Dmitry Morozovsky wrote: > On Fri, 27 Jul 2007, Dmitry Morozovsky wrote: > > DM> on some of my mobos -current hangs early (when starning init) if kbdmux is > DM> included in kernel (both on i386 and amd64); this seems to be some race, as > DM> hangs are not 100% reproducible. What info should I provide to debug? > DM> > DM> I'm using only PS2 keyboards, and have no other format keyboards handy; > DM> however, I can obtain USB keyb if needed. > > Possibly worth noting: PS2 keyboard is usually plugged in via KVMs - this may > be the source of problems. > > > Sincerely, > D.Marck [DM5020, MCK-RIPE, DM3-RIPN] > ------------------------------------------------------------------------ > *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck_at_rinet.ru *** > ------------------------------------------------------------------------ > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" > Unfortunately not, Have the same problem here with an ASUS-mobo (Athlon X2) with 7-current-amd64 and i386 with PS2 and USB-Keyboard. Every combination of amd64,i386,ps2,usb hangs. The machine ist completely responsible over the network, but hangs on the console. Only cntl-alt-del is working (reboots after a few seconds). Sometimes (1 of 10 boots) the machine comes to the console-prompt. Attached is a dmesg with 6.2-Stable for this machine. There are no problems with 6.2-Stable. Werner Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Fri Jul 27 12:24:48 CEST 2007 root_at_werner1.test.privat.priv:/usr/src/sys/i386/compile/SMP-WERNER1 ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2210.07-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x3<LAHF,CMP> Cores per package: 2 real memory = 1073414144 (1023 MB) avail memory = 1032798208 (984 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard bktr_mem: memory holder loaded kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xd7ffc000-0xd7ffffff irq 16 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0 msk0: Ethernet address: 00:1a:92:2e:8c:51 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [FAST] pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci3: <ACPI PCI bus> on pcib3 nvidia0: <GeForce 6600> mem 0xd8000000-0xdbffffff,0xc8000000-0xcfffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci3 nvidia0: [GIANT-LOCKED] pci0: <memory> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0xdc00-0xdc1f,0x600-0x63f,0x700-0x73f irq 20 at device 10.1 on pci0 smbus0: <System Management Bus> on nfsmb0 nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0 smbus1: <System Management Bus> on nfsmb1 ohci0: <OHCI (generic) USB controller> mem 0xd7efe000-0xd7efefff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xd7effc00-0xd7effcff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered umass0: ENE UB6220, rev 2.00/1.00, addr 2 pcm0: <nVidia nForce4> port 0xd400-0xd4ff,0xd000-0xd0ff mem 0xd7efd000-0xd7efdfff irq 23 at device 13.0 on pci0 pcm0: <Avance Logic ALC850 AC97 Codec> atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xd7efc000-0xd7efcfff irq 20 at device 16.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce CK804 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f mem 0xd7efb000-0xd7efbfff irq 21 at device 17.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib4: <ACPI PCI-PCI bridge> at device 18.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ath0: <Atheros 5212> mem 0xdfff0000-0xdfffffff irq 16 at device 6.0 on pci4 ath0: Ethernet address: 00:40:f4:a1:07:2a ath0: mac 7.9 phy 4.5 radio 5.6 bktr0: <BrookTree 878> mem 0xd6ffe000-0xd6ffefff irq 17 at device 7.0 on pci4 bktr0: [GIANT-LOCKED] bktr0: Hauppauge Model 61344 D221 bktr0: Detected a MSP3415D-B3 at 0x80 bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control. pci4: <multimedia> at device 7.1 (no driver attached) fwohci0: <Texas Instruments TSB43AB22/A> mem 0xdffef800-0xdffeffff,0xdffe8000-0xdffebfff irq 16 at device 11.0 on pci4 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:01:19:95:48 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:19:95:48 fwe0: Ethernet address: 02:11:d8:19:95:48 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xb480-0xb487 mem 0xd7efa000-0xd7efafff irq 22 at device 19.0 on pci0 nve0: Ethernet address 00:1a:92:2e:9b:75 miibus1: <MII bus> on nve0 e1000phy1: <Marvell 88E1111 Gigabit PHY> on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nve0: Ethernet address: 00:1a:92:2e:9b:75 pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci6: <ACPI PCI bus> on pcib6 acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: Device USB Device, rev 1.10/1.03, addr 2, iclass 3/1 kbd2 at ukbd0 ums0: Device USB Device, rev 1.10/1.03, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec ad0: 78167MB <Maxtor 6Y080L0 YAR41VW0> at ata0-master UDMA133 acd0: DVDR <PHILIPS DVDR1640P/P2.5> at ata1-master UDMA33 ad4: 286188MB <Maxtor 6L300S0 BANC1G10> at ata2-master SATA150 SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB2.0 CardReader CF 0100> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <USB2.0 CardReader SM XD 0100> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <USB2.0 CardReader MS 0100> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <USB2.0 CardReader SD 0100> Removable Direct Access SCSI-0 device da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad4s1a mskc0: Uncorrectable PCI Express error ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled msk0: link state changed to UP mskc0: Uncorrectable PCI Express errorReceived on Fri Jul 27 2007 - 11:15:23 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:15 UTC