da0 detection garbled: da0: <SSMEPA:G AATPE CSPTU3 3#617 5L3auLnWc hHePdS!3>

From: Gelsema, P \(Patrick\) - FreeBSD <"Gelsema,>
Date: Thu, 1 Nov 2007 12:31:32 +0100 (CET)
Hi all,

on FreeBSD hulk.superhero.nl 7.0-BETA1 FreeBSD 7.0-BETA1 #0: Wed Oct 31
08:35:27 UTC 2007     root_at_hulk.superhero.nl:/usr/obj/usr/src/sys/GENERIC 
amd64

I have the following issue. da0 is garbled. This happened after rebuilding
world on the 28th of October.

Also.. the Disk is U320, should be 320MB instead of 160MB as the speed it
is detected. In FreeBSD 6.2 it is detected as 320MB. It is RELENG_7 that
detects it as 160MB. I have already changed the cable and tried a
different disks.

Before on 22nd of October:

ahd0: <Adaptec 39320D Ultra320 SCSI adapter> port
0xe800-0xe8ff,0xe400-0xe4ff mem 0xdd 5fe000-0xdd5fffff irq 17 at device
10.0 on pci1
ahd0: [ITHREAD]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs

da0 at ahd0 bus 0 target 2 lun 0
da0: <SEAGATE ST336753LW HPS3> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da0: Command Queueing Enabled
da0: 34732MB (71132960 512 byte sectors: 255H 63S/T 4427C)

After 28th of October

ahd0: <Adaptec 39320D Ultra320 SCSI adapter> port
0xe800-0xe8ff,0xe400-0xe4ff mem 0xdd 5fe000-0xdd5fffff irq 17 at device
10.0 on pci1
ahd0: [ITHREAD]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs

da0 at ahd0 bus 0 target 2 lun 0
da0: <SSMEPA:G AATPE  CSPTU3 3#617 5L3auLnWc hHePdS!3>
Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da0: Command Queueing Enabled
da0: 34732MB (71132960 512 byte sectors: 255H 63S/T 4427C)

Please let me know if more information is required.

Rgds,

Patrick
Received on Thu Nov 01 2007 - 14:32:28 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:20 UTC