Re: yongari nfe problems

Thank you Pyun YongHyeon for the newest patch. I am running it with 
if_nfe.c and if_nfereg.h from 03/21/2007 and if_nfevar.h from 03/19/2007 
on FreeBSD 7.0-CURRENT (i386) from today.

boot -v gives me:
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 
xfbef3000-0xfbef3fff,0xfbefa800-0xfbefa8ff,0
xfbefa400-0xfbefa40f irq 22 at device 8.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfbef3000
miibus0: <MII bus> on nfe0
ciphy0: <VSC8601 10/100/1000TX PHY> PHY 1 on miibus0
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:16:17:95:d9:7c
nfe0: [MPSAFE]
nfe0: [FILTER]


Now there are no more warning from miibus0 :-)

Unfortunately at bigger network transfers I still observe the previously 
described watchdog timeouts:

nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
...

During these timeouts I am not able to use my network ;-(

I would be happy if I could help solving this problem. Let me know if I 
can test anything.

Thank you so long,
Rainer


Pyun YongHyeon schrieb:
> On Tue, Mar 13, 2007 at 04:01:53PM +0900, To Rainer Hurling wrote:
>  > On Tue, Mar 13, 2007 at 06:29:25AM +0100, Rainer Hurling wrote:
>  >  > Over night my systems works well, only one message from network came up:
>  >  > 
>  >  > nfe0: watchdog timeout (missed Tx interrupts) -- recovering
>  >  > nfe0: watchdog timeout (missed Tx interrupts) -- recovering
>  >  > 
>  > 
>  > I'm not sure this watchdog is related with VSC8601 PHY.
>  > However Mr. Darren also reported watchdog errors on MCP55 so I have
>  > to think again what makes MCP55 different.
>  > 
>  >  > In the morning I tried your patch for mii and PHY. Bootingverbose again 
>  >  > gives me:
>  >  > 
>  >  > nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem
>  >  > 0xfbef3000-0xfbef3fff,0xfbefa800-0xfbefa8ff,0
>  >  > xfbefa400-0xfbefa40f irq 22 at device 8.0 on pci0
>  >  > nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfbef3000
>  >  > nfe0: bpf attached
>  >  > nfe0: Ethernet address: 00:16:17:95:d9:7c
>  >  > miibus0: <MII bus> on nfe0
>  >  > ciphy0: <VSC8601 10/100/1000TX PHY> PHY 1 on miibus0
>  >  > ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
>  >  > 1000baseT-FDX, auto
>  >  > nfe0: [MPSAFE]
>  >  > nfe0: [FILTER]
>  >  > 
>  >  > 
>  >  > First, all seems to be ok. Network was up and connected. After a minute 
>  >  > I lost connection and the following messages appeared:
>  >  > 
>  >  > miibus0: unknown CICADA PHY model 2
>  >  > miibus0: unknown CICADA PHY model 2
>  >  > miibus0: unknown CICADA PHY model 2
>  > 
>  > Sorry, you can ignore this. I've ommitted a code needed in fixup code
>  > for VSC8601.
>  > 
>  >  > nfe0: watchdog timeout (missed Tx interrupts) -- recovering
>  >  > nfe0: watchdog timeout (missed Tx interrupts) -- recovering
>  >  > nfe0: watchdog timeout (missed Tx interrupts) -- recovering
>  >  > nfe0: watchdog timeout (missed Tx interrupts) -- recovering
>  >  > ...
>  >  > 
>  > 
>  > This is real problem. I guess ciphy(4) failed to report correct link
>  > state so watchdog handler was activated. Apparently we **NEED** a copy
>  > of the documentation for the PHY. :-(
>  > You can revert the PHY changes and use ukphy(4) until the issue is
>  > resolved.
>  > 
> 
> Would you try updated ciphy(4) patch?
> I've got a successful report from nfe(4)/CS8201 user.
> 
>  >  > 
>  >  > Probably a little more work on the patches is needed?
>  >  > 
>  > 
>  > Yes, ciphy(4) should be educated to access magic registers.
>  > 
>  >  > I am offline for the next ten hours. After that I could test any new 
>  >  > version ;-)
>  >  > 
>  > 
>  > I'll let you know if I have a patch for the watchdog errors. In these
>  > days I have little time to focus on FreeBSD stuff so don't expect
>  > quick reply.
>  > Thank you very much for testing and your time.
>  > 
>  >  > Thank you very much,
>  >  > Rainer
>  >  > 
>  > -- 
>  > Regards,
>  > Pyun YongHyeon
>