On Mon, 5 Nov 2007, Xin LI wrote: > Aryeh M. Friedman wrote: >> I have submitted the complete verbose dmesg, pciutil -l and >> everything to several people and all of them have come to the >> conclusion that there is no obvious smoking gone beyond ("it just >> doesn't work")... Thus the comment of ICH9 owners are on their >> own... Next time I reboot I will send you a copy if you really want >> it. > > Yes, please. These information is very important for knowing how to > change the situation, thanks. I have two systems exhibiting problems: 1. Dell Optiplex 745: ad4: 76293MB <WDC WD800JD-75MSA3 10.01E04> at ata2-master SATA150 acd0: CDRW <HL-DT-ST CD-RW/DVD-ROM GCC-H10N/C103> at ata3-master SATA150 ... ATA channel 2: Master: ad4 <WDC WD800JD-75MSA3/10.01E04> Serial ATA II Slave: no device present ATA channel 3: Master: acd0 <HL-DT-ST CD-RW/DVD-ROM GCC-H10N/C103> Serial ATA v1.0 Slave: no device present ... Problem 1: ad4 recoginized as SATA/150 when it is a SATA/300. Problem 2: errors occur when reading a CD-RW (a BETA release) Nov 5 15:57:55 newsys kernel: acd0: TIMEOUT - READ_BIG retrying (1 retry left) Nov 5 15:58:27 newsys kernel: acd0: TIMEOUT - READ_BIG retrying (0 retries left) Nov 5 15:59:00 newsys kernel: acd0: FAILURE - READ_BIG timed out Nov 5 15:59:00 newsys kernel: g_vfs_done():acd0[READ(offset=387680256, length=14336)]error = 5 This showed up during install (used NFS to get around it), but I can reproduce it by mounting the drive and running: cd /cdrom/7-BETA && grep -Rl GENERIC 2. Asus P5K-E/WiFi: ad10: 152627MB <Seagate ST3160827AS 3.42> at ata5-master SATA150 ad12: 152627MB <Seagate ST3160827AS 3.42> at ata6-master SATA150 acd0: <LITE-ON DVDRW LH-20A1S/9L08> DVDR drive at ata10 as master ... ATA channel 5: Master: ad10 <ST3160827AS/3.42> Serial ATA v1.0 Slave: no device present ATA channel 6: Master: ad12 <ST3160827AS/3.42> Serial ATA v1.0 Slave: no device present ... ATA channel 10: Master: acd0 <LITE-ON DVDRW LH-20A1S/9L08> Serial ATA v1.0 Slave: no device present ... Problem: errors when reading an Unreal Tournament CD directly (non-mounted) Nov 4 17:45:00 thor kernel: ata10: reiniting channel .. Nov 4 17:45:00 thor kernel: ata10: SATA connect time=0ms Nov 4 17:45:00 thor kernel: ata10: SIGNATURE: eb140101 Nov 4 17:45:00 thor kernel: ata10: ahci_reset devices=0x4<ATAPI_MASTER> Nov 4 17:45:00 thor kernel: ata10: reinit done .. Nov 4 17:45:00 thor kernel: acd0: TIMEOUT - READ_BIG retrying (1 retry left) Nov 4 17:45:31 thor kernel: ata10: reiniting channel .. Nov 4 17:45:31 thor kernel: ata10: SATA connect time=0ms Nov 4 17:45:31 thor kernel: ata10: SIGNATURE: eb140101 Nov 4 17:45:31 thor kernel: ata10: ahci_reset devices=0x4<ATAPI_MASTER> Nov 4 17:45:31 thor kernel: ata10: reinit done .. Nov 4 17:45:31 thor kernel: acd0: TIMEOUT - READ_BIG retrying (0 retries left) Nov 4 17:46:01 thor kernel: ata10: reiniting channel .. Nov 4 17:46:01 thor kernel: ata10: SATA connect time=0ms Nov 4 17:46:01 thor kernel: ata10: SIGNATURE: eb140101 Nov 4 17:46:01 thor kernel: ata10: ahci_reset devices=0x4<ATAPI_MASTER> Nov 4 17:46:01 thor kernel: ata10: reinit done .. Nov 4 17:46:01 thor kernel: acd0: FAILURE - READ_BIG timed out I also can receive: Nov 4 16:08:47 thor kernel: acd0: FAILURE - MODE_SENSE_BIG timed out Nov 4 17:40:55 thor kernel: acd0: FAILURE - READ_TRACK_INFO timed out I put the dmesg.boot and pciconf logs along with a patch for ICH9R--is it correct?--and a test program with pieces from burncd.c here[1]. For me the test program, which does not burn, will cause timeout errors on my Asus board but not the Dell (grep will as seen above). Sean 1. http://www.farley.org/freebsd/tmp/SATA/ -- scf_at_FreeBSD.orgReceived on Tue Nov 06 2007 - 13:37:55 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:21 UTC