So I've got these lovely IBM HS21 XM blades to play with, and I'm trying some tricks for automated setup. I'm writing a script that does the fdisk/bsdlabel/newfs stuff for me. Runs ok the first time around, but when I run it the second time around, I get this: # ./strap.sh GEOM******* Working _Lon device /dev/dAa0 ******* Bfdisk: ELWARNING line 2: :number of cylind Lers (8924) may babe out- of-range el (must be wit uhin 1-1024 for nfsormal/b BIOS operation,oo unless the entit re disk is rededicated to FremoeBSD)ve d. Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x20 fault code = supervisor read data, page not present instruction pointer = 0x8:0xffffffff8024ed1a stack pointer = 0x10:0xffffffff9ed24ba0 frame pointer = 0x10:0xffffff00035a5200 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 2 (g_event) trap number = 12 panic: page fault cpuid = 1 This is in single-user mode, booted via PXE. This happens when I run fdisk against the HDD on the blade so getting a crashdump is going to be tricky. fdisk is set up to allocate all space to slice 1, bsdlabel creates a 4G swap partition and gives the rest of the disk over to one large partition. newfs gives that filesystem a label of "boot". dmesg, strap.sh and associated files are attached. This machine isn't being actively used so I can run any debug needed. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA2 #0: Tue Nov 13 13:38:51 EST 2007 root_at_ginsu01.adl1.blueboxdevices.com:/usr/obj/usr/home/benno/build/src/sys/HS21 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5140 _at_ 2.33GHz (2333.43-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA> AMD Features=0x20000800<SYSCALL,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 13948989440 (13302 MB) avail memory = 13504835584 (12879 MB) ACPI APIC Table: <IBM SERBLADE> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic0 <Version 2.0> irqs 0-23 on motherboard registered firmware set <isp_1040> registered firmware set <isp_1040_it> registered firmware set <isp_1080> registered firmware set <isp_1080_it> registered firmware set <isp_12160> registered firmware set <isp_12160_it> registered firmware set <isp_2100> registered firmware set <isp_2200> registered firmware set <isp_2300> registered firmware set <isp_2322> registered firmware set <isp_2400> kbd1 at kbdmux0 acpi0: <IBM SERBLADE> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci7: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci9: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9 pci11: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci9 pci10: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci7 pci8: <ACPI PCI bus> on pcib5 isp0: <Qlogic ISP 2422 PCI FC-AL Adapter> port 0x5000-0x50ff mem 0xd6fff000-0xd6ffffff irq 25 at device 1.0 on pci8 isp0: [ITHREAD] isp0: Board Type 2422, Chip Revision 0x2, loaded F/W Revision 4.0.20 isp1: <Qlogic ISP 2422 PCI FC-AL Adapter> port 0x5100-0x51ff mem 0xd6ffe000-0xd6ffefff irq 26 at device 1.1 on pci8 isp1: [ITHREAD] isp1: Board Type 2422, Chip Revision 0x2, loaded F/W Revision 4.0.20 pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci15: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci12: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci14: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib9 pcib10: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib10 bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xda000000-0xdbffffff irq 17 at device 0.0 on pci4 miibus0: <MII bus> on bce0 brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0 brgphy0: 1000baseSX-FDX, auto bce0: Ethernet address: 00:1a:64:58:2a:fe bce0: [ITHREAD] bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x03000005); Flags( MFW MSI ) pcib11: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci5: <ACPI PCI bus> on pcib11 pcib12: <PCI-PCI bridge> at device 0.0 on pci5 pci6: <PCI bus> on pcib12 bce1: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xd8000000-0xd9ffffff irq 19 at device 0.0 on pci6 miibus1: <MII bus> on bce1 brgphy1: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus1 brgphy1: 1000baseSX-FDX, auto bce1: Ethernet address: 00:1a:64:58:2b:00 bce1: [ITHREAD] bce1: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x03000005); Flags( MSI ) pcib13: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib13 mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xdeffc000-0xdeffffff,0xdefe0000-0xdefeffff irq 16 at device 0.0 on pci2 mpt0: [ITHREAD] mpt0: MPI Version=1.5.14.