Is there any hope of avoiding May 22 15:16:14 node11 kernel: bge0: watchdog timeout -- resetting May 22 15:16:14 node11 kernel: bge0: link state changed to DOWN May 22 15:16:17 node11 kernel: bge0: link state changed to UP /boot/loader.conf contains node11:kargl[202] cat /boot/loader.conf hw.pci.enable_msix="0" hw.pci.enable_msi="0" hw.bge.allow_asf="1" kargl[203] ifconfig bge0 bge0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether 00:e0:81:40:47:66 inet 192.168.0.11 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet 1000baseTX <full-duplex> status: active I get the similar messages whether I have link0 or not and whether I allow bge0 to autoselect media or force 1000baseTX <full-duplex>. bge0 is connected to a SMC TigerSwitch SMC8624T. uname shows FreeBSD node11.cimu.org 7.0-CURRENT FreeBSD 7.0-CURRENT #6: Fri May 18 10:19:43 PDT 2007 kargl_at_node10.cimu.org:/usr/obj/usr/src/sys/HPC amd64 where the date and time corresponds to roughly my last csup. -- SteveReceived on Tue May 22 2007 - 20:43:17 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:10 UTC