-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Where the saga left off: 1. With OEM DVD-RW on a P35/IHC9(R) [MSI Neo-F mobo] any attempt at I/O under 8-CURRENT AMD64 produced timeouts (i386 also but less severe) infinite loops 2. Problem was narrowed down to be potentially related to either SATA CD's in general or IHC9(R) 3. Jeremy Chadwhick sent me a Plextor PX-755A (SATA/150 DVD+/-RW) to attempt to isolate the problem 4. All ata patches have been applied up through Thurs. (currently doing a buildworld/kernel with the new stuff) The drive arrived and the following is the result: 1. Reads and writes fine for CD's 2. Does not write DVD's 3. Untested DVD reading 4. Does not create a /dev/dvdX (some documentation leads me to believe it should exist but I might be wrong) Here are the dmesgs, atacontrol and such: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #1: Thu Nov 15 19:17:50 EST 2007 aryeh_at_monster:/usr/obj/FreeBSD/FreeBSD-current/src/sys/MONSTER Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E6850 _at_ 3.00GHz (3005.68-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20000800<SYSCALL,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 4281409536 (4083 MB) avail memory = 4127895552 (3936 MB) ACPI APIC Table: <052107 APIC1013> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <052107 RSDT1013> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, dff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 86, should be 79 [20070320] est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 uhci0: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcdffc00-0xfcdfffff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered pcm0: <Intel 82801I High Definition Audio Controller> mem 0xfcdf8000-0xfcdfbfff irq 22 at device 27.0 on pci0 pcm0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <Marvell 88SX6121 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfceffc00-0xfcefffff irq 16 at device 0.0 on pci3 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfcfff000-0xfcffffff irq 17 at device 0.0 on pci4 re0: Using 2 MSI messages miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:19:db:b5:f8:0f re0: [FILTER] re0: [FILTER] uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 16 at device 29.3 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfcdff800-0xfcdffbff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 8 ports with 8 removable, self powered pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xf0000000-0xf7ffffff irq 17 at device 1.0 on pci5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata3: <ATA channel 0> on atapci1 ata3: [ITHREAD] ata4: <ATA channel 1> on atapci1 ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0 atapci2: [ITHREAD] ata5: <ATA channel 0> on atapci2 ata5: [ITHREAD] ata6: <ATA channel 1> on atapci2 ata6: [ITHREAD] acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Microsoft Comfort Optical Mouse 1000, class 0/0, rev 2.00/1.21, addr 2> on uhub0 ums0: 3 buttons and Z dir. fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Timecounters tick every 1.000 msec ad4: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata2-master UDMA133 GEOM_LABEL: Label for provider ad4 is ufad5: 238475MB <WDC WD2500JB-22REA0 20.00K20> at ata2-slave UDMA100 s/intdisk2. ad6: 476940MB <Seagate ST3500630AS 3.AAE> at ata3-master SATA300 acd0: DVDR <PLEXTOR DVDR PX-755A/1.08> at ata4-master SATA150 pcm0: <HDA Codec: Realtek ALC888> pcm0: <HDA Driver Revision: 20071020_0048> SMP: AP CPU #1 Launched! ATA channel 2: Master: ad4 <Maxtor 6Y200P0/YAR41BW0> ATA/ATAPI revision 7 Slave: ad5 <WDC WD2500JB-22REA0/20.00K20> ATA/ATAPI revision 7 ATA channel 3: Master: ad6 <ST3500630AS/3.AAE> Serial ATA II Slave: no device present ATA channel 4: Master: acd0 <PLEXTOR DVDR PX-755A/1.08> Serial ATA v1.0 Slave: no device present ATA channel 5: Master: no device present Slave: no device present ATA channel 6: Master: no device present Slave: no device present FreeBSD monster 8.0-CURRENT FreeBSD 8.0-CURRENT #1: Thu Nov 15 19:17:50 EST 2007 aryeh_at_monster:/usr/obj/FreeBSD/FreeBSD-current/src/sys/MONSTER amd64 - -- Aryeh M. Friedman Developer, not business, friendly http://www.flosoft-systems.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHQTOXJ9+1V27SttsRAhZ9AJ9E5NBWtH+pHACIN15/591kvv4AsQCeJIbN 2P1bijJKXfckXMX3KPyf2w8= =BMhv -----END PGP SIGNATURE-----Received on Mon Nov 19 2007 - 05:56:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:22 UTC