mjacob_at_freebsd.org wrote: >>> hint.isp.0.debug=0x105 >>> >>> set and send me the boot output, would you? Here's the entire dmesg. It looks like there are now 4 (!?) devices pointing to the same FC "drive"? Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #4: Fri Mar 9 17:10:32 CET 2007 ivoras_at_quad.cc.fer.hr:/usr/obj/usr/src/sys/PAESMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 2216 HE (2400.10-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f12 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> Cores per package: 2 real memory = 4815060992 (4592 MB) avail memory = 4191055872 (3996 MB) ACPI APIC Table: <IBM SERLEWIS> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic0 <Version 1.1> irqs 0-15 on motherboard kbd1 at kbdmux0 acpi0: <IBM SERLEWIS> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 cpu2: <ACPI CPU> on acpi0 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 cpu3: <ACPI CPU> on acpi0 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pci2: <ACPI PCI bus> on pcib2 bce0: <Broadcom NetXtreme II BCM5706 1000Base-SX (A2), v0.9.6> mem 0xea000000-0xebffffff irq 17 at device 4.0 on pci2 bce0: ASIC ID 0x57060021; Revision (A2); PCI-X 64-bit 133MHz miibus0: <MII bus> on bce0 gentbi0: <Generic ten-bit interface> on miibus0 gentbi0: 1000baseSX, 1000baseSX-FDX, auto bce0: Ethernet address: 00:14:5e:6d:2d:74 bce1: <Broadcom NetXtreme II BCM5706 1000Base-SX (A2), v0.9.6> mem 0xec000000-0xedffffff irq 18 at device 5.0 on pci2 bce1: ASIC ID 0x57060021; Revision (A2); PCI-X 64-bit 133MHz miibus1: <MII bus> on bce1 gentbi1: <Generic ten-bit interface> on miibus1 gentbi1: 1000baseSX, 1000baseSX-FDX, auto bce1: Ethernet address: 00:14:5e:b3:2a:38 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0x3000-0x30ff mem 0xf9fff000-0xf9ffffff irq 3 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0x3100-0x31ff mem 0xf9ffe000-0xf9ffefff irq 3 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0x3200-0x32ff mem 0xf9ffd000-0xf9ffdfff irq 3 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered uhub3: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 2 uhub3: multiple transaction translators uhub3: 2 ports with 2 removable, self powered pci0: <display, VGA> at device 5.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xe8010000-0xe8013fff,0xe8000000-0xe800ffff irq 19 at device 4.0 on pci3 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.12.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). isp0: <Qlogic ISP 2422 PCI FC-AL Adapter> port 0x4100-0x41ff mem 0xe8014000-0xe8014fff irq 20 at device 5.0 on pci3 isp0: [GIANT-LOCKED] isp0: Board Type 2422, Chip Revision 0x2, loaded F/W Revision 4.0.20 isp0: 2K Logins Supported isp0: Last F/W revision was 4.0.13 isp0: 4096 max I/O command limit set isp0: line 1196: markportdb isp0: Starting Initial Loop Down Timer isp1: <Qlogic ISP 2422 PCI FC-AL Adapter> port 0x4200-0x42ff mem 0xe8015000-0xe8015fff irq 21 at device 5.1 on pci3 isp1: [GIANT-LOCKED] isp1: Board Type 2422, Chip Revision 0x2, loaded F/W Revision 4.0.20 isp1: 2K Logins Supported isp1: 4096 max I/O command limit set isp1: line 1196: markportdb isp1: Starting Initial Loop Down Timer pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci8: <ACPI PCI bus> on pcib8 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 2.000 msec isp1: line 5274: markportdb isp1: line 5363: markportdb isp1: Stopping Loop Down Timer isp1: line 5310: markportdb isp1: line 5348: markportdb isp1: line 5348: markportdb isp1: line 5348: markportdb isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp1: isp_kthread: checking FC state isp1: FC Link Test Entry isp1: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp1: Firmware State <Config Wait->Ready> isp1: Register FC4 Type accepted isp1: HBA PortID 0x820500 N-Port Handle 0, Connection Topology 'F Port' isp1: HBA WWNN 0x200000e08bba6d39 HBA WWPN 0x210100e08bba6d39 isp1: FC Link Test Complete isp1: FC Scan Fabric isp1: got 9 ports back from name server isp1: Checking Fabric Port 0x820000 isp1: Fabric Port 0x820000 is New Entry isp1: Checking Fabric Port 0x820100 isp1: Fabric Port 0x820100 is New Entry isp1: Checking Fabric Port 0x820200 