 100, X for
> volume/percentage.
> I use the green outlet for my HiFi facility.
>
> If you expect me test anything for you, let me know.
>
> Regards,
> Oliver
>