> The ICRC errors indicate data corruption on the way from the > drive to the controller (i.e. bad cables or induction of noise). > > This is definitely a hardware problem that is only detected by > the CRC unit in the IDE adapter. > > As a work-around reduce the data rate to UDMA33 (which worked > with 40pin cables; but beware that the transfer could still be > silently corrupted, since UDMA33 is not protected by ICRC and > transmission errors could therefore remain undetected). Your are a genious! Thank you. I tried to change hdd and motherboard, but not the cable > BTW: How about upgrading to 6.2 ;-) Thinking about it as I got also USB problems cheers Thanks again AlexReceived on Wed May 30 2007 - 11:27:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:11 UTC