Re: another msi blacklist candidate?

On 1/19/07, Mark Atkinson <atkin901_at_yahoo.com> wrote:
> I upgraded a box to -current yesterday with the following pci card in it,
> (this is the msi disabled verbose boot below) but upon bootup, any heavy
> network activity caused watchdog timeouts and resets.   Disabling msi via
> the two tunables fixed the problem.
>
> What info do you need on this problem?
>
> found-> vendor=0x8086, dev=0x1076, revid=0x00
>         bus=4, slot=2, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=10
>         powerspec 2  supports D0 D3  current D0
>         MSI supports 1 message, 64 bit
>         map[10]: type 1, range 32, base 0xdf9c0000, size 17, enabled
> pcib4: requested memory range 0xdf9c0000-0xdf9dffff: good
>         map[14]: type 1, range 32, base 0xdf9e0000, size 17, enabled
> pcib4: requested memory range 0xdf9e0000-0xdf9fffff: good
>         map[18]: type 4, range 32, base 0xdcc0, size  6, enabled
> pcib4: requested I/O range 0xdcc0-0xdcff: in range
> pcib4: matched entry for 4.2.INTA
> pcib4: slot 2 INTA hardwired to IRQ 18
> em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
> 0xdcc0-0xdcff m
> em 0xdf9c0000-0xdf9dffff,0xdf9e0000-0xdf9fffff irq 18 at device 2.0 on pci4
> em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdf9c0000
> em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xdcc0
> em0: bpf attached
> em0: Ethernet address: 00:0e:0c:6e:a1:39
> em0: [FAST]

Talked about this internally, and the advise here is that the em driver change
so that only PCI-E adapters can use MSI, this would eliminate the need to
blacklist in the kernel PCI code.

Jack