Thanks for the attention... but I feel this is rather repeative and useless at best... what I mean it is like your classic scene in American cop shows where the victim get's fed up with answering questions and wants to know when the cops will get back to solving the case. Sorry for not including the output of verbose boot logging but dmesg truncated some of it... how do I save the entire log? > Yes, please. These information is very important for knowing how to > > change the situation, thanks. > I have included comments by placing them on the line below with two leading tabs and **** Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Tue Oct 30 18:07:21 UTC 2007 root_at_:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E6850 _at_ 3.00GHz (3005.68-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 **** p35/ihc9 chipset Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20000800<SYSCALL,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 4282322944 (4083 MB) avail memory = 4128833536 (3937 MB) ACPI APIC Table: <052107 APIC1013> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <052107 RSDT1013> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, dff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 86, should be 79 [20070320] est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 uhci0: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcdffc00-0xfcdfffff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <GENERIC ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfceffc00-0xfcefffff irq 16 at device 0.0 on pci3 atapci0: [ITHREAD] *** whereis ata1 ??? ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] *** HDD ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] *** CD pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfcfff000-0xfcffffff irq 17 at device 0.0 on pci4 re0: Using 2 MSI messages miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:19:db:b5:f8:0f re0: [FILTER] re0: [FILTER] uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 16 at device 29.3 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfcdff800-0xfcdffbff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 8 ports with 8 removable, self powered pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xf0000000-0xf7ffffff irq 17 at device 1.0 on pci5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f irq 19 at device 31.2 on pci0 *** Speed is correct atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0 *** Speed is correct atapci2: [ITHREAD] ata6: <ATA channel 0> on atapci2 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci2 ata7: [ITHREAD] acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Microsoft Comfort Optical Mouse 1000, class 0/0, rev 2.00/1.21, addr 2> on uhub1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec acd0: DVDR <TSSTcorpCD/DVDW SH-S183L/SB01> at ata4-master SATA150 ad10: 476940MB <Seagate ST3500630AS 3.AAE> at ata5-master SATA150 *** Both speeds are incorrect should be SATA300 (btw pre-path RELENG_6 reports UDMA33) SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad10s1a hostb0_at_pci0:0:0:0: class=0x060000 card=0x73601462 chip=0x29c08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(Bearlake) Processor to I/O Controller' class = bridge subclass = HOST-PCI pcib1_at_pci0:0:1:0: class=0x060400 card=0x00008086 chip=0x29c18086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '(Bearlake) PCIe Root Port' class = bridge subclass = PCI-PCI uhci0_at_pci0:0:26:0: class=0x0c0300 card=0x73601462 chip=0x29378086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci1_at_pci0:0:26:1: class=0x0c0300 card=0x73601462 chip=0x29388086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci0_at_pci0:0:26:7: class=0x0c0320 card=0x73601462 chip=0x293c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller' class = serial bus subclass = USB pcm0_at_pci0:0:27:0: class=0x040300 card=0x73601462 chip=0x293e8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) HD Audio Controller' class = multimedia pcib2_at_pci0:0:28:0: class=0x060400 card=0x73601462 chip=0x29408086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1' class = bridge subclass = PCI-PCI pcib3_at_pci0:0:28:4: class=0x060400 card=0x73601462 chip=0x29488086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5' class = bridge subclass = PCI-PCI pcib4_at_pci0:0:28:5: class=0x060400 card=0x73601462 chip=0x294a8086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 6' class = bridge subclass = PCI-PCI uhci2_at_pci0:0:29:0: class=0x0c0300 card=0x73601462 chip=0x29348086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci3_at_pci0:0:29:1: class=0x0c0300 card=0x73601462 chip=0x29358086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci4_at_pci0:0:29:2: class=0x0c0300 card=0x73601462 chip=0x29368086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci5_at_pci0:0:29:3: class=0x0c0300 card=0x73601462 chip=0x29398086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci1_at_pci0:0:29:7: class=0x0c0320 card=0x73601462 chip=0x293a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller' class = serial bus subclass = USB pcib5_at_pci0:0:30:0: class=0x060401 card=0x73601462 chip=0x244e8086 rev=0x92 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0_at_pci0:0:31:0: class=0x060100 card=0x73601462 chip=0x29188086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB (ICH9) LPC Interface Controller' class = bridge subclass = PCI-ISA atapci1_at_pci0:0:31:2: class=0x01018f card=0x73601462 chip=0x29218086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 1' class = mass storage subclass = ATA none0_at_pci0:0:31:3: class=0x0c0500 card=0x73601462 chip=0x29308086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) SMBus Controller' class = serial bus subclass = SMBus atapci2_at_pci0:0:31:5: class=0x010185 card=0x73601462 chip=0x29268086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 2' class = mass storage subclass = ATA atapci0_at_pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab rev=0xb1 hdr=0x00 vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' device = '6121 SATA2 Controller' class = mass storage subclass = ATA re0_at_pci0:4:0:0: class=0x020000 card=0x360c1462 chip=0x816810ec rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet vgapci0_at_pci0:5:1:0: class=0x030000 card=0xb3093842 chip=0x032210de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' device = 'GeForce FX 5200 [NV34.3]' class = display subclass = VGA -- Aryeh M. Friedman Developer, not business, friendly http://www.flosoft-systems.comReceived on Tue Nov 06 2007 - 01:06:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:21 UTC