Re: Current does not boot - BIOS problem?

From: Randall Stewart <rrs_at_cisco.com>
Date: Tue, 19 Jun 2007 12:35:18 -0400
Hmm.. I had something similar to this happen on
my laptop once a ways back..

It was a T40 and the screw that holds the HD
had fallen out (without me noticing) and the HD
had actually come out of its slot slightly..

Plugging the disk back in and then booting fixed
the problem..

But in a desktop this just seems to be not possible
unless maybe your drive went bad??

R
Marinos Ilias wrote:
> Hello list, Yesterday I upgraded to latest -CURRENT.Although the
> build and installing was successful, the system refuses to boot.It
> stops at the boot sequence with the following error:
> 
> 
> Can't work out which disk we are booting from. Guessed BIOS device
> 0xffffffff not found by probes, defaulting to disk0:
> 
> panic: free: guard1 fail _at_0x5195c from
> /home/ncvs/src/sys/boot/i386/loader/../../common/module.c:957 -->
> Press a key on the console to reboot <--
> 
> 
> I cannot figure out what kind of problem is it.It's weird that the
> system cannot find which disk to boot from.I didn't have such
> problems at past and I run CURRENT at this desktop for over a
> year.Also I want to add that I cannot either boot the kernel.old , as
> it hangs when I try : kernel /boot/kernel.old/kernel at boot prompt.
> 
> 
> If you have any ideas, you're welcome!
> 
> Thank you.
> 
> Ilias Marinos _______________________________________________ 
> freebsd-current_at_freebsd.org mailing list 
> http://lists.freebsd.org/mailman/listinfo/freebsd-current To
> unsubscribe, send any mail to
> "freebsd-current-unsubscribe_at_freebsd.org"
> 


-- 
Randall Stewart
NSSTG - Cisco Systems Inc.
803-345-0369 <or> 803-317-4952 (cell)
Received on Tue Jun 19 2007 - 14:33:28 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:12 UTC