Re: MacBook users: possible fix for the SMP problem

From: Maxim Sobolev <sobomax_at_FreeBSD.org>
Date: Mon, 05 Nov 2007 15:13:53 -0800
I've just tested it on my 1st gen MacBook Pro. Yes, indeed, it solves 
both problems - one with CPU frequency detection and another one with 
the AP startup. Thanks!

-Maxim

Rui Paulo wrote:
> Hi,
> I've been contacted by Marco Trillo and I think he has found the
> source of the SMP problem.
> The problem seems to rely on Intel ICH7. Basically we need to disable
> the "LEGACY_USB" bit before we calibrate the clocks.
> "LEGACY_USB", according to Marco (I don't have the ICH7 spec at hand),
> "causes legacy USB circuit to generate SMIs".
> 
> Please try the following patch:
> --- sys/amd64/isa/clock.c.orig	2007-11-04 20:31:09.000000000 +0000
> +++ sys/amd64/isa/clock.c	2007-11-04 20:34:59.000000000 +0000
> _at__at_ -577,6 +577,8 _at__at_ startrtclock()
>   	writertc(RTC_STATUSA, rtc_statusa);
>   	writertc(RTC_STATUSB, RTCSB_24HR);
> 
> +	outl(0x430, inl(0x430) & ~0x8);
> +
>   	freq = calibrate_clocks();
>   #ifdef CLK_CALIBRATION_LOOP
>   	if (bootverbose) {
> --- sys/i386/isa/clock.c.orig	2007-11-04 20:34:03.000000000 +0000
> +++ sys/i386/isa/clock.c	2007-11-04 20:34:30.000000000 +0000
> _at__at_ -621,6 +621,8 _at__at_ startrtclock()
>   	writertc(RTC_STATUSA, rtc_statusa);
>   	writertc(RTC_STATUSB, RTCSB_24HR);
> 
> +	outl(0x430, inl(0x430) & ~0x8);
> +
>   	freq = calibrate_clocks();
>   #ifdef CLK_CALIBRATION_LOOP
>   	if (bootverbose) {
> 
> 
> This should probably fix two issues:
> 1) The second core should start without any trick (e.g. key press)
> 2) We should be able to run with HZ=1000 (the default) without any
> problem. To check if this is indeed the case, try booting with HZ=1000
> (loader.conf variable kern.hz) and check if your CPU clock shows up
> correctly in the dmesg. After that, please also check if 'time sleep
> 1' takes one second (not more and not less).
> 
> Also, please test if there are any USB problems.
> 
> Note: this is still a hack. I'm still thinking about a way to
> correctly identify on which systems we need to apply this fix.
> 
> Regards.
> 
Received on Mon Nov 05 2007 - 22:38:12 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:21 UTC