isp1: Fabric Port 0x820200 is New Entry isp1: Checking Fabric Port 0x820300 isp1: Fabric Port 0x820300 is New Entry isp1: Checking Fabric Port 0x820400 isp1: Fabric Port 0x820400 is New Entry isp1: skip ourselves @ PortID 0x820500 isp1: Checking Fabric Port 0x820600 isp1: Fabric Port 0x820600 is New Entry isp1: Checking Fabric Port 0x820700 isp1: Fabric Port 0x820700 is New Entry isp1: Checking Fabric Port 0x820f00 isp1: Fabric Port 0x820f00 is New Entry isp1: FC Scan Fabric Done isp1: Synchronizing PDBs isp1: PortID 0x820000 handle 0x1 role Target arrived at tgt 0 WWNN 0x200400a0b8215193 WWPN 0x200500a0b8215194 isp1: PortID 0x820100 handle 0x2 role Initiator arrived WWNN 0x200100e08ba50770 WWPN 0x210100e08ba50770 isp1: PortID 0x820200 handle 0x3 role Initiator arrived WWNN 0x200100e08ba56871 WWPN 0x210100e08ba56871 isp1: PortID 0x820300 handle 0x4 role Initiator arrived WWNN 0x200100e08ba5db6e WWPN 0x210100e08ba5db6e isp1: PortID 0x820400 handle 0x5 role Initiator arrived WWNN 0x200100e08bab6764 WWPN 0x210100e08bab6764 isp1: PortID 0x820600 handle 0x6 role Initiator arrived WWNN 0x200100e08bbaa53a WWPN 0x210100e08bbaa53a isp1: PortID 0x820700 handle 0x7 role Initiator arrived WWNN 0x200100e08ba53e6f WWPN 0x210100e08ba53e6f isp1: PortID 0x820f00 handle 0x8 role Target arrived at tgt 1 WWNN 0x200400a0b8215193 WWPN 0x200400a0b8215195 isp1: PortID 0xfffffe handle 0x7fe role (none) stayed WWNN 0x100000051e35e91a WWPN 0x200500051e35e91a isp1: isp_kthread: FC state OK isp1: isp_kthread: releasing simq isp1: isp_kthread: sleep time 0 isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 0) isp0: isp_kthread: releasing simq isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 1) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 2) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 3) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 4) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 5) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 6) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 7) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 8) isp0: isp_kthread: sleep time 1 isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 9) isp0: isp_kthread: sleep time 1 isp0: Loop Down Timer expired isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Loss Of Sync> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 302) isp0: isp_kthread: releasing simq isp0: isp_kthread: sleep time 0 da1 at isp1 bus 0 target 0 lun 0 da1: <IBM 1724-100 FAStT 0542> Fixed Direct Access SCSI-3 device da1: 100.000MB/s transfers, Tagged Queueing Enabled da1: 20480MB (41943040 512 byte sectors: 255H 63S/T 2610C) da2 at isp1 bus 0 target 1 lun 0 da2: <IBM 1724-100 FAStT 0542> Fixed Direct Access SCSI-3 device da2: 100.000MB/s transfers, Tagged Queueing Enabled da2: 20480MB (41943040 512 byte sectors: 255H 63S/T 2610C) da0 at mpt0 bus 0 target 0 lun 0 da0: <IBM-ESXS MAY2073RC T107> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! GEOM_LABEL: Label for provider da1 is ufs/qservices. GEOM_LABEL: Label for provider da0s1a is ufs/root. GEOM_LABEL: Label for provider da0s1b is label/swap. GEOM_LABEL: Label for provider da0s1d is ufs/usr. GEOM_LABEL: Label for provider da0s1e is ufs/var. GEOM_LABEL: Label for provider da0s1f is ufs/home. GEOM_LABEL: Label for provider da0s1g is ufs/storage. Trying to mount root from ufs:/dev/ufs/root isp0: line 5274: markportdb isp0: line 5363: markportdb isp0: Stopping Loop Down Timer isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Wait Login> isp0: isp_fclink_test: not at FW_READY state isp0: isp_fc_runstate: linktest failed isp0: kthread: FC loop not up (down count 302) isp0: isp_kthread: releasing simq isp0: isp_kthread: sleep time 0 isp0: line 5310: markportdb isp0: line 5348: markportdb isp0: isp_kthread: checking FC state isp0: FC Link Test Entry isp0: line 2450: markportdb isp0: Firmware State <Config Wait->Ready> isp0: Register FC4 Type accepted isp0: HBA PortID 0x810500 N-Port Handle 0, Connection Topology 'F Port' isp0: HBA WWNN 0x200000e08b9a6d39 HBA WWPN 0x210000e08b9a6d39 isp0: FC Link Test Complete isp0: FC Scan Fabric isp0: got 9 ports back from name server