I just did a hardware and software upgrade on one of my machines. I've got the 7.0-CURRENT on it from July 13th, and the hardware is an AMD 64 X2 with the recently released Nvidia GeForce 7050 / nForce 630a. I'm running the i386 version of the kernel so that I can use the Nvidia closed-source video driver. Everything seems to work ok, except that the machine hangs after the "Uptime" message when I run "shutdown -r" or "shutdown -p". Setting either hw.acpi.disable_on_reboot or hw.acpi.handle_reboot to 1 makes no difference. I'm unable to break into DDB and I have to resort to the reset button. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #202: Fri Jul 13 19:40:56 PDT 2007 dl_at_scratch.catspoiler.org:/usr/obj/usr/src/sys/GENERICSMB WARNING: WITNESS option enabled, expect reduced performance. ACPI APIC Table: <Nvidia AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2500.02-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 real memory = 2079260672 (1982 MB) avail memory = 2024882176 (1931 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/1 [20070320] ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia AWRDACPI> on motherboard acpi0: [ITHREAD] acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 2000 acpi0: Power Button (fixed) acpi0: reservation of feff0000, 100 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7bdf0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0xfc00-0xfc3f,0x1c00-0x1c3f,0xf400-0xf43f irq 20 at device 1.1 on pci0 smbus0: <System Management Bus> on nfsmb0 smb0: <SMBus generic I/O> on smbus0 nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0 smbus1: <System Management Bus> on nfsmb1 smb1: <SMBus generic I/O> on smbus1 pci0: <memory, RAM> at device 1.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 6 ports with 6 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 12 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 6 ports with 6 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 23 at device 4.0 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <OHCI (generic) USB controller> on ohci1 usb2: USB revision 1.0 uhub2: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 20 at device 4.1 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controller, 12 ports each: usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci1 usb3: USB revision 2.0 uhub3: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia> at device 7.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci1: <ACPI PCI bus> on pcib1 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfd0ff000-0xfd0ff7ff,0xfd0f8000-0xfd0fbfff irq 19 at device 7.0 on pci1 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:50:8d:00:00:99:f0:69 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1358000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:50:8d:99:f0:69 fwe0: Ethernet address: 02:50:8d:99:f0:69 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:50:8d:00:00:99:f0:69 _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xcc00-0xccff mem 0xfd0fe000-0xfd0fefff irq 17 at device 9.0 on pci1 ahc0: [ITHREAD] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs atapci1: <GENERIC ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xfe026000-0xfe027fff irq 22 at device 9.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd800-0xd807 mem 0xfe02b000-0xfe02bfff,0xfe02a000-0xfe02a0ff,0xfe029000-0xfe02900f irq 23 at device 10.0 on pci0 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe0: Ethernet address: 00:50:8d:9f:6d:e3 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 17.0 on pci0 pci8: <ACPI PCI bus> on pcib8 vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 20 at device 18.0 on pci0 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model MouseMan+, device ID 0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: CDROM <TOSHIBA CD-ROM XM-6602B/1017> at ata0-master UDMA33 ad4: 476940MB <SAMSUNG HD501LJ CR100-10> at ata2-master UDMA33 ad5: 476940MB <SAMSUNG HD501LJ CR100-10> at ata2-slave UDMA33 Waiting 3 seconds for SCSI devices to settle da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST336706LW 010A> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) da0: Command Queueing Enabled da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C) SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. GEOM_LABEL: Label for provider da0s3 is ext2fs//. Trying to mount root from ufs:/dev/da0s1a pid 717 (rpc.statd), uid 0: exited on signal 11 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 1 1 1 1 0 0 done All buffers synced.Received on Mon Jul 16 2007 - 01:46:48 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:14 UTC