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). uhci0: <UHCI (generic) USB controller> port 0x2200-0x221f irq 18 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x2600-0x261f irq 21 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x2800-0x281f irq 19 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9000000-0xf90003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 5 ports with 5 removable, self powered uhub4: <vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 2> on uhub3 uhub4: single transaction translator uhub4: 2 ports with 2 removable, self powered uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 3> on uhub4 uhub5: multiple transaction translators uhub5: 4 ports with 4 removable, self powered uhub6: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 4> on uhub5 uhub6: multiple transaction translators uhub6: 4 ports with 4 removable, self powered umass0: <Cypress Semiconductor USB2.0 Storage Device, class 0/0, rev 2.00/0.01, addr 5> on uhub6 pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib14 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xf8000000-0xf800ffff irq 22 at device 1.0 on pci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 31.2 (no driver attached) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio1: type 16550A, console sio1: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec bce0: link state changed to DOWN isp0: 0.0.0 FCP RESPONSE: 0x2 isp0: 0.0.0 FCP RESPONSE: 0x2 isp0: 0.0.0 FCP RESPONSE: 0x2 isp0: 0.0.0 FCP RESPONSE: 0x2 isp0: 0.0.0 FCP RESPONSE: 0x2 isp0: 0.0.0 FCP RESPONSE: 0x2 isp0: 0.0.1 FCP RESPONSE: 0x2 isp0: 0.0.2 FCP RESPONSE: 0x2 isp0: 0.0.3 FCP RESPONSE: 0x2 isp0: 0.0.4 FCP RESPONSE: 0x2 isp0: 0.0.5 FCP RESPONSE: 0x2 isp0: 0.0.6 FCP RESPONSE: 0x2 isp0: 0.0.7 FCP RESPONSE: 0x2 isp0: 0.0.8 FCP RESPONSE: 0x2 isp0: 0.0.9 FCP RESPONSE: 0x2 isp0: 0.0.10 FCP RESPONSE: 0x2 isp0: 0.0.11 FCP RESPONSE: 0x2 isp0: 0.0.12 FCP RESPONSE: 0x2 isp0: 0.0.13 FCP RESPONSE: 0x2 isp0: 0.0.14 FCP RESPONSE: 0x2 isp0: 0.0.15 FCP RESPONSE: 0x2 isp0: 0.0.16 FCP RESPONSE: 0x2 isp0: 0.0.17 FCP RESPONSE: 0x2 isp0: 0.0.18 FCP RESPONSE: 0x2 isp0: 0.0.19 FCP RESPONSE: 0x2 isp0: 0.0.20 FCP RESPONSE: 0x2 isp0: 0.0.21 FCP RESPONSE: 0x2 isp0: 0.0.22 FCP RESPONSE: 0x2 isp0: 0.0.23 FCP RESPONSE: 0x2 isp0: 0.0.24 FCP RESPONSE: 0x2 isp0: 0.0.25 FCP RESPONSE: 0x2 isp0: 0.0.26 FCP RESPONSE: 0x2 isp0: 0.0.27 FCP RESPONSE: 0x2 isp0: 0.0.28 FCP RESPONSE: 0x2 isp0: 0.0.29 FCP RESPONSE: 0x2 isp0: 0.0.30 FCP RESPONSE: 0x2 isp0: 0.0.31 FCP RESPONSE: 0x2 da1 at isp0 bus 0 target 0 lun 0 da1: <IBM 1726-4xx FAStT 0617> Fixed Direct Access SCSI-5 device da1: 400.000MB/s transfers da1: Command Queueing Enabled da1: 102400MB (209715200 512 byte sectors: 255H 63S/T 13054C) da0 at mpt0 bus 0 target 1 lun 0 da0: <IBM-ESXS ST973402SS B522> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) (da2:isp0:0:0:1): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:1): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:1): Logical unit not supported (da2:isp0:0:0:1): fatal error, failed to attach to device (da2:isp0:0:0:1): lost device (da2:isp0:0:0:1): removing device entry (da4:isp0:0:0:3): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:3): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:3): Logical unit not supported (da4:isp0:0:0:3): fatal error, failed to attach to device (da4:isp0:0:0:3): lost device (da4:isp0:0:0:3): removing device entry da3 at isp0 bus 0 target 0 lun 2 da3: <IBM 1726-4xx FAStT 0617> Fixed Direct Access SCSI-5 device da3: 400.000MB/s transfers da3: Command Queueing Enabled da3: 1142360MB (2339553280 512 byte sectors: 255H 63S/T 145630C) (da5:isp0:0:0:4): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da5:isp0:0:0:4): ILLEGAL REQUEST asc:25,0 (da5:isp0:0:0:4): Logical unit not supported (da5:isp0:0:0:4): fatal error, failed to attach to device (da5:isp0:0:0:4): lost device (da5:isp0:0:0:4): removing device entry (da2:isp0:0:0:5): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:5): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:5): Logical unit not supported (da2:isp0:0:0:5): fatal error, failed to attach to device (da2:isp0:0:0:5): lost device (da2:isp0:0:0:5): removing device entry (da4:isp0:0:0:6): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:6): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:6): Logical unit not supported (da4:isp0:0:0:6): fatal error, failed to attach to device (da4:isp0:0:0:6): lost device (da4:isp0:0:0:6): removing device entry (da2:isp0:0:0:7): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:7): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:7): Logical unit not supported (da2:isp0:0:0:7): fatal error, failed to attach to device (da2:isp0:0:0:7): lost device (da2:isp0:0:0:7): removing device entry (da5:isp0:0:0:8): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da5:isp0:0:0:8): ILLEGAL REQUEST asc:25,0 (da5:isp0:0:0:8): Logical unit not supported (da5:isp0:0:0:8): fatal error, failed to attach to device (da5:isp0:0:0:8): lost device (da5:isp0:0:0:8): removing device entry (da2:isp0:0:0:9): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:9): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:9): Logical unit not supported (da2:isp0:0:0:9): fatal error, failed to attach to device (da2:isp0:0:0:9): lost device (da2:isp0:0:0:9): removing device entry (da4:isp0:0:0:10): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:10): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:10): Logical unit not supported (da4:isp0:0:0:10): fatal error, failed to attach to device (da4:isp0:0:0:10): lost device (da4:isp0:0:0:10): removing device entry (da2:isp0:0:0:11): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:11): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:11): Logical unit not supported (da2:isp0:0:0:11): fatal error, failed to attach to device (da2:isp0:0:0:11): lost device (da2:isp0:0:0:11): removing device entry (da5:isp0:0:0:12): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da5:isp0:0:0:12): ILLEGAL REQUEST asc:25,0 (da5:isp0:0:0:12): Logical unit not supported (da5:isp0:0:0:12): fatal error, failed to attach to device (da5:isp0:0:0:12): lost device (da5:isp0:0:0:12): removing device entry (da2:isp0:0:0:13): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:13): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:13): Logical unit not supported (da2:isp0:0:0:13): fatal error, failed to attach to device (da2:isp0:0:0:13): lost device (da2:isp0:0:0:13): removing device entry (da4:isp0:0:0:14): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:14): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:14): Logical unit not supported (da4:isp0:0:0:14): fatal error, failed to attach to device (da4:isp0:0:0:14): lost device (da4:isp0:0:0:14): removing device entry (da2:isp0:0:0:15): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:15): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:15): Logical unit not supported (da2:isp0:0:0:15): fatal error, failed to attach to device (da2:isp0:0:0:15): lost device (da2:isp0:0:0:15): removing device entry (da5:isp0:0:0:16): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da5:isp0:0:0:16): ILLEGAL REQUEST asc:25,0 (da5:isp0:0:0:16): Logical unit not supported (da5:isp0:0:0:16): fatal error, failed to attach to device (da5:isp0:0:0:16): lost device (da5:isp0:0:0:16): removing device entry (da2:isp0:0:0:17): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:17): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:17): Logical unit not supported (da2:isp0:0:0:17): fatal error, failed to attach to device (da2:isp0:0:0:17): lost device (da2:isp0:0:0:17): removing device entry (da4:isp0:0:0:18): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:18): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:18): Logical unit not supported (da4:isp0:0:0:18): fatal error, failed to attach to device (da4:isp0:0:0:18): lost device (da4:isp0:0:0:18): removing device entry (da2:isp0:0:0:19): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:19): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:19): Logical unit not supported (da2:isp0:0:0:19): fatal error, failed to attach to device (da2:isp0:0:0:19): lost device (da2:isp0:0:0:19): removing device entry (da5:isp0:0:0:20): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da5:isp0:0:0:20): ILLEGAL REQUEST asc:25,0 (da5:isp0:0:0:20): Logical unit not supported (da5:isp0:0:0:20): fatal error, failed to attach to device (da5:isp0:0:0:20): lost device (da5:isp0:0:0:20): removing device entry (da2:isp0:0:0:21): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:21): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:21): Logical unit not supported (da2:isp0:0:0:21): fatal error, failed to attach to device (da2:isp0:0:0:21): lost device (da2:isp0:0:0:21): removing device entry (da4:isp0:0:0:22): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:22): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:22): Logical unit not supported (da4:isp0:0:0:22): fatal error, failed to attach to device (da4:isp0:0:0:22): lost device (da4:isp0:0:0:22): removing device entry (da2:isp0:0:0:23): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:23): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:23): Logical unit not supported (da2:isp0:0:0:23): fatal error, failed to attach to device (da2:isp0:0:0:23): lost device (da2:isp0:0:0:23): removing device entry (da5:isp0:0:0:24): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da5:isp0:0:0:24): ILLEGAL REQUEST asc:25,0 (da5:isp0:0:0:24): Logical unit not supported (da5:isp0:0:0:24): fatal error, failed to attach to device (da5:isp0:0:0:24): lost device (da5:isp0:0:0:24): removing device entry (da2:isp0:0:0:25): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:25): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:25): Logical unit not supported (da2:isp0:0:0:25): fatal error, failed to attach to device (da2:isp0:0:0:25): lost device (da2:isp0:0:0:25): removing device entry (da4:isp0:0:0:26): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:26): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:26): Logical unit not supported (da4:isp0:0:0:26): fatal error, failed to attach to device (da4:isp0:0:0:26): lost device (da4:isp0:0:0:26): removing device entry (da2:isp0:0:0:27): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:27): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:27): Logical unit not supported (da2:isp0:0:0:27): fatal error, failed to attach to device (da2:isp0:0:0:27): lost device (da2:isp0:0:0:27): removing device entry (da5:isp0:0:0:28): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da5:isp0:0:0:28): ILLEGAL REQUEST asc:25,0 (da5:isp0:0:0:28): Logical unit not supported (da5:isp0:0:0:28): fatal error, failed to attach to device (da5:isp0:0:0:28): lost device (da5:isp0:0:0:28): removing device entry (da2:isp0:0:0:29): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da2:isp0:0:0:29): ILLEGAL REQUEST asc:25,0 (da2:isp0:0:0:29): Logical unit not supported (da2:isp0:0:0:29): fatal error, failed to attach to device (da2:isp0:0:0:29): lost device (da2:isp0:0:0:29): removing device entry (da4:isp0:0:0:30): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:isp0:0:0:30): ILLEGAL REQUEST asc:25,0 (da4:isp0:0:0:30): Logical unit not supported (da4:isp0:0:0:30): fatal error, failed to attach to device (da4:isp0:0:0:30): lost device (da4:isp0:0:0:30): removing device entry da2 at isp0 bus 0 target 0 lun 31 da2: <IBM Universal Xport 0617> Fixed Direct Access SCSI-5 device da2: 400.000MB/s transfers da2: Command Queueing Enabled da2: 20MB (40960 512 byte sectors: 64H 32S/T 20C) cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <MATSHITA UJDA775 DVD/CDRW CA01> Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: cd present [277483 x 2048 byte records] SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 GEOM_LABEL: Label for provider da1s1 is ufs/fcboot1. isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.2 FCP RESPONSE: 0x2 (da3:isp0:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.2 FCP RESPONSE: 0x2 (da3:isp0:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0 GEOM_LABEL: Label for provider da3 is ufs/content01. isp0: 0.0.2 FCP RESPONSE: 0x2 (da3:isp0:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.2 FCP RESPONSE: 0x2 (da3:isp0:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.31 FCP RESPONSE: 0x2 (da2:isp0:0:0:31): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.31 FCP RESPONSE: 0x2 (da2:isp0:0:0:31): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.31 FCP RESPONSE: 0x2 (da2:isp0:0:0:31): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.31 FCP RESPONSE: 0x2 (da2:isp0:0:0:31): Synchronize cache failed, status == 0x59, scsi status == 0x0 GEOM_LABEL: Label for provider cd0 is iso9660/FreeBSD_Install. GEOM_LABEL: Label for provider da0s1a is ufs/boot. isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.2 FCP RESPONSE: 0x2 (da3:isp0:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.2 FCP RESPONSE: 0x2 (da3:isp0:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.2 FCP RESPONSE: 0x2 (da3:isp0:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 isp0: 0.0.0 FCP RESPONSE: 0x2 (da1:isp0:0:0:0): Synchronize cache failed, status == 0x59, scsi status == 0x0 Trying to mount root from nfs: bFcSe 1R:O OlTi:n k1 0s.t7a3t.e2 .c1h:a/nmgnetd to DOWN bce1: link state changed to UP Enter full pathname of shell or RETURN for /bin/sh: -- Benno Rice benno_at_jeamland.net
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:22 UTC