isp0: Checking Fabric Port 0x810000 isp0: Fabric Port 0x810000 is New Entry isp0: Checking Fabric Port 0x810100 isp0: Fabric Port 0x810100 is New Entry isp0: Checking Fabric Port 0x810200 isp0: Fabric Port 0x810200 is New Entry isp0: Checking Fabric Port 0x810300 isp0: Fabric Port 0x810300 is New Entry isp0: Checking Fabric Port 0x810400 isp0: Fabric Port 0x810400 is New Entry isp0: skip ourselves @ PortID 0x810500 isp0: Checking Fabric Port 0x810600 isp0: Fabric Port 0x810600 is New Entry isp0: Checking Fabric Port 0x810700 isp0: Fabric Port 0x810700 is New Entry isp0: Checking Fabric Port 0x810f00 isp0: Fabric Port 0x810f00 is New Entry isp0: FC Scan Fabric Done isp0: Synchronizing PDBs isp0: PortID 0x810000 handle 0x1 role Target arrived at tgt 0 WWNN 0x200400a0b8215193 WWPN 0x200400a0b8215194 isp0: PortID 0x810100 handle 0x2 role Initiator arrived WWNN 0x200000e08b850770 WWPN 0x210000e08b850770 isp0: PortID 0x810200 handle 0x3 role Initiator arrived WWNN 0x200000e08b856871 WWPN 0x210000e08b856871 isp0: PortID 0x810300 handle 0x4 role Initiator arrived WWNN 0x200000e08b85db6e WWPN 0x210000e08b85db6e isp0: PortID 0x810400 handle 0x5 role Initiator arrived WWNN 0x200000e08b8b6764 WWPN 0x210000e08b8b6764 isp0: PortID 0x810600 handle 0x6 role Initiator arrived WWNN 0x200000e08b9aa53a WWPN 0x210000e08b9aa53a isp0: PortID 0x810700 handle 0x7 role Initiator arrived WWNN 0x200000e08b853e6f WWPN 0x210000e08b853e6f isp0: PortID 0x810f00 handle 0x8 role Target arrived at tgt 1 WWNN 0x200400a0b8215193 WWPN 0x200500a0b8215195 isp0: PortID 0xfffffe handle 0x7fe role (none) stayed WWNN 0x100000051e35ecc8 WWPN 0x200500051e35ecc8 isp0: isp_kthread: FC state OK isp0: isp_kthread: releasing simq isp0: isp_kthread: sleep time 0 da3 at isp0 bus 0 target 0 lun 0 da3: <IBM 1724-100 FAStT 0542> Fixed Direct Access SCSI-3 device da3: 100.000MB/s transfers, Tagged Queueing Enabled da3: 20480MB (41943040 512 byte sectors: 255H 63S/T 2610C) da4 at isp0 bus 0 target 1 lun 0 da4: <IBM 1724-100 FAStT 0542> Fixed Direct Access SCSI-3 device da4: 100.000MB/s transfers, Tagged Queueing Enabled da4: 20480MB (41943040 512 byte sectors: 255H 63S/T 2610C) isp0: line 5348: markportdb isp0: line 5348: markportdb isp0: isp_kthread: checking FC state isp0: FC Scan Fabric isp0: got 9 ports back from name server isp0: Checking Fabric Port 0x810000 isp0: Fabric Port 0x810000 Now Pending Valid isp0: Checking Fabric Port 0x810100 isp0: Fabric Port 0x810100 Now Pending Valid isp0: Checking Fabric Port 0x810200 isp0: Fabric Port 0x810200 Now Pending Valid isp0: Checking Fabric Port 0x810300 isp0: Fabric Port 0x810300 Now Pending Valid isp0: Checking Fabric Port 0x810400 isp0: Fabric Port 0x810400 Now Pending Valid isp0: skip ourselves _at_ PortID 0x810500 isp0: Checking Fabric Port 0x810600 isp0: Fabric Port 0x810600 Now Pending Valid isp0: Checking Fabric Port 0x810700 isp0: Fabric Port 0x810700 Now Pending Valid isp0: Checking Fabric Port 0x810f00 isp0: Fabric Port 0x810f00 Now Pending Valid isp0: FC Scan Fabric Done isp0: Synchronizing PDBs isp0: PortID 0x810000 handle 0x1 role Target stayed at tgt 0 WWNN 0x200400a0b8215193 WWPN 0x200400a0b8215194 isp0: PortID 0x810100 handle 0x2 role Initiator stayed WWNN 0x200000e08b850770 WWPN 0x210000e08b850770 isp0: PortID 0x810200 handle 0x3 role Initiator stayed WWNN 0x200000e08b856871 WWPN 0x210000e08b856871 isp0: PortID 0x810300 handle 0x4 role Initiator stayed WWNN 0x200000e08b85db6e WWPN 0x210000e08b85db6e isp0: PortID 0x810400 handle 0x5 role Initiator stayed WWNN 0x200000e08b8b6764 WWPN 0x210000e08b8b6764 isp0: PortID 0x810600 handle 0x6 role Initiator stayed WWNN 0x200000e08b9aa53a WWPN 0x210000e08b9aa53a isp0: PortID 0x810700 handle 0x7 role Initiator stayed WWNN 0x200000e08b853e6f WWPN 0x210000e08b853e6f isp0: PortID 0x810f00 handle 0x8 role Target stayed at tgt 1 WWNN 0x200400a0b8215193 WWPN 0x200500a0b8215195 isp0: PortID 0xfffffe handle 0x7fe role (none) stayed WWNN 0x100000051e35ecc8 WWPN 0x200500051e35ecc8 isp0: isp_kthread: FC state OK isp0: isp_kthread: releasing simq isp0: isp_kthread: sleep time 0Received on Mon Mar 12 2007 - 11:36:35 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:06 UTC