> Date: Mon, 12 Nov 2007 16:45:45 -0800 (PST) > From: Doug Barton <dougb_at_FreeBSD.org> > Sender: owner-freebsd-current_at_freebsd.org > > Just in case someone here can help, and/or it's a bigger problem that > might affect the release. > > The interesting part for this list is probably: > (WW) OS did not count PCI devices, guessing wildly This is only a warning and I get it on every FreeBSD system I have that is running x.org 7.3. I have had no problems with X. I have a Radeon not an nVidia, but the external monitor on it works fine. I just turn it on with xrandr, set the mode, and all is good. (I have only tried same-as.) Looks like your issue is nVidia specific. Here is what my Radeon shows: Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 1400 x 1200 VGA-0 disconnected (normal left inverted right x axis y axis) DVI-0 disconnected (normal left inverted right x axis y axis) LVDS connected 1400x1050+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1400x1050 59.9*+ 1024x768 60.0 800x600 60.3 640x480 59.9 S-video disconnected (normal left inverted right x axis y axis) -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman_at_es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 > > Doug > > ---------- Forwarded message ---------- > From: Doug Barton <dougb_at_FreeBSD.org> > To: Anton Berezin <tobez_at_tobez.org> > Cc: freebsd-x11_at_freebsd.org, freebsd-ports_at_freebsd.org > Date: Sun, 11 Nov 2007 14:01:55 > Subject: Re: X Can't "see" my docked monitor - xorg or nvidia? > > Thanks for responding, sorry it took so long to get back to you, $REAL_LIFE is > in my face lately. > > I was able to remove kde from the equation by starting good old windowmaker, > same results. > > On Wed, 7 Nov 2007, Anton Berezin wrote: > > > On Tue, Nov 06, 2007 at 01:19:18PM -0800, Doug Barton wrote: > >> > >> I just did the mondo upgrade of the ports on my up to date 8-current > >> laptop. Whereas before the upgrade the default video output would always be > >> the monitor attached to the dock if my laptop was in the dock (which was > >> what I wanted), now X refuses to see the dock at all, and it will only come > >> up on the laptop screen. > >> > >> The console works just fine on the dock's monitor, and I double-checked the > >> bios to make sure that the dock is set as primary video out. I also > >> commented out all mentions of the laptop's screen from xorg.conf, but it > >> steadfastly insists on coming up only on the laptop. > >> > >> All my ports are up to date, including kde 3.5.8, and nvidia-driver > >> 100.14.19. I also tried with and without the -ignoreABI option, no change. > >> I should also point out that I'm using kdm, but I was using it before the > >> upgrade too. Turning kdm off and using startx has no effect (still comes up > >> only on the laptop screen). > > > >> Any suggestions? > > > > The content of /var/log/Xorg.0.log might be useful, > > http://people.freebsd.org/~dougb/Xorg.0.log > > There are a couple of interesting sections: > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (WW) OS did not count PCI devices, guessing wildly > > and > (--) NVIDIA(0): Connected display device(s) on Quadro NVS 110M at PCI:1:0:0: > (--) NVIDIA(0): DELL 2001FP (CRT-0) > (--) NVIDIA(0): LPL (DFP-0) > (--) NVIDIA(0): DELL 2001FP (CRT-0): 400.0 MHz maximum pixel clock > (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock > (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS > > That all looks right, but > > (II) NVIDIA(0): Assigned Display Device: DFP-0 > > That should not be, since the only screen mentioned in xorg.conf > (http://people.freebsd.org/~dougb/xorg.conf) is the 2001FP. > > (WW) NVIDIA(0): No valid modes for "1600x1200"; removing. > > This makes sense because the laptop screen doesn't do that resolution, it's for > the 2001FP. > > > but also try and play with xrandr. Xrandr --verbose should tell you what > > outputs i actually sees, and then you can disable/enable individual outputs > > and see what happens. > > Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900 > default connected 1440x900+0+0 (0x19a) normal (normal) 0mm x 0mm > Identifier: 0x199 > Timestamp: 811385259 > Subpixel: unknown > Clones: > CRTC: 0 > CRTCs: 0 > 1440x900 (0x19a) 64.8MHz > h: width 1440 start 0 end 0 total 1440 skew 0 clock 45.0KHz > v: height 900 start 0 end 0 total 900 clock 50.0Hz > ... > > No mention of the 2001FP at all. > > > Thanks again, > > Doug > > -- > > This .signature sanitized for your protection > > _______________________________________________ > freebsd-ports_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > To unsubscribe, send any mail to "freebsd-ports-unsubscribe_at_freebsd.org" > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:22 UTC