first revision macbook pro

hello
i have a first revision macbook pro (core duo 2ghz, not core 2 duo!)
i have sort of a problem here
freebsd 6.2 and 7.0 current (5 feb.) don't really boot correctly
i get:
AP #1 (PHY# 1) failed!
panic y/n? [y]

sometimes i get around this problem if i press the power button in  
the exact right moment.
yesterday i built my own kernel without APIC and SMP support
at least now it boots 100% of the time
but i'd like to use both of my cores
network card doesn't work either...

here is the output of cpuid

  eax in eax ebx ecx edx
00000000 0000000a 756e6547 6c65746e 49656e69
00000001 000006e8 01020800 0000c1a9 bfe9fbff
00000002 02b3b001 000000f0 00000000 2c04307d
00000003 00000000 00000000 00000000 00000000
00000004 00000000 00000000 00000000 00000000
00000005 00000040 00000040 00000003 00022220
00000006 00000001 00000002 00000001 00000000
00000007 00000000 00000000 00000000 00000000
00000008 00000000 00000000 00000000 00000000
00000009 00000000 00000000 00000000 00000000
0000000a 07280201 00000000 00000000 00000000
80000000 80000008 00000000 00000000 00000000
80000001 00000000 00000000 00000000 00100000
80000002 756e6547 20656e69 65746e49 2952286c
80000003 55504320 20202020 20202020 54202020
80000004 30303532 20402020 30302e32 007a4847
80000005 00000000 00000000 00000000 00000000
80000006 00000000 00000000 08006040 00000000
80000007 00000000 00000000 00000000 00000000
80000008 00002020 00000000 00000000 00000000

Vendor ID: "GenuineIntel"; CPUID level 10

Intel-specific functions:
Version 000006e8:
Type 0 - Original OEM
Family 6 - Pentium Pro
Model 14 -
Stepping 8
Reserved 0

Extended brand string: "Genuine Intel(R) CPU T2500 _at_ 2.00GHz"
CLFLUSH instruction cache line size: 8
Initial APIC ID: 1
Hyper threading siblings: 2

Feature flags: bfe9fbff:
FPU Floating Point Unit
VME Virtual 8086 Mode Enhancements
DE Debugging Extensions
PSE Page Size Extensions
TSC Time Stamp Counter
MSR Model Specific Registers
PAE Physical Address Extension
MCE Machine Check Exception
CX8 COMPXCHG8B Instruction
APIC On-chip Advanced Programmable Interrupt Controller present and  
enabled
SEP Fast System Call
MTRR Memory Type Range Registers
PGE PTE Global Flag
MCA Machine Check Architecture
CMOV Conditional Move and Compare Instructions
FGPAT Page Attribute Table
CLFSH CFLUSH instruction
DS Debug store
ACPI Thermal Monitor and Clock Ctrl
MMX MMX instruction set
FXSR Fast FP/MMX Streaming SIMD Extensions save/restore
SSE Streaming SIMD Extensions instruction set
SSE2 SSE2 extensions
SS Self Snoop
HT Hyper Threading
TM Thermal monitor
31 reserved

Feature flags set 2: 0000c1a9:
SSE3 SSE3 extensions
MONITOR MONITOR/MWAIT instructions
5 - unknown feature
EST Enhanced Intel SpeedStep Technology
TM2 Thermal Monitor 2
xTPR Send Task Priority messages
15 - unknown feature

Extended feature flags: 00100000:
XD-bit Execution Disable bit

TLB and cache info:
b0: Instruction TLB: 4-KB Pages, 4-way set associative, 128 entries
b3: Data TLB: 4-KB Pages, 4-way set associative, 128 entries
02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries
f0: 64-byte prefetching
7d: 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
30: 1st-level instruction cache: 32-KB, 8-way set associative, 64- 
byte line size
04: Data TLB: 4MB pages, 4-way set assoc, 8 entries
2c: 1st-level data cache: 32-KB, 8-way set associative, 64-byte line  
size
Processor serial: 0000-06E8-0000-0000-0000-0000

and some dmesg

opyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #4: Tue Jun 13 02:14:12 EDT 2006
     root_at_daemonesque.ghettobsd.com:/usr/obj/usr/src/sys/OMGDEBUG
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2500  _at_ 2.00GHz (3039.78-MHz 686- 
class CPU)
   Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
    
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,XTPR,<b15>>
   AMD Features=0x100000<NX>
   Cores per package: 2
real memory  = 1594609664 (1520 MB)
avail memory = 1553342464 (1481 MB)
kbd0 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,  
RF5413)
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link6: BIOS IRQ 11 for 0.27.INTA is invalid
pci_link2: BIOS IRQ 11 for 0.28.INTC is invalid
pci_link2: BIOS IRQ 11 for 0.29.INTC is invalid
pci_link2: BIOS IRQ 11 for 0.31.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 10 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem  
0x80000000-0x8fffffff,0x98300000-0x9830ffff irq 10 at device 0.0 on pci1
pci0: <dasp> at device 7.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci_link0: BIOS IRQ 11 for 2.0.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 10 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
ath0: <Atheros 5424> mem 0x98100000-0x9810ffff irq 11 at device 0.0  
on pci3
ath0: Ethernet address: 00:16:cb:b6:fd:b7
ath0: mac 10.3 phy 6.1 radio 10.2
pcib4: <ACPI PCI-PCI bridge> irq 9 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <UHCI (generic) USB controller> port 0x40a0-0x40bf irq 11 at  
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: LegSup = 0x1010
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x4080-0x409f irq 11 at  
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: LegSup = 0x0010
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x4060-0x407f irq 9 at  
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: LegSup = 0x0010
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x4040-0x405f irq 10 at  
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: LegSup = 0x0010
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem  
0x98405400-0x984057ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib5
fwohci0: <Lucent FW322/323> mem 0x94000000-0x94000fff irq 11 at  
device 3.0 on pci12
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:16:cb:ff:fe:5a:0e:f4
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:16:cb:5a:0e:f4
fwe0: Ethernet address: 02:16:cb:5a:0e:f4
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 9 at device  
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port 0x40d8-0x40df, 
0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x402f mem  
0x98405000-0x984053ff irq 11 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
ukbd0: <Apple Computer Apple Internal Keyboard / Trackpad, class 0/0,  
rev 2.00/0.60, addr 2> on uhub0
kbd1 at ukbd0
ums0: <Apple Computer Apple Internal Keyboard / Trackpad, class 0/0,  
rev 2.00/0.60, addr 2> on uhub0
ums0: 3 buttons.
uhid0: <Apple Computer Apple Internal Keyboard / Trackpad, class 0/0,  
rev 2.00/0.60, addr 2> on uhub0
uhid1: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/1.09,  
addr 2> on uhub2
ukbd1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr  
2> on uhub3
kbd2 at ukbd1
ums1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr  
2> on uhub3
ums1: 5 buttons.
Timecounter "TSC" frequency 3039782688 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-R UJ-857/HAE4> at ata0-master UDMA66
Interrupt storm detected on "irq11:"; throttling interrupt source
ad5: 95396MB <Seagate ST9100824AS 7.01> at ata2-slave UDMA33
GEOM: ad5: GPT detected, but no protective MBR.
Trying to mount root from ufs:/dev/ad5s1a