Re: ichwd for ICH8

From: Mike Tancsa <mike_at_sentex.net>
Date: Mon, 14 May 2007 11:51:25 -0400
At 03:02 AM 5/1/2007, Dag-Erling Smørgrav wrote:
>Takeharu KATO <takeharu1219_at_ybb.ne.jp> writes:
> > I wrote ICH7 or later support patch for sys/dev/ichwd watch dog driver.
> > I tested this patch on ICH8 compliant mother board(GIGA BYTE GA-965P-DS3).
> >
> > Please apply the patch.
>
>I will try to take care of this some time within the next two weeks.
>Feel free to contact me off-list if you have any updates.

Hi,
         This applies cleanly to RELENG_6 and 
actually works on my super micro board. The base ichwd does not


ichwd0: <Intel ICH5 watchdog timer> on isa0    # FreeBSD 6.2
ppc0: parallel port not found.
ichwd0: detaching
ichwd0: detached
ichwd module unloaded
ichwd module loaded
ichwd0: <Intel ICH5 watchdog timer> at port 
0x1030-0x1037,0x1060-0x1069 on isa0  # RELENG_6
ppc0: parallel port not found.
ichwd0: detached
ichwd module unloaded
ichwd module loaded
ichwd0: <Intel ICH7 watchdog timer> at port 
0x1030-0x1037,0x1060-0x1069 on isa0  # RELENG_6 plus current patch
ichwd0: Intel ICH7 watchdog timer (TCO version 2)
ppc0: parallel port not found.

isab0_at_pci0:31:0:        class=0x060100 
card=0x798015d9 chip=0x27b88086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82801GB/GR (ICH7 Family) LPC Interface Controller'
     class      = bridge
     subclass   = PCI-ISA
     cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                  features: Quick Resume, 4 PCI-e x1 slots


         ---Mike 
Received on Mon May 14 2007 - 13:51:42 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:10 